My xp1700 system used to crash a lot. No rhyme, no reason. I clocked down to xp1500 and it's been working fine. My guess is that my cpu's getting worn out. Fact?

Want to use an X2 in my next system. But only whenthe prices come DOWN. I know it has two cpus. But i onyl want to pay for oneof them :) Thanks for any feedback.

I am building an AMD64 4000+ and NVIDIA, 6800GT which I know requires external power source form PSU, do you think a 350watt PSU could withstand that CPU, GPU, HDD and CD RW. I have heard a good one should be able to, but then I have also heard going for a 500 watt would be a better option any...

My last computer was built 6 monthes ago and everything has changed since then. I am buying an Athlon 64 3500+ chip and I have to run an AGP 8X Mobo because i work with CAD and it requires a very special and expensive video card that I had just bought. The recommended MOBO for this application...

Totally and completely legitimate $$$$ Read this and you will make tons of money guaranteed! NETWORK TOGETHER AND MAKE MONEY USING PAYPAL Dear Friend, These are not scams. And no one is forcing you to do it. It is providing a service to you if you wish to participate...adding you to a list. ...

Totally and completely legitimate $$$$ Read this and you will make tons of money guaranteed! NETWORK TOGETHER AND MAKE MONEY USING PAYPAL Dear Friend, These are not scams. And no one is forcing you to do it. It is providing a service to you if you wish to participate...adding you to a list. ...

Hi folks! I am not overclocking anything. I just saw that you are talking about CAS latency (via Google), and saw that you know things, so maybe you could help me with a thing I am confused with. I have FIC AU13 mbo. On it I have two sticks of Xerox 3-4-4-8 (on 200Mhz), 256Mb (on DIMM2 & 3), and on...

I have a Spire WhisperRock IV on my XP 3200, which I purchased because it was low-noise. Unfortunately I did not think that this would present a real thermal issue, but the system has been shutting down from the heat. It's an aluminum heatsink with a copper disc contact and an 80mm 2900 RPM fan....

"Jon D" wrote in message ... I am running a Duron Applebred 1800 in a Via 266 mobo by Syntax with 768 KB of 133 SD-RAM. CPU temp under load = 44 degrees C. Phoenix BIOS. My crappy mobo doesn't permit very many setting. (EG can't set...

On Sun, 24 Jul 2005 17:26:42 +0100, Jon D wrote: I am running a Duron Applebred 1800 in a Via 266 mobo by Syntax with 768 KB of 133 SD-RAM. CPU temp under load = 44 degrees C. Phoenix BIOS. My crappy mobo doesn't permit very many setting. (EG can't set cpu multiplier.) Doesn't...

Forget about overclocking with what you have... also, reset the memory to default settings! -- All problems have a simple solution! The more complex the solution, the more ludicrous the analogy! "Jon D" wrote in message ... I am running...

Jon D jon_d nomail.com wrote: I am running a Duron Applebred 1800 in a Via 266 mobo by Syntax with 768 KB of 133 SD-RAM. CPU temp under load = 44 degrees C. Phoenix BIOS. My crappy mobo doesn't permit very many setting. (EG can't set cpu multiplier.) ---------

Can someone please tell me what is the normal operating temperature for an Athlon XP 2800+ Barton (non-overclocked)? (Just trying to get a good baseline here) How about an Athlon XP 1700+ ?

il mio hardwa AMD ATHLON 2600+ BARTON + ARTIC COOLER MOTHERBOARD ASROCK K7S8X 1GB DDR 400 PC3200 TWINMOS HARD DISK 30 GB HARD DISK 250 GB SONY DVD-RW ASUS DVD GEFORCE 5200

I'm currently moddifying an old AMD T 1 GHz, while I'm at it I might as well overclock my precious. But when I set the dipswitches to multiplier 12x, nothing happens! In fact, both during the startup sequence and according to different pieces of software, the multiplier is still 10x. I'm definitely...

Am in the UK looking to get a AMD Athlon Throughbred-B processor. Prefereably new (if still possible) else reliable secondhand. Am looking for one of these: 2200+ AXDA2200DUV3C 2100+ AXDA2100DUT3C (plus step B) 2000+ AXDA2000DUT3C (plus step B) Maybe even: 1900+ AXDA1900DUT3C

It has an amd athlon xp1600, looking to upgrade. thanks.

SATA 2 Native Command Cueing and Multi Tasking. Alot better ??? I know the speed of SATA 2 is 300mbs. Not to fussed about that as we are not even using the ATA 100 full bandwitdth yet :) But i am interested on what effects NCQ has on responsivness of your computer system. Will it make it much...

Not sure i would want to 133fsb vs 200fsb. Just have a stick 1 gig of pc2100 and iam building a media pc and though i might use it in it. Then againmight just buy some cheapish 3200 ram. Its cheap these days. Thanks for any info.

Hello I am planning an upgrade on my system the current config is as follows: Soltek SL-75FRN-RL AMD 2500+ overclocked to 3200+ (200fsb) 768mb pc3200 TwinMOS 3x256mb sticks running dual channel. ATI 9800 Pro SATA 250gb seagate 7800.2 Enermax 400w PSU I am going to keep the ATI 9800 Pro and hard...