X-No-Archive: yes Just upgraded my processor from a P4 1.7 - P4 3.06ghz. The problem is Windows 98 SE always locks up at the same point at the start. I established that the system is stable by putting windows XP on an external hard drive and running PRIME95 & MEMTEST. Both ran fine for hours...

I'm new to overclocking, and am particularly confused by memory options. I'll be putting together a new machine shortly, based on the following: Pentium 2.8C Asus P4S800D-E Already have a SATA drive, OpenGL card (FireGL X1), and CD/DVD drives. Any suggestions for RAM? Looking to get 2 sticks of...

First, the hardwa Abit NF7-S 2.0 Barton 2500+ (OC'd to 3200+ at 1.75V (MBM says 1.71-1.73)) Not mobile, not locked Thermalright SLK-800A with AS3 and generic 80mm fan 2 256M sticks of Elixir DDR400 (won't run dual channel) Sapphire Radeon 9800pro (128M) Maxtor 80G 7200rpm SATA hard disk Old...

I have ASUS P4C800 deluxe Pentium 2.8C 2x256 Corsair xms 3500 @ 433 My Bios settings ADVANCED JUMPERFREE CONFIGURATION AI OVERCLOK TUNER: CPU EX FREQ: DRAM FREQ:

Softmenu Setup - AGP VDDQ Voltage: 1.55 Voltage Monitoring - NB/AGP Core Voltage: 1.57 Why does it say under the monitoring tab NB/AGP? Is that meaning Northbridge? I noticed allot of people who overclock their P4's set the AGP to 1.6v or

Anyone have any experience with this board? Love it, hate it, know of any reviews of it? http://www.msicomputer.com/product/detail_spec/product_detail.asp?model=865PE_Neo2-PFS_(Platinum_Edition)

I have a Diamond Viper 330 PCI graphics card. I believe there was software for overclocking it. Does anyone know where I can find this? Thanks Paul

Well, after removing the IHS from my Tualatin Celly 1.3GHz CPU I looked around my parts area and found the only Socket 370 board I have that is capable of running Coppermines was the aforementioned GA-6WMMC7. It's a fairly Crap(tm) board, mATX, on-board graphics that use system RAM, no AGP slot and...

I've bought new harddisc Maxtor Diamondmax plus, and my problems start when I try to insall it. I've connect it on the first IDE channel like master, and the old harddisc IBM like slave. On the second IDE channel is dvd and cd/rw devices. But the BIOS (AMIBIOS) didn't recognise any device!...

Hi, This may be a little of topic but...... My 7VAXP Ultra went faulty and after nearly 6 weeks the supplier has said Gigabyte are dragging they heels over the replacement. He has gave me a DFI NF2 Ultra in its place. Does anyone have any experience of these mobos? Are they any good? I know...

I recently purchased a Sony GRT360ZG, but I do not like the performance, especially when running on batteries. I downloaded wcpuid, and similar from intel. It informs me that the data bus is over clocked when on batteries. What does this mean? How does this affect performance. It is suspos to...

I remember coming across a page that gave time frames of expected cuts in CPU prices. I can't remember if I read it in an article or if it was a dedicated page with price cut predictions.

"nondisputandum.com" wrote Using only the multiplication factor, my P4 system 3.0 Ghz - 800 Mhz FSB now runs at 3.6 Ghz on an Asus P4P800-E Deluxe Hi, what do you mean by "the multiplication factor" Nice overclock :) -- Wayne ][

After all those years I never had problems with my IBM PC, but now I think that 4.77 Mhz is a little bit slow. How can I overclock a 4.77 8088 IBM XT , how much performance will I get? Please help.

Hi all, I'm feeling a bit retro at the moment and I've been having a look around to find out what the best super7 mobo is, and it turns out it's this one. Does anyone know of anywhere where it can still be found, second hand etc.? Maybe there is someone willing to sell me theirs as they've got...

i have an xp2500 o/c'd to 3200 on stock voltages on an EP-8KRA2+ and all seems well but i can get more out of the FSB. the system will run fine at 205 FSB (410) but some of the sounds on my SBLive 5.1 start to corrupt, is there any way to lock the PCI bus but increase the FSB as the system runs...

Where can I get SPEC benchies??? like CPU95,CPU2000,....was searching on internet without result. TIA!

Anyone have any tips on removing the glue residue from the "protective" plastic cover on the Thermalright SLK-948U heatsink ? I hit the thing with 91% iso alcohol and then Xylene. Still see some glazed residue pattern on the surface. They should paint the space shuttle with this stuff. Got to...

What is the best, the Pentium 3ghz or an Athlon 64 3000+ Processor. Any advice would be appreciated. Debbie

Hi all, i'm searching for cheap and good quality stores to buy online. I c newegg its great but it seems that they don't ship international and I'm from Barcelona(Spain). Let's see if u can help me looking for the best sites of internet. Another question, Is Ebay a good place to buy? Thanx in...