|
|
P4P800 Dual DDR Issue by
Jesse
Hi, I'm trying to use 2 x 256mb twinmos dimms with ch-5 winbond chips in
dual ddr mode on my asus p4p800 motherboard. However whenever the dimms are
in a dual ddr configuration the machine refuses to boot with a 2:3 (266mhz)
memory divider. I can use the (333mhz) 4:5 divider but my fsb max's out...
|
July 19th 03 02:36 AM
by Jesse
|
1 |
1,363 |
|
|
HSF Recommendation Please by
yawny
Hey all,
Well I f**ked up and broke one of the tabs on the processor socket
that the HSF clip hooks onto. Running a MSI 815E Pro board with a 1GHz
PIII. Can someone recommend one that uses the other tabs to secure the
clip?? Does one exist??
I don't need anything fancy. Just something that would...
|
July 18th 03 08:07 PM
by yawny
|
2 |
430 |
|
|
Zalman 7000-Cu or 7000-AlCu by
John Smith
The correct model is CNPS7000-AlCu?
J.
"John Smith" wrote in message
...
Also, have these ones now replaced the flower as the 'better' coolers in
terms of noise? Or did the flower occupy too much room?
|
|
3 |
667 |
|
|
Overclock ti 4200 : less performance by
Samuel
Hello,
I've tried to overclock my ti 4200 (INNO : 250/446 ) with Nvidia 41.09
drivers.
Without overclock, I'm around 12 500 pts with 3mark 2001, but with
overcloack to 380/500 I only got 10 500 pts to 3dmark 2001.
What's wrong, please ??? (with simple words, I'm french, thanks)
Config :
|
July 18th 03 01:46 PM
by Samuel
|
1 |
1,133 |
|
|
Vantec VA4-C7040 fan is oscillating and creates vibrations, noise by
Meginjarder
I bought this very efficient cooler after a review I read on tom's.
However the fan mounted on top of the CPU makes a noticeable
vibration. When it speeds up to it's some 4000 rpms it starts to shake
back and forth, oscillate I think, and it both makes an low but
audible drone, it creates...
|
|
2 |
427 |
|
|
could it be my mem? by
Justice
I have the following
a7v266-e (asus)
xp1700 palimino
ati 8500
512 genaric 2100 ram
I cant seem to get past 148 fsb, temps are 50c while under load. even at
149 fsb crash hear ther everywhere, same temps. if I were to use say
pc2700 ram chips would that help???
|
|
0 |
433 |
|
|
Need help with water cooling by
Mr. Teatime
I bought a water cooling kit from maplin in the UK but the instructions are
useless (Translated from japanese I think), so I don't know how to set it up
at all. the URL for the kit is
http://www.maplin.co.uk/products/module.asp?CartID=448118&moduleno=32469&Products=1
I also bought a large radiator...
|
|
5 |
1,104 |
|
|
Ping Spajky: MSI 6163 Q again! by
~misfit~
Hey Dave,
"kony" wrote in message
...
On Mon, 14 Jul 2003 13:14:44 +1200, "~misfit~"
wrote:
Hi Spajky,
I'm about to put a celly 900 coppermine in a slocket in one of my 6163
( 1 2)
|
|
10 |
1,264 |
|
|
how to recover my ti4200 bios after a flash failure? by
Christophe de Rességuier
Hi,
I used nvflash to flash the bios of ti4200 and everything was fine until i
reboot...
black screen (the monitor is ON and not in power saving mode...), no post
beep, and no boot...
then i plugged a pci video card and i tried to flash my agp card (chaintech
a-gt20), but nvflash displays an error...
|
|
0 |
1,115 |
|
|
how to recover my ti4200 bios after a flash failure? by
Christophe de Rességuier
Hi,
I used nvflash to flash the bios of ti4200 and everything was fine until i
reboot...
black screen (the monitor is ON and not in power saving mode...), no post
beep, and no boot...
then i plugged a pci video card and i tried to flash my agp card (chaintech
a-gt20), but nvflash displays an error...
|
|
0 |
1,155 |
|
|
HP Vectra VLi8 Overclock by
Justin
Does the HP Vectra VLi8 motherboard allow overclocking?? I've heard
somewhere that the HP Vectra motherboard is a BX440 derivative. Does
that motherboard allow overclocking??
I have a Pentium III 450MHz and I want to overclock it to 500MHz or
550MHz. I've read the specs for the Vectra on hp's site...
|
July 17th 03 09:53 PM
by Justin
|
0 |
833 |
|
|
DavidHW68 spam by
Phil Weldon
To bad this mathematical whizz can't count.
|
|
0 |
380 |
|
|
overclocking info needed... by
[email protected]
I've just bought and built a new pc consisting of:
Asus A7N6X Deluxe m/b
AMD Athlon 2500 Barton cpu with AMD fan and heatsink
Antec case and 340w psu
512Mb Crucial pc2700 DDR ram (2 x 256Mb)
Maxtor Diamond max 120Gb SATA h/d
ATI Radeon 9600 Pro AGP card 128mb
Windoze XP os
|
July 17th 03 08:21 PM
by Lee
|
1 |
947 |
|
|
Overclocking Celeron 1.1 GHz by
Colin Cogle
Any ideas on how to overclock a 1.1 GHz Celeron processor? My warranty is
expired and I'm looking for a free (or at least cheap) performance boost. I
can't find anything on my exact processor speed (though I've seen info for
1.0 and 1.2 GHz Celeron).
I don't know my FSB speed, but I think it's...
|
|
7 |
909 |
|
|
HELP!!! Need diagram of pins for Celeron II by
~misfit~
Can anyone tell me where to find a diagram of what each of the pins do for a
celeron coppermine? I've searched the intel site and can't find it. I have a
CPU with a pin broken off and need to know if it's important.
Quite urgent.
TIA.
--
~misfit~
|
|
2 |
744 |
|
|
Delta Focussed Flow Fans - EHE SHE?? by
Wayne Youngman
Hi,
looking at the Delta 60mm Focussed Flow Fans, but I'm not sure what the
difference is between EHE and SHE?
Thanks,
Wayne ][
|
|
2 |
816 |
|
|
Arctic Silver test by
Forrest
I helped a friend build a computer today. He bought a tube of Arctic Silver
III and had a lot left over .. gave it to me. A month ago or so I bought and
installed a Zalmans 7000 cu. I didn't have any heat issues, just wanted to
quiet things down. I love it .. it's on my P4 2.4 gig. and runs nice...
( 1 2 3 ... Last Page)
|
|
34 |
2,154 |
|
|
|
|
4 |
656 |
|
|
Worth the extra money for faster timing? by
SunTsu
Hello,
I have:
Intel D865PERLK
Intel 3.0 GHz 800MHz FSB
I just bought some memory, but I am thinking maybe I should return it and
save some money. Basically, my choices are (from the cheapest place where I
live):
2 x 512 Megs of Kingston Value RAM CAS 3 at $135 per stick = $270 for 1 Gig
|
|
1 |
1,025 |
|
|
probs with win xp and sata hd by
P Gagg
Calling all you tech heads...
I've just built a new pc, but cannot get windoze xp home to install. It
tries to install from the cd, but after loading all its drivers, it
keeps telling me that there is no hard disk and it cannot continue?
The system is as follows:
AMD Athlon 2500 (barton)...
|
July 16th 03 08:05 PM
by sticks
|
1 |
1,275 |