Can anybody tell me if the following configuration for an Abit IC7G motherboard will work with a Pentium 4E (Prescott) processor and how far it might be able to over clock. Does the Pentium 4E come with a heat sink or do you have to buy one separately ? I've heard there are issues with the IC7G...

I’m planning on over-clocking an Intel PD 950 3.4GHz Dual Core processor, on an Abit AW8 motherboard. I’d be curious to know what the experienced over-clocker thinks might be the envelope for this particular combo; but more specifically, how much additional voltage I’ll need to get it to around 4...

Check out these 2 screen captures, from the same instance of CPU-Z: 14: http://tinyurl.com/fbafb 16: http://tinyurl.com/eq2lv The FSB keeps vacillating between 14 and 16 and the CPU speed gets recomputed every time. The BIOS clearly indicates a P4 3.2 w/HT and Soft Sandra indicates

When powering off the machine, I notice the CPU temperature shoots up as much as 10c and then goes down slowly. Such rapid thermal expansion could not be good for the life of the processor. Something that would provide power to the CPU fan for a minute of two after the machine is shut down would...

....I'm the prettiest bell of them all: http://init-sce.tripod.com/newbuild/pretty.htm ....and I'm the ugliest duckling of all: http://init-sce.tripod.com/newbuild/ugly.htm The pretty one is: Abit AW8

I just bought a stick of their Hyper-X (KHX6400D2LL/1G) super dooper memory. It's advertised as: "1GB 800MHz DDR2 Non-ECC Low-Latency CL4 (4-4-4-12) DIMM". However, when you read the data sheet, it says: "This module has been tested to run at DDR2 800MHz at low latency timing of 4-4-4-12 at...

Hi there, I run a Pentium 3.2 800Hz and use 1024 Corsair DDR memory at 3200 on a CAS 2. All on an MSI 875 Neo FISR I know this is sweet but I have the chance of offloading my memory and wondered if I would get a significant performance boost by going for the same amount of memory but use PC4000 or...

Hy people I am looking for song. I think from early 90's. Voice is female and British English accent. The song goes something like "never found you, .... merry queen...". I think that it was very popular because I could hear it very offten on radio, as a kid. Do you now the name of that...

Hi. I'm interested in overclocking my quad core Q6600. Any usefull tips or links would be greately appreciated. System sepc: Intel quad core Q6600 Asus striker extreme OCZ 4GB gold 2x2GB DDR2 800 GeForce 8800 GTS nice Asus cooler keeping my idle temps to around 30C Thanks. AJJ...

The Gold edition of the Gamers' Extreme XTC DDRAM (1GB DIMMs) has recommended timings of 2 - 3 - 3 - 8 at DDR400 speeds, 3 - 4 - 3 - 8 at DDR500 speeds. The Platinum edition has recommended timings of 2 - 3 - 2 - 5 at DDR400 speeds, 3 - 3 - 3 - 8 at DDR500 speeds. Obviously, the Platinum edition...

I can't seem to get the mainboard to recognize the drives.

Hi Does anybody know any site where I can learn the basics of overclocking.The difference by changin the multiplier and rise the fsb as an exemple.In short terms,how it works. regards al

Hi people, I would like a bit of advice if poss. My system is as follows. Win XP Pro SP1 AMD XP3000+ (not overclocked yet) Chaintech 7NJL1 (Nforce2-Ultra 400) Mobo 256mb Twinmos 333 DDR 512mb Crucial 333 DDR ATI Radeon 9700pro card, fitted with Arctic AGP Cooler/Silencer 30gb Maxtor 7200rpm HDD

Hi All, Could someone post super pi mod 1.4. A group is comparing results and they've chosen mod 1.4 to use as bm. I've got 1.5, I don't think there's a big difference, but they want us to post a screen cap to verify. I suppose I could get creative with PS pro, but that wouldn't be honest!!!

Tod, When you use the "canned" overclock settings in your P5p800se's BIOS, youll see that Vcore reamins stock. only the frequencies are modded. If your cpu supportsspeed step, I suggest disabling it for your oc. with my p4, any BIOS overclocks that post are rock stable, and they run at stock...

In my bios memory options page, there is RDSAIT auto or manual. Setting to manual reveals a value field which must be entered in Hex. I've searched everywhere and found nothing referring to RDSAIT. Dealing with Award/Phoenix/eSupport is a pain. Any overclockers know anything about this????

Hello all, What is a good resource for a newbie learning to over clock. Also recommendations/ comparisons of AC vs. water vs. air cooling. thinking baotu AMD Fx57 OCing. Azm

Hello my name is Alan I have a motherbord Asrock with I845D chipset Made for a 400Mhs P4it's suppose to work fine with 533 Mhs Intel proce by pushing de frequence of the bus. this motherbord work with memory DDR 266 & 200 Would it be a problème if I use DDR 333 With 533 Mhz Intel

im quite new to overclocking i got my celeron 2.2 system i tried to clock it at 4.4 ghz it booted and started loading windows and then froze it got to 90 odd celsius in about 1 minutes... now it wont run stable at even stock speeds? did i **** my celeron up?

hi just got my new system... its not too great but it was cheap... its Athlon XP 2800+ Thoroubread Rev B Jetway N2PAP400 Ultra motherboard ATI Radeon 9600 Pro graphics card 512mb ADATA Ram, DDR400