Stop Grant was what was brought up by another user, I think this is the same thing as what your describing, it's not a halt as such, but a function that these boards can use (like to keep the cpu from overheating, and allow it to keep running).. the board allows CPU throttle (I think that's what...

hi only one way to know....no reason why it wont work coco "dA mAn" skrev i meddelandet ... Hi,

In article Gu3Pa.22885$H17.7089@sccrnsc02, says... Is it too big for Athlon 2000 + ? No. Doug

Got me stumped. Soltek SL-75KAV mobo, F5 build, got current Q11 BIOS According to maufacturers website, Q11 BIOs and F1 build upwards will run up to XP2700 Duron 750 CPU FSB set at 100mhz, multiplier and voltage set to auto Runs happily.

This is kinda old... but never the less may be over looked by most MSI KT3 ULTRA2 users. There's a bios upgrade on the MSI website that allows for the use of Barton 3000+ chips. Here's the english text from the upgrade readme... KT3 Ultra / KT3 Ultra2 / KT3 Ultra-ARU / K7T266 Pro2-A (MS-6380E)...

"Mattrix" wrote in message ... The only other thing I can think of trying perhaps is: I should try clearing the CMOS, possibly "unsticking" this 11X multi from memory from when it had the XP1700+ T-Bred "B"...

http://www.ebuyer.com/customer/products/index.html?action=UFNQcm9kdWN0U2VhcmNoUmVzdWx0cw%3D%3D&cat_uid=23&subcat_uid=413&order_col=sell_price&order=ASC&_LOC=UK Probably not the best but if you need something cheap to get going . . .

I have this Soyo KT400 Dragon lite, and XP2600 for about a week (not overclocked). The Bios has the following temps showing: 1) CPU TEMP. EXTERNAL 42C 2) CHA TEMP. 38C 3) CPU TEMP. ON DIE 55C The reading is recorded at idle. Are these temps normal, and why it shows...

As it happens I have, but, I am talking about average sort of expectations... Oh bugger, I will post MY OWN results ASAP... I do not expect it to overclock well... But who knows.

I want to buy xp1800+ / 1900+ in a box. My question is how to know it tbread a or tbread b or palomino ?

fourcleedgluhog wrote: Does anyone have an idea if getting thermal grease onto the bridges and components on top of an AMD T-bird 1200 cause it to short out and fry? I pulled a bonehead maneuver and put too much on when I put the heatsink on and it oozed out...

Hello, i have this motherboard (lastest bios) and a amd xp 2100, by default it is works at 2000 mhz, 100 Mhz fsb and very stable. The problem is that i have a msi ti4200, and the system has becomes very inestable, reboot every 4 minutes, with the gforce2 work very fine. I try with the old amd xp...

Hello all Running a 1700+ on an MSI nforce1 board and am currently limited to a 12.5 multiplier (FDD controllers shot and I can't flash the BIOS to get it higher). Therefore running at 12.5 x 133 ~ 1.66 GHz @ 1.5 V stable. (FSB will go a bit higher but the PC is unstable - I'm using 764MB PC2100...

Hi I have a Duron 700, m/board says it will goto 1.4 NOT XP tho... Its not a bad puter, dvd, burner etc, plays thee games i want, just a coupl out that need more mhz.....but wondering should say i get a new xp2000 system, maybe a 1800 at a low price? IS there much differance between a older chip...

I have been trying to capture some VHS tapes at 720x480 using HuffyUV and am getting large numbers of frame drops - e.g. about 60 one drops and the same number of two drops in 10,000 frames. It really screws the sync. I defraggged my partition and have set my WD Caviar HDs to Use DMA if avail. It...

what is the fastest a cpu can go ? I have been told there is a limit on how many Mhz you can get out of a cpu

Hi! Looking for a ocZ EL DDR PC-3500 Dual Channel Platinum kit (OCZ4331024ELPEDC-K). Anyone know where I can find this in stock and at a desent price in the US? Any comments on using it with a Asus A7N8X-Dx v2.0 and Barton 2500+ ?? Would this be a better buy than the Kingston HyperX PC3500 DC...

Well since late jan Ive been trying to get my 2100+ to run over 200Mhz FSB. I was using a rev 1.04 A7N8X and couldnt get the ******* over 12.5x180. Right now sitting at 11x210 on a rev 2.0 A7N8X board. I got same board but newer rev because I really didnt feel like totally re-installing windows...

Jon ) wrote... Hi, I'm looking at buying a retail boxed Athlon XP soon. I know the box includes a heatsink/fan, but was wondering if it also included the thermal paste/grease to put between the CPU and heatsink? Or is the whole point of the retail box...

Hi all, I wonder if any one could help me, I bought an AMD Athlon XP 3000+ yesterday to go into my new MSI K7N2 Delta motherboard with nFORCE 2. I also put in 512Mb of PC3200 DDR400 Ram in there. I installed the processor and memory, and then went to turn it on. All was well, the computer halted...