I've just replaced two 19CFM fans with 40CFM units - owing to the current UK heatwave (36C). Rather than fork out for a thermal control panel, I'd like to do the 7v mod trick on the new fans - and hook it up to a switch. Any help appreciated. TIA QED, eh ?

"who be dat?" wrote in message ... Hey everyone. I've got an Audigy sound card in my AMD system. Like several others, I'm not all that happy with it. Creative's drivers simply suck. I'm looking to upgrade shortly after AMD releases...

Hiya Soupladel... if you can do it, the 2400+ will run ok at an FSB of 200 with a 10x multiplier. But I currently cannot even get another 50Mhz out of the CPU no matter how I screw with the FSBxMultiplier combos and I did try taking VCore up a bit (no higher than 1.725 - I'd rather have it 'stock'...

what ist the highest temp. for an Athlon 2000XP ? thx Andreas

I recently bought a 2nd hand base unit for relatively cheap money. I pulled it apart and the cpu is an athlon xp1700. The codes are AXDA1700DL3TC and RIWGA0234UPMW. What are my chances of getting a good overclock out of it, or is it only worth putting in a budget system. Its currently on an...

http://www.amdmb.com/article-display.php?ArticleID=242&PageID=3 "Bill L" wrote in message ... Hello all Currently running a TB 1700+ 1.47 GHz @ 2.2 GHz (11 x 200 @ 1.625 V) on an Abit NF7-S 2.0 board. CPU...

AMD Athlon XP2500+ 1.833 GHz 333 MHz bus - Socket A (Barton) processor, 512 kb. 66£ AMD Athlon XP2400+ 2.0 GHz 266 MHz bus - Socket A (Thoroughbred) processor 62£ what is better? :)

********************************************************* * This article is posted by an unregistered version of: * Newsgroup AutoPoster PRO version 1.3.7 ********************************************************* We know it sounds TOO good to BE true, but it’s REAL! Our International...

********************************************************* * This article is posted by an unregistered version of: * Newsgroup AutoPoster PRO version 1.3.7 ********************************************************* We know it sounds TOO good to BE true, but it’s REAL! Our International...

I have an AMD XP 2500+ (barton). I am going to buy a new motherboard. If i get the A7N8X Deluxe ver. 2 can I just put my chip in and change the multiplier in the bios, or do I have to do something to the chip its self? Also what is the difference between the board above and the Non deluxe version...

Hi Flossie, "Flossie" wrote in message ... Do any of you guys know what the maximum cpu temp of a 2400+ XP cpu is as i can not find any reference on amd`s website.. It a damm hot day here and the System @ 45c and the CPU @ 61c. I...

Im in the middle of upgrading my ageing pc, but need some advice on motherboards. Id like to keep my old TNT2 32Mb video card, don't use my pc for games and its fine for my needs, but its AGP 1.0 (3.3v) and most new motherboards have 1.5v AGP slots. So the options are...

Hi all, Just wondering if anyone else here has an Athlon 2800 Barton and what temps you are seeing for idle/load? I am getting idle temps of around 45 degrees C and around 52 deg (Prime) load which seems a bit high to me (considering the cpu is not clocked). The above temps are with the case...

Comments HOW TO TURN SIX POUNDS INTO SIX THOUSAND: READING THIS COULD CHANGE YOUR LIFE! IT DOES WORK! I found this on a bulletin board and decided to try it. A little while back, I was browsing through newsgroups, just like you are now, and came across an article similar to this that said you could...

Volcano 9+? I'm using a Volcano 9 and I've heard of the Volcano 11, But a 9+, that's a new one to Me. V Bobier -- "SpLiZaaT" wrote in message ... the volcano 7 sucks i am sorry to inform...get the 9+...it keeps my amd ...

Is OCZ a reliable brand of ram? They are the only ones who make PC 3700 512 meg cas2 sticks. They are not cheap, about $470.00 for a pair. Please reply is anyone has info, thanks. -- Asus A7N8X deluxe rev. 2.0 AMD XP 3200+, 400fsb Corsair XMS PC 3500, 512 meg x 2, dual channel mode ATI Radeon...

xp2400+ thoroughbred?

But I did not expect this. MSI K7N2 Delta L MS-6570 mainboard Vantec copper HSF (the 6800rpm one) 2 x 256 PC3200 Geil mem WinXP pro SP1 (this OS rocks) I built this last night and today I decided to overclock a little. Moved the multiplier up from 11 to 12 and left the vcore at 1.65 with no...

I recently built a system with this combo XP2600 Soyo SY-KT400 Lite Mobo 2 X 256 PC2700 1) Sometimes I have problem to boot up. The system just won't boot without any video. Do you guys have any idea. 2)

On Mon, 7 Jul 2003 22:21:49 -0400, "Frank Hagan" wrote: Thinking of getting away from VIA KT400. Don't need Raid or SATA. These two boards have NF2 400 chipsets and are reasonably priced. (AN35N $66 USD delivered and Soltek NV400 $76 USD delivered) I'll be switching...