|
|
cpu failure? by
jethro bodine
I'm having a problem with a pc I built 6 months ago.
Epox 8RDA mobo
AMD XP1800 cpu
enlight case
DDR 2100
Asus Geforce4 Ti4200 AGX video card
No mods or overclocking. It will not boot. The fans run and I can hear
the hard drive spin and chatter normally on boot. Onboard display reads ff
which...
|
|
5 |
241 |
|
|
Want to get USB 2.0 to the front of the case port by
Harrison
My mainboard only supports USB 1.1, but I have a 2.0 external drive.
For convenience, I'd like to connect the drive to the port on the
front of the case, but that port is connected via pins to the
mainboard.
I've founf USB 2.0 PCI cards which have an internal USB connector, but
the connector is a...
|
|
2 |
877 |
|
|
Dog & Cat lovers everywhere by
Phrederik
"John Baker" wrote in message
...
Dog & Cat lovers everywhere
Regards,
Digitalgoods
http://www.digitalgoofs.tk
Posting host: 82.38.233.67
|
|
0 |
352 |
|
|
ASROCK Motherboard by
S.Heenan
"Werner Huysmans"wrote:
ASROCK K7V2 (AMD)
I had problems installing Windows 2000 / 2000 Server on this Board !
Perhaps you could be a little more specific as to the problem you had.
Drivers ? Hardware ? Some thing else ?
Drivers can be downloaded...
|
|
1 |
746 |
|
|
bios upgrades by
James
is there a dedicated good bios update web site anywhere?
thanks
|
|
3 |
567 |
|
|
Questions about Norton Ghost and partitions. by
MacG
Hi all,
I've got a 120G drive that I would like to partition in 60G portions.
One portion will be ntfs and the second, fat32.
How would I go abouts setting up the partitions with fdisk?
Setting up the 60G half as fat32 is straight forward, but I believe the
remainding space
is automatically issued...
( 1 2)
|
|
10 |
1,430 |
|
|
IEDLL.ex corrupt - help! by
Lucky50
I am using a Hewlett Packard Pavilion, with Windows 98. When I boot up, I
get an error message that says:
"The C:\windows\iedll.exe appears to be corrupt. Reinstall the file and try
again."
What is this file for? How can I reinstall it? Or get rid of it, assuming it
is not a necessary file.
--
|
September 15th 03 03:17 PM
by YoKenny
|
4 |
417 |
|
|
spam THOSE ANNOYING POP UP MESSAGES. by
YoKenny
NOMORE wrote:
Want to stop those annoying pop up messages
Without spending $30+ on software.
---
MAF Anti-Spam ID: 20030907125819Y7x6RvG8
NNTP-Posting-Host: 213.104.67.41
Send with full headers to
|
September 15th 03 03:11 PM
by YoKenny
|
0 |
909 |
|
|
RAID DMA ? by
Neil
Hi, I have recently installed two Maxtor 80gig's as a RAID 0 array.
Everything has been fine, but I just noticed in an information window that
DMA is turned off on the RAID devices. Is it actually possible to enable it
'coz i cant find it in the usual places in hardware manager (DMA for IDE1/2
is...
|
September 15th 03 02:28 PM
by Neil
|
0 |
209 |
|
|
Interesting Article about cpu cooling by
Robotnik
http://www6.tomshardware.com/cpu/20010917/
Hey, this is a pretty interesting article I came accross..... There's also a
video in there some where. It requires I think 4. or 5. something codecs of
divx.....I think the link they provide for the codec is broken.......just go
to the divx website and...
|
|
5 |
1,125 |
|
|
My WD HD doesn't show up in bios? by
Xel Lagaffe
Hi group,
after one of my disks went on extended holiday, the ide0 primary HD (a WDC
80Gb) isn't showing up in the bios. Well, if I wait about 1 minute or so,
it finally decides to activate and start up, and showing it self in the bios
as well. But I cant set this drive to boot in the boot...
|
|
4 |
417 |
|
|
CD burner problem by
ROTC Jeep List
For the past month or longer, I've had a hard time burning any CD.
I thought maybe my discs had gone bad from leaving them in the sun too long,
but now I have a new set and they won't work either. It never gets past 3%
completion under Nero; while HP Record Now, CDRWin, and the CD wizard...
|
|
5 |
839 |
|
|
Random hangs on KT133 and KT333 with raid by
kony
On Thu, 11 Sep 2003 15:56:53 GMT, John wrote:
Ive had tons of problems with these boards.
I think it would be more fair to menton specific board makes,
revisions, and system configs, since obviously something is unique and
causing this, but NOT lumped all together like a rant,...
|
September 15th 03 09:46 AM
by kony
|
5 |
1,065 |
|
|
Need help with fan replacment by
James Luff
Hi,
I have a very old P120MHz processor which is cooled by a heat sink and fan.
Due to it's age after recently transporting the machine the heat sink and
fan fell off the processor. As a result the fan no longer works and needs
replacing, the question is, where can I get hold of a socket 7 fan and...
|
|
3 |
1,022 |
|
|
HP ZT1000 series laptop LCD going dim by
Chu-Chu
Sometimes when I open my HP laptop, the screen goes dim. I can see the
desktop if I look closely. Sometimes if I close the lid halfway, then
open it, it goes back to normal. Usually I just have to restart. Also
sometimes when I restart and touch the keyboard to type, the screen goes
dim again. ...
|
|
4 |
792 |
|
|
IBM PC 300PL / Maxtor 60GBHD: 1780 HD Error on Reboot by
Gerry Wolfe
The box is an old IBM PC 300PL with a 300 MHz PII processor, 256MB RAM
and a Maxtor 60GB drive. Also has CD burner, 56KB PCI modem, generic
soundblaster.
Seems like whenever there is an automatic reboot, I get a 1780 HD
error message in the BIOS diagnostics e.g. during the original Win98
install,...
|
|
1 |
746 |
|
|
Notebook by
~misfit~
"D'Vint" wrote in message
...
Is it posible to use a laptop like a remote controll, like for the TV,
DVD,
Stereo
etc. etc. ? It would be perfect if I could controll every application with
one controll.
I know theres...
|
|
0 |
450 |
|
|
failed hard drive by
quile
I have had 2 hard drives go bad in the same computer in 6 months. Other
than just faulty drives, does anyone have any ideas on what may be causing
this?
Thanks,
John
|
|
6 |
691 |
|
|
Extender by
J. Yazel
Where can I get a 6" IDE drive cable extender (male on one end,
female on the other)?
I want to add a second drive and the drive mounts are further
than 6" apart (the normal spacing).
Thanks.
Jack
|
|
6 |
390 |
|
|
HELP, SATA Hard Disk by
YKK
Help! I bought a new set of computer using SATA 80GB hard disk and found
the following problem:
1. boot up with Win98 boot disk, using FDISK, connot create patition.
Then, I use Patition manager, create partition and try to copy file into it,
it show me "writing error"
2. Then I use Win XP...
( 1 2)
|
September 14th 03 09:46 PM
by adrian
|
12 |
1,603 |