I have an Asus A7N8X Deluxe with 2 x 256Mb crucial DDR ram chips (total 512Mb ram). How do I know if the dual channel bit is working? I have installed the 2 chips in the first and third memory slots, not next to each other in the first and second slots, is this correct? Ta...

Does the HP Vectra VLi8 motherboard allow overclocking?? I've heard somewhere that the HP Vectra motherboard is a BX440 derivative. Does that motherboard allow overclocking?? I have a Pentium III 450MHz and I want to overclock it to 500MHz or 550MHz. I've read the specs for the Vectra on hp's site...

Greetz all, Just trying to get my head around some memory theory. I am led to believe that memory can run faster if it has a lower Cas, and that if you have slower memory you have to *relax* the Cas if you intend to push it above its rated speed. . . . . . . . .so what I am wondering now is if...

i have a jetway motherboard v400dbl that i have installed with an amd 2400+ xp the bios recognises it as 2400 but it only runs at 2002 in xp is this all i should expect or can i up this by overclocking etc

Is this still available? Haven't been able to find it. And, what kind of performance improvement would you expect over CL3? . I've got the FSB at 146mhz, Athlon XP 2000 Thanks Thanks

Hi, I read here about this cool little app that will run from a floppy. I downloaded it and made the boot floppy and rebooted. Program works fine and reported no errors. Thing is its been running for 18 hours and I'm not sure when its gong to end?. Is it the case that if its runs for several...

********************************************************* * This article is posted by an unregistered version of: * Newsgroup AutoPoster PRO version 1.3.7 ********************************************************* We know it sounds TOO good to BE true, but it’s REAL! Our International...

So could you explain to me this: if I set the FSB to 166Mhz, the option is there to put the RAM at 333Mhz (its default setting). But at this setting the computer will rarely get past POST. So what could be causing this problem? WHat if I got DDR3100 RAM, which runs at 400Mhz, and I let the...

Ok my specs: P4 3.06 Ghz, FSB = 133Mhz, water cooled Gigabyte SinXP1394 motherboard 2 x DDR 2700 512mb RAM sticks, FSB = 333Mhz extra cooling fan I have decided to look into slightly faster memory. http://www.tekheads.co.uk/site/browseCategory.do?categoryId=77 shows a lot of Corsair memory for...

S.Heenan wrote: Big time trashed. Too little CPU voltage will do the same thing. 25mV can make all the difference in the world. Hi, I never heard that to little CPU vcore can scramble a hard disk, much the same as running the PCI to far out of spec used to be (especially Maxtors). When it did...

Anyone successfully running an ATI All-In-Wonder Radeon 7500 or the newer All-In-Wonder Radeon 9000 on a O/C'd BX chipset system running at 133MHz FSB with the 2X AGP slot therefore running at 89MHz? Thx, RR

I was running an Infineon 256mb PC2700 module in my system and was able to run my P4M/266a chipset board at 2.7Ghz using a 2.4b cpu. I bought another module with the exact same specs but a different manufacturer. (Xerox) Now I can't get over 2.5 without the system rebooting itself. Could someone...

********************************************************* * This article is posted by an unregistered version of: * Newsgroup AutoPoster PRO version 1.3.7 ********************************************************* We know it sounds TOO good to BE true, but it’s REAL! Our International...

My Swiftech pump is leaking. I thought I read somewhere that it was also a submersible pump. Can I submerse it in a res to avoid leak issues? Will that affect my pressure if I do? Thanks.

I've notice ( http://www.asus.com/products/mb/fsb800.htm ) on the ASUS site they say that you can upgrade to 800MHz FSB. Im running the 1005 bios already. They tell you to change the CPU external frequency to 200MHz and to make sure there is unlock on frequency multiple processor but the...

I've searched the web some on the topic of dual-channel DDR and I haven't found a concise description of what it is and how it works, or an answer to the practical question of how much good it is. I guess it is a motherboard feature and you can use the same RAM sticks in either type of mobo. Is...

Hi All Just let me know, what you think the best overclocking board for a PG30 800FSB is ? bye

Hi, I've got a P4PE with 2.4b , 2x256Mb PC333 and its all humming along nicely thanks :o) However I've noticed on the ASUS site they say that you can upgrade to 800MHz FSB. Im running the 1005 bios already. They tell you to change the processor multiplier in the bios......... its locked, just...

Okay, since it seems that SOME of you don't even want to really give me the time of the day in regards to overclocking my Dual P3 system, I went back to cleaning my room and sorting through the junk pile. Well upong cleaning through it I found some spare motherboards, one of which is a Asus...

I'm new to building systems and overclocking. I have a 2.4B clocked to 2.75Ghz right now. It's running at around 50*C. Is that dangerously high? I have two 80mm case fans, and I'm using the stock Intel heatsink on the cpu. My room is always about 80*F, because my roommates are too cheap to keep...