|
|
Proliant 2000:Missing config-File on setup diskettes by
Ralph-Guenter Bruns
Some time ago I bought a defunct compaq server (what I believe is a
Proliant 2000) for scrap price. Initially I only wanted to use the case
but then I noticed only the graphics card was broken. Replaced it by the
same model whic I had as a spare part an the system started properly.
Then I thought...
( 1 2)
|
|
11 |
709 |
|
|
freeBSD: Install hangs at /stand/sysinstall running as init on vty0 by
VinceV
Has anyone successfully installed freeBSD on a proliant 2500?
I have tried several releases of the OS with the same result. Thinks
appear to work correctly until it displays /stand/sysinstall running
as init on vty0 and then the install hangs.
The sysinstall application is supposed to launch at...
( 1 2)
|
|
10 |
1,016 |
|
|
Pathetic Performance of RA4x000 RAID Arrays by
Will
I've been using RA4x000 as a cheap disk source for applications that do not
require very high disk performance. I had assumed the RA4x000 RAID
systems would bottleneck on the 1 Gbit fibre channel interface, which is far
more throughput than I could get out even six drives in a RAID 0 array....
( 1 2)
|
March 31st 07 03:27 AM
by Will
|
10 |
1,115 |
|
|
Fan speed on ProLiant 3000 Server by
Fpbear II
The fan speed on the ProLiant 3000 is always running at the same speed (very
loud). I thought this was capable of variable speed, so it slows down when
it's cold. I have the support pack installed. Is there some configuration
in one of the management agents to set the fans to variable speed?
( 1 2)
|
|
10 |
1,189 |
|
|
proliant 3000 by
franklin
I recently bought a Proliant 3000 dual processor PIII 500 with 1 GB
memory.
The server has:
- Sony 4/8 internal SCSI tapedrive
- DELL DLT PowerVault 110C 40/80 SCSI Tape Drive.
- SMART-2DH array controller (memory unknown, with daughterboard)
- SMART-2SL
- Storage Ssystem U1 en 12
- SCSI harddrives...
( 1 2)
|
|
10 |
722 |
|
|
compatibility SA5302 in a PL6400R and SS-5.5 crash by
Phil
LC,
Regards your post and my reply on the compatibility of SA5302 in a
PL6400R.
I did run across a HP matrix that listed that 5300 controller as
compatible with your 6400 server.
In regard to me having the same problem with 5.5 errors, I installed
two new motherboards in DL580's and set them up...
( 1 2)
|
|
10 |
671 |
|
|
SW3322 by
Robert Bates
Does anyone have a pfd of the manual for the SW3322 switch and the
configuration app? I have one of the switches that I haven't used for some
time and have forgotten its IP. In the redesign of the Compaq site, the
SW3322 has pretty much disappeared.
( 1 2)
|
|
10 |
561 |
|
|
HP Using ELPIDA Memory in DL380 G4? by
Will
Is HP using memory from a Japanese company named ELPIDA in the DL380 G4?
I am showing assembly 345113-851 Spare 413385-001 as the 1GB DIMM that is
part of the 2 GB memory kit. I ordered this from the vendor and it does
have the HP label, but I have never seen the ELPIDA label on any other...
( 1 2)
|
|
10 |
1,249 |
|
|
Proliant 8500 by
Robert Bates
I've been drooling over the 8500s with eight way xeon 700s that are starting
to pop up on ebay. Any experience with running these for MySQL servers with
Linux?
( 1 2)
|
|
10 |
696 |
|
|
proliant 3000 - loud by
coffi
Hi,
i use my proliant 3000 very well, but the machine is so loud. Is there a
way to control the fans?
Best Regards
coffi
( 1 2)
|
|
10 |
300 |
|
|
|
May 5th 04 05:14 AM
by Larry
|
10 |
721 |
|
|
New install on 1600 error 45 by
Adam Raff
Hi
I hope someone can help me. I have a Compaq Prolient 1600. I updated the
Bios, the Firmware on the Raid controller (3200) and the Disks. All are now
up to Compaq speck.
I insert the Smart Start CD 4.90 and let it go do it's thing. I choose the
self configure since I do not have a floppy...
( 1 2)
|
|
10 |
627 |
|
|
Compaq 4.3Gb caddies - can they take larger capacity drives? by
Jason Arthurs
I am assuming the caddies themselves impose no restrictions on the
capacity of the drive. So my next question is, that assuming a Compaq
2SL RAID card, what is the largest capacity drive I can squeeze into a
standard Compaq 4.3Gb caddy and still have the array work?
The 4.3Gb drives in caddies...
|
|
9 |
343 |
|
|
Compaq communications cable 295245-001 by
Larry
I'm trying to locate one Compaq Communications cable Part Number: 295245-001
(used to communicate between the Compaq 6500 series Server and a Compaq UPS)
Do you happen to have one laying around?
Thanks!
(¯`·._.· £ãrrÿ ·._.·´¯)
|
February 22nd 05 04:47 PM
by MikeR
|
9 |
513 |
|
|
Fedora 5 ACPI by
[email protected]
Hi
I've put FC5 on an old ML370 and it won't control the fans.
I have the Software Maintenance Packs up to v7.4 with the Linux
Proliant
Support Pack, but it won't install in Fedora - says it only supports
RHEL3&4
I think I can fiddle it, but...
Has anyone done this before?
|
|
9 |
812 |
|
|
Proliant 5500 P12 PII unit CPU question by
Tim
Hello,
I have a Compaq Proliant 5500 which came from the factory with (4) 450Mhz
PII XEON processors.
I recently purchased (4) 700Mhz PIII Xeon's and wanted to see if they would
work in this machine. I know the 450's and 700's use the same 2.8v
electrical rating so I am assuming the VRM's are ok....
|
|
9 |
349 |
|
|
Compaq UE storage and larger drives by
Phil
On the older Compaq UE storage units, will they work changing out the drives
to something larger that the 18.2, like 36 Gig drives. Is there a limit on
the internal UE card. Will the larger drives work with the 3200 array cards?
Many thanks,
Phil
|
|
9 |
419 |
|
|
Connecting an external tape drive to DL380 G1 by
TPO
Hi all,
I'm trying to build an old, second hand, G1 DL380 (2x P3/1000).
Everything works fine except when I try to connect an external tape
drive (HP Surestore DAT 12/24) to the SCSI connector on the mainboard.
With the SCSI cable in place (regardless of whether the other end is
actualy...
|
November 21st 05 11:45 AM
by TPO
|
9 |
462 |
|
|
Compq 6500 server set-up...aka pls help me, my new toy doesn't work by
the lurker behind the cornrows
Like many others here, I thought I knew enough about computers to play with
a server. That's just an overgrown PC, right? I had an opportunity to get
my hands on a couple of Compaq 6500's. Well, 4 actually. After d/l
smartstart 5.50 iso from Compaq and burning to a cd from both Nero and
Roxio,...
|
|
9 |
239 |
|
|
Temperature monitoring my new Proliant 6400R in Linux... by
Rick F.
Hi all.. A little while ago, I was looking at the array-utils package that is
available to monitor the various SmartArray controllers out there and
provide various status's on the current state of the controller(s) in your
server. So, that got me to wondering if the person that wrote that...
|
|
9 |
264 |