Last week I posted if nyone has bought from these guys recently.Didn't get much feedback. But,here's what's happened since then. I sent e-mails to all of their listed contacts,not one answer and a couple were returned. Ttied to call thier posted phone number.It's disconnected.(Same phone number...

I'm running the A7N8x Deluxe MB, 2200xp pro and 512mb pc3200 Samsung RAM with a FSB of 200MHZ. Seems to work fine and have had no problems so far. With a second case fan and just the standard cpu fan, my system hardly ever reaches past 44C. What have others with similar hardware config got...

I changed my CPU Speed setting in my BIOS from 100/100 to 133/133. After changing it, I ran that SiSoft Sandra utilty and it said my CPU speed had increased from 1.0 GHZ to 1.47 GHZ...........!!!! Amazing. My CPU is an AMD Athlon XP 1100 by the way. Then, 2 days later, I decided to run it again...

ok please do not suggest me to switch heatsink or switch to a liquid cooling system... i have an a7n8x with barton 2500 OC to 3200 with a akasa silver mountain cooler... the cooler is ok the temp is 53 under stress and 38 idle (with a room temp of 32!! very hot summer in italy ..) very stable (ran...

I upgraded my video card from an GeForce 2 GTX to a GeForce 4 4800/128, and installed a 1.33 Tbird Athlon into my PC Chips M830L mobo. Now I cannot bring the processor up to 1.33 gHz without the system crashing to the Missing or Corrupt SYSTEM File error. When I take it back down to 1.0 gHz the...

HI My manual has gone missing, but i found this using the info on my box. I seem to be getting problems from the official jetway site, that did say 1.4 was the biggest and no XP chip im sure last time i saw it. this is my mobo i think http://www.j-mark.com/PRODUCT/mb/j867V266B.htm

what is the general thoughts on the Aquarius II water cooler? http://www.thermaltake.com/products/AquariusII/aquariusII.htm Soupladel

Hi, I currently have a Soyo DUP+ KT400 yada-yada, with a 2200+ stuck on it. I'm running Corsair XMS 512 3200 RAM and twin WDC 80GB Drives in RAID 0. My problem: Damn thing is slow. Not 80486 slow, but I feel that this system should have more potential. Sisoft laughs at me and my benchmarks are WAY...

I have a Vantec AeroFlow C7040 and it is quiet BUT that is very subjective to the room you are in and also case fans etc in your case. If you have no case fans and the cpu cooler is the only fan in there the it may be too loud for you. If you are looking for an ultra quiet cooler for the likes of...

I have just built a system with a MSI k7n2g ilsr mainboard with an XP 2600+. CPU temperature shows between 55C and 59C. Is this normal? The cpu was boxed and uses the standard amd cooler and fan. Thanks in advance. Rob

Crossposted. Quoted From the "AMD Athlon™ 64 Processor Thermal Design Guide" Page 22 Thermal Interface Material "The heat sink makes contact with the top surface of the processor package utilizing the thermal interface material between the processor lid and the heat sink. AMD recommends using a...

I just got myself a 2700+ and was wondering how you could tell the difference between a TBred A or B core? I know it is easier to overclock with a B core and wanted to find out how to go about with it. Thanks. Eric B.

Hi all, I wonder if any one could help me, I bought an AMD Athlon XP 3000+ yesterday to go into my new MSI K7N2 Delta motherboard with nFORCE 2. I also put in 512Mb of PC3200 DDR400 Ram in there. I installed the processor and memory, and then went to turn it on. All was well, the computer halted...

Jon ) wrote... Hi, I'm looking at buying a retail boxed Athlon XP soon. I know the box includes a heatsink/fan, but was wondering if it also included the thermal paste/grease to put between the CPU and heatsink? Or is the whole point of the retail box...

Well since late jan Ive been trying to get my 2100+ to run over 200Mhz FSB. I was using a rev 1.04 A7N8X and couldnt get the ******* over 12.5x180. Right now sitting at 11x210 on a rev 2.0 A7N8X board. I got same board but newer rev because I really didnt feel like totally re-installing windows...

Hi! Looking for a ocZ EL DDR PC-3500 Dual Channel Platinum kit (OCZ4331024ELPEDC-K). Anyone know where I can find this in stock and at a desent price in the US? Any comments on using it with a Asus A7N8X-Dx v2.0 and Barton 2500+ ?? Would this be a better buy than the Kingston HyperX PC3500 DC...

what is the fastest a cpu can go ? I have been told there is a limit on how many Mhz you can get out of a cpu

I have been trying to capture some VHS tapes at 720x480 using HuffyUV and am getting large numbers of frame drops - e.g. about 60 one drops and the same number of two drops in 10,000 frames. It really screws the sync. I defraggged my partition and have set my WD Caviar HDs to Use DMA if avail. It...

Hi I have a Duron 700, m/board says it will goto 1.4 NOT XP tho... Its not a bad puter, dvd, burner etc, plays thee games i want, just a coupl out that need more mhz.....but wondering should say i get a new xp2000 system, maybe a 1800 at a low price? IS there much differance between a older chip...

Hello all Running a 1700+ on an MSI nforce1 board and am currently limited to a 12.5 multiplier (FDD controllers shot and I can't flash the BIOS to get it higher). Therefore running at 12.5 x 133 ~ 1.66 GHz @ 1.5 V stable. (FSB will go a bit higher but the PC is unstable - I'm using 764MB PC2100...