Does anyone have a link for the stock Intel P4 fan mod that puts the fan on high instead of variable? Thanks, Pete

Hi, I am looking for a heatsink for an AMD socket AM2 that is as quiet as possible (not a watercooler) Up to 12cm high for my new HTPC under construction. I found: - Scythe Mini Ninja CPU Cooler - Arctic Cooling Freezer 64 Can anyone advise me on a good heatsink? Thanks

What type of plastic tubing might be suitable for use in a water cooled computer? The highest priority is to prevent leaks. So tubing that can't possibly split apart, can withstand heat, can be both force-fit onto connectors and crimped on without damage. (or glued on with glue that's made for this...

I overclocked my radeon to 321/363Mhz and it worked fine (no artefacts in games) up till one day when I turned my pc on and saw black stripes going from top to bottom of the screen. I rebooted the machine and everything is fine again. I went back to the default values again in fear of...

wrote: But to get the best out of it I need to increase the bus speed (now running very stable on 66.6 x 3) for I am turning this system into a LAN-server with 4x 20GB IBM hard drives -- but without increasing the bus speed it kanda slows down pretty fast. Doubtful...

I live in Toronto Canada, and I have some serious computer problems :( First I will explain why I am angry .. then I will explain the problems I am having with my computer lol I tried installing Macromedia Dreamweaver...Fireworks and Microsoft Office 2003. Each time I got an error saying that I...

I'm about to buy a E8600 and was wondering if there were certain model to look out for, I'm far from an expert on this one but there is stepping and sometimes things like SLB9L, do these series mean anything to me the end user? Jim

Hey, I'm just OCing and stressing a new build for a mate. Asus P5K-Deluxe WiFi-AP with a G0 Q6600 topped with a Thermaltake Big Typhoon. The case isn't the best in the world for ventilation (Gigabyte 3D Aurora) but it's also not the worst. 1 x 120mm in the front, 2 x 120mm in the back as well...

|Hi: What is the maximum physically-possible clock rate of a 1-bit-per-cycle, single-core, purely-serial processor? Thank a bunch, Green Xenon

ok whats the deal he bios stats system temp: 46c/114f cpu surface temp: 38c/100f cpu core temp: 42c/107f hardware doctor system 46 cpu 38.00 - 38.50

Subject header says it all. . . I use a 40mm Fan, its part of the retail FC-PGA PIII heatsink running a 550e @ 733Mhz - Load 41c - I'm in the UK. . .

I've just started playing with a Celeron Mendicino 500MHz (7.5x) and have it on an 83MHz FSB at 2.4vcore. I'm installing 98SE on it so haven't tested it with Prime95 yet. I was just wondering, how fast are these CPUs known to go. I have an AMD XP2500+ Barton HSF on it, one of the copper-bottom...

Kristopher wrote: Does anyone know of a simple program which tells the CPU temperature in Windows XP. thanks, Kristopher

Last thread, I've now written off the Upgradware 370GU adapter for my Intel D815EEA board. (Though it works great in my Compaq.) I have taken the easy way out. As opposed to soldering, ala Lunchbox, I ordered the LinLin adapter, which has a voltage range of 1.3 to 1.05, jumper selectable. Since...

One of my venerable P2B/Tualatin systems is misbehaving, and I'm at a bit of a loss as to what to try next. It's a P2B-S with a P3-S 1.4 on a Slot-T adapter and 512MB of Micron PC133. Processor is running stock (1.4Ghz), mainboard overclocked to 133Mhz FSB, stock PCI clock. I was clocking it at...

Depends on the CPU. Some AMDs with "Power Now" use voltage reduction to reduce power consumption for mobile use. While the CPU is in reduced power mode it also clocks down (underclocks). Check out your CPU speed with the reduced voltage, you CPU clock could have dropped with the voltage drop. ...

Hi, just trying to get some *confirmation* about this tech. I understand that it is meant to be a bonus feature of the Canterwood chipset that somehow makes the memory work faster. What I wont to know now is whether this feature only works when you run your FSB and memory bus *synchronously*...

Uncle Vinnie wrote: Thanks Dave... the odd thing is that I have the problems when I have 2 of the 133's! If I have a 256-133 in the first slot and a 128-100 in the 2nd, all works fine! I don't like to mix but this configuration is working... I was thinking of asking the company to replace...

hi i have a p4p800 deluxe rev 1.02 (BIOS 1015) with a pentium 2.4C CPU with 2x256MB TwinMos PC3200 DDR ram and a 360 W PSU whenever i try to set the Bios´ AI overclocking feature to any other value than standard(10%, 20%, 30 %), the board cannot boot and i get the "overclocking failed" message. i...

"Fred Harnum" wrote in message ... I'm looking for a good CPU heatsink and fan for a P4 Socket 478 2.0a @ 2.8a Whats good? And where do i get one? Thanks