yaesu wrote: Any settings to overclock my setup much appreciated.I have at moment set CPU to Manual and mulitiplier to 12X at 166/333. memory at 333mhz. core at 1.65v Asus A7V8X-X AMD 2500+ Barton 512MB PC2700 Run CPU-Z and tell us if the speed has actually changed (form 11x). Your...

I was directed here from Microsoft.flight-sim. I am not really a computer expert, but I usually get the message with some help. I have a AMD XP1900+ cpu on a Asus A7M266 mother board. The video card is a Asus V8200 GeForce3 Ti 200. Is it possible to up the speed (overclock) the performance? Is...

Is there any tweak to get more cache memory on celeron 2.2 GHz??

Sorry for bad english. I have Gainward Ti4200 Golden sample (enhanced mode) and i have 8500 points in 3DMark01SE AMD 2400+(333fsb) 2.0GHz 512 DDR 333MHz (2x256 Dual Ch) Epox 8RDA+ 80GB Maxtor

Everything else being equal, should there be a noticeable frame rate difference in gaming between 1 gig of 2,3,3,5 memory vs. 1 gig of 3,4,4,8? Or will only benchmarks(Sanda,Aquamark,3dMark,etc) notice a difference?

For further OC, I need some special prg. to be able to read my AGP/PCI Bus speeds. AIDA,SANDRA won´t do it (anymore). It´s an Asus motherboard. G.

Intel makes 3 cpu's that are 3.0g, how can one tell if they are getting the better one for over clocking?

Has anyone heard of this program before? I currently have a Pentium 4 2.4B GHz CPU and I think its reading the information wrong OR my CPU is not real... things seem ok until I get to the Front Side Bus Frequency CPU(s) Number of CPUs 1 Code Name Northwood Specification Intel(R) Pentium(R) 4 CPU...

I'm just running a retail P4 2.4c (800) with retail fan on an Epox EP-4PCA3+, just done a small bit of tinkering in bios and come up with 3gig (FSB 250x12), would you guys say this about normal or better/worse then normal, did try 3.2 but it would not play ball :) Temp's are about 43-45 on idle,...

My PC is getting on a bit now so I thought I'd try and speed it up a bit. Spec is: Celeron 1.3ghz (Socket 370) Geforce 2 GTS 512mb of Cheap No Name 133 Ram Gigabyte 60XM7 Motherboard Running 1.52GHZ Processor @ standard voltage and Geforce GPU at 205 and Memory at 370IIRC.

I'm new oc, but I've some homework (some of the info on the web is conflicting) and still have a few questions. Trying to oc a 3.0 on a p4c800-e w/ ocz 3700 2x512 gold. stock cooling I've got the fsb to 233 which should put the mem where its good w/ lat cl2.5-4-4-8 and tried 2.5 -3-3-7. It...

Hi, I installed RivaTuner. When I go into the menu where you adjust the sliding bar to increase the clock speed, it won't move. Also the Enable low-level hardware overclocking at the top is greyed out. I added the "CooBits" entry in the registry, but that didn't help. Anybody know whats going...

I am building a new system and here are the specs u need to know: Asus P4C800-E P4 3.0GHZ 800mhz FSB My question is this MOBO supports up to pc3200 400mhz DDR SDRAM and i was wondering as i will be trying to overclock this as much as possible using AIR COOLING. I will be using a Thermalright...

I heard the other day that the AMD 2500+ now and have been coming out of the fractory locked. What I want to know is, are the locked versions still allowing 3200+ speeds by just changing the FSB to 200Mhz instead of 166Mhz. Thanks!

I just put the finishing touched on assembling my new rig. Whats next? Why overclocking of course :) I want to take benchmarks before and after I tweak the system. Can anyone recommend a good benchmarking program? A quick search of google yielded a mess :) Hopefully one of you guys can point...

Is there memory out there that can run DDR 400 at the tightest timings stably?

Spam this address as must as poss, so i can block it with spam assasin sorry if it offends anyone

Hi all I have a silly question: what should I do to overclock my CPU successfully? I know that I should raise the bus speed but how about the voltages (especially of other parts like memory, graphics card) Can anyone advise me on how to do it specifically? Eg. if I when should I raise the CPU...

Hi, First of all I'd like to say this is my first post here so please forbear with me. I have some questions regarding the following issues, since I intend to buy this mainboard with OC in mind and hope for many years of safe usage. 1) What issues have been corrected since last (i.e. preceeding)...

I recently installed a PCI card with USB 2.0 ports. However, it is running at 1.0 speed. I suspect the problem is the drivers aren't getting loaded. It came with two .sys files and a .inf file, but no setup.exe. Is there a way to install these drivers, perhaps based on the info in the .inf...