Looks like AMD getting geared up to make its Socket 754 its primary platform, for both 32-bit and 64-bit chips. http://www.xbitlabs.com/news/cpu/display/20030821060723.html They're talking about a version of the Athlon XP (i.e. 32-bit Athlon) which fits on the Socket 754, codenamed Paris and...

I recently put together two systems. The first was an ASUS A7N8X DLX and I bought a matched pair of corsair xms DDR-400 memory. That worked o.k. and I ordered the same type of memory for the 865PERL mombo. I cannot seem to get it to be recognized as anything other than DDR-266. With a 2.4...

(Sonu) wrote in message ... Hi all, I asm trying to access the video port (i.e conventional VGA port) which is connected to the monitor via a DSUB line. Okay there are various issues here that you haven't considered...

Hi, I recently came across a problem with computations involving float operand and a double result. On the test code below, i86 CPUs have a consistent behaviour OS- and compiler-wise (tested on Linux + gcc 3.2 and Windows + VS6), and other CPU types (Sparc, MIPS and Intel ia64) exhibit different...

I am on my second D875PBZ board. The first board had problems from the start. This second board was ok for a good 2 months. The only significant change was updating to the P.15 BIOS. Here's the problem. On boot, I get a lot of lines on the screen. The boot takes longer than usual. Is the...

Should an Intel D865PERL motherboard running Win2K+SP4 be capable of controlling 160 GB hard drives natively (without using an add-on controller card)?. Mine only sees first first 128 GBs. Any help would be appreciated.

Hello. I would like to know on which cases i have to install DDR memory in pairs if i use the D865PERL. Thanks in advance. Balbino

This article mentions the various interconnect methods that people are trying on some of the fastest supercomputers on the planet: http://www.siliconstrategies.com/article/showArticle.jhtml?articleId=13100603 or http://makeashorterlink.com/?Z18C422A5 Opteron highlights:

John Brock wrote: I'm planning on buying a new PC this week (there's a sale!), and I have the option of buying a 2.8GHz P4 with a 533MHz FSB or a 2.8GHz P4 with Hyper-Threading and an 800MHz FSB for almost the same price. My first question is does this matter at all for the average...

Hello! I am trying to get ACPI S3 Suspend to Ram to work on a 2.0GHz P4 and D845EBG2 motherboard. I have five other machines on which it works perfectly: two PIII Intel D815EEA boards, two PIII Intel D815EEA2 boards, and one old Gigabyte board with a Celeron 333 on it. All computers are hooked to...

You do not need any drivers if you are not using RAID. Just run a regular WinXP install. The SATA drives are handled as standard EIDE drives. Just run install and don't use the F6 option. "Stephen Perez" wrote in...

In article , bbbl67 @yahoo.com says... AMD's Hypertransport gained two more major chip players in IBM and TI. Also joining were EMC and Network Appliance in the storage field. ...

Hi, Who can help? When I boot my system, I got a message by checking de master/slave connections: SMART Failure Predicted on Primary Master: Maxtor...... (the HD) They advise me to make a bachup and to change my HD. By pressing F1 windows

most likely, a dead mobo. "DAVE" wrote in message ... I got a p4 gateway system here for repair and when you power it up only the amber light lights up (sleep mode) and all the fans spin up but thats it. I was...

Alright, I purchased a retail boxed 3.0 HT 800mhz bus P4 recently. The (built-in?) fan on the heatsink is blowing into the heatsink and really struggling to get air moving and is whining as a result of this. It's very annoying. I have tried plugging the fan into the different fan headers on my...

You don't mention your video card. Are you running the onboard video? If your answer, to the above, is 'not onboard'... Try this, in this order: Update CMOS (motherboard). Update motheboard drivers. However, I'm suspecting a corrups BIOS. - iname1030 stood up at show-n-tell, in

"David Schwartz" wrote in message ... "Robert R Kircher, Jr." wrote in message ... If it turns out that my chassis has the standard 20 pin connector, do I need to ...

http://money.cnn.com/2003/08/27/commentary/game_over/column_gaming/index.htm

I'm preparing to build a system using this board. I am reading the manuals from the Intel support site and had the following questions: 1. If I install two SATA drives (attached to the 2 SATA connectors) and "RAID them", will the latest version of Ghost (or DriveImage) be able to image the RAIDed...

My apologies. I meant the P.12 BIOS that Intel recently posted on its website. I believe the problem is a video card. I swapped a new ATI AIW 9700, and the lines disappeared. Thanks. Tom