hi all, i purchased a gateway 310s about a years ago and was wondering if there is any way of overclocking them. the computer has an intel thrasher mother board, celeron 28. ghz processor. there looks to be no way of changing the fsb setting in the intel bios. am i correct that they cannot be...

Does it detectible difference to overclock a Pent3 in my Gateway with 380meg ram? If so how much is practicle and at what speed ?? I have a Pent2 in another pc that is running steady as rock at 400. thanks don ward -- ---

All the info I read about my vid card says it has a core clock speed of 475Mhz but RivaTuner is telling me I currently have a speed of 300Mhz. Is the 475Mhz figure a maximum quoted or should it be a normal speed. Could I be getting a reduced speed because Im at AGP 4x or could it be because I have...

Hi, I just bought the Club3d Geforce fx5700LE. but the 3dmark03 score is as low as 1701! Some tests even reach 1 fps! is that normal??

Has anyone tried to modify voltage on that chip ( RT9204 ) - Geforce3 Gainward powerpack ?

Has anyone ever overclocked a Geforce4 Ti4400? I've overclocked mine and I just wanted to share some info on Mhz and performances and temperature etc...

Most case manufacturers recommend that the fan by the CPU and the front, lower fan blow inward. Which way do the PS supply fans blow? It seems to me that you would want all the fans to blow outward, blowing hot air out and letting cool air in through various openings.

Just to make this information easier to find in a search of the newsgroup - if anyone is really doing that before asking a question B^) _____ A whole lot of people who have no idea of how to overclock have been successful in overclocking. If the motherboard is 'overclocking friendly', an Intel...

Back in the day that I had a Celeron300A system, I overclocked to run at 566mhz simply by changing the FSB setting. (I believe it was from 66 to 100 if I recall correctly.....) Besides increasing the CPU voltage slightly, the only other adjustment was some kind of setting for AGP ratio to keep...

Hi, I have a P-4 with hyperthreading and an MSI motherboard that supports 800Mhz FSB I have two Nanya 256Mb RAM sticks that are PC3200 with cas 3-3-3-8 according to CPU-Z and the BIOS The FSB is at 200Mhz (effective 800Mhz) according to CPUZ and the BIOS Unfortunately I can’t get the Nanya RAM...

http://www.hardwaresecrets.com/article/534/1 Dissection and testing of a generic 500W PSU. It turned out to be a 250W PSU with missing protection circuits and very high electrical noise. Good reason not to use those for overclocking, or even for anything. --- Ed Light

Follow the directions below and in two weeks you'll have up to $20000.00 in your PayPal account. There is a very high rate of participation in the program because of its low investment and high rate of return. Just $5.00 to one person! THAT'S ALL !!! If you are a skeptic and don't think the...

Take advantage of a great deal

Hey all i have bumped my multiplier up to 12x to run at 2400mhz and was wondering what fsb and multiplier combo would be a better performance gain if any than just the multiplier as ive done. i have also bumped vcore to 1.7v. and running pc2700. is there more gain to be had in dropping multiplier...

Not really an overclocking issue, but this group seemed most likely to have the right answer. I just got a Shuttle MN31N Mainboard that supports 333 FSB and an Athlon Barton 2500+ that runs on the 333 FSB. Shuttle website confirms that the board supports the 2500 Barton. When booting the screen...

Hi, A charity that I help has been given two boxes: The first is a nice full tower case containing a PL6X-ATX mobo with 128MBytes memory and a pentium ii 233 MHz Slot 1 processor,80522px233512. The second is a very non-standard box and small integrated mobo with no expansion slots with 128...

Hey, I bought myself a Aopen Aeolus Geforce FX 5900XT 128 DDR ... nice board with a basic setup @ 300/700 (2D) and 390/700 (3D). It has a big cooling fan on the GPU, reaching over the memory blocks (but not quite all the way), so I'm afraid the mem isn't refreshed all that much. pic:...

With the new PC that I'm gonna have on Monday, I will have a 7950 GT in it. I was reading about the specs for it and I can't find much difference between it and the 7900 GTX. Technically speaking...if I just raise the clock speed of the 7950 GT can I get it to essentially be a 7900 GTX or am I...

Anyone using these? I heard the bios wasn't up to speed yet? thx bob

I have an icore 7 with 6 cores running on a GA-X58A-UD3R(rev. 2.0)Mobo. I have had a recurring problem that after disabling hyperthreading in the CMOS, in the task manager, I find that the mode is switching from no HT to HT without a system reboot. How can this be possible. Anyone else...