I have a Intel Pent 111 chip that is set for 550 speed and a older SOYO motherboard that has a top speed at either 650 or 660. I overclocked it at 605 and everything worked fine.Today I thought I would see if I could get 660 out of it and now the computer will not boot up. At first I could just get...

I'm almost there, I'm using Flask mpeg to test it. any ideas on settings please.. And Thanks. Dennis E Strausser Jr

I am sure I fried my Floppy controller on one system (ABIT BF6). Other BX (Abit BX6, BX133) Systems are fine at 133MHZ After OC, I saw the data from the floppies degrade over 10 minutes and now are unusable. Just replaced the caps too.

I just bought a Lian Li PC7 case which is supposed to have a removable metal caddy at the bottom to hold 5 HDDs. Instead I got a permanent 2 drive bay. Apparently the newer revisions don't have the 5 bay one anymore. Does anyone know of any places still selling the PC7 with the 5 drive bays or know...

Hello, I have assembled a PC using Soyo P4VSA with Chipt set: VIA VT8753 Apollo P4x266 (is it 266FSB??) 2 x 259Mb PC133 SDRAM simms BIOS Award Modular v6.00PG Intel Celeron 4A 2200MHz cpu and I see problems at boto time (dual boot machine):

Too bad you don't have a P4 2.4C...not so nice :) - Papa stood up, at show-n-tell, and said: i just changed from a Volcano 7 to an Aero flow 7040..and my CPU temp dropped from 51C to 37C..nice AMD XP 2100 B 154x15 = 2310 Mhz

have a celeron 1ghz (128kb cache) and a p3 733 which would be 'faster' before i tear out one and lay down the other.. 1. the celeron is running on 100fsb as opposed to the 133 for the 733 2 the celeron has 128kb/cache and the p3 256kb 3. speed kills.. but does the 1000 vs 773 make up for the...

I tried to overclock my P4 2.8GHz by changing the FSB. I noticed that the frequency for AGP/PCI and memory will change together with the FSB. I am unable to just change the FSB only. How do I lock the AGP/PCI frequency so that only the FSB is changed? If not, i can't do overclocking.

hi there all I have an external cdrw from freecom (firewire). I would like to replace the drive inside with a dvd writer or perhaps a HD. Is it possible? would winXP recognise the drive or is it dependent on some bios in the box? cheers michel

i have a P4 2.4C GHz proc. i have TWO 120mm fans also a CPU fan, of course. i wanna overclock 25% to 3.0 GHz. should i try? or will it get too hot? or is 25% tooooo much? lol. TIA for all help.

Tried to vid pin mod a new 2.4Ghz P4 and it still shows default core voltage of 1.525v. Abit TH7II-Raid P4 2.4Ghz SL6SH 512Meg Rambus

Yeah might try the firmware see how it gos, as a burner its pretty slow by todays standards for 199.95 i can get one that 4 times faster and will burn anything (: On Wed, 9 Jul 2003 07:07:45 -0400, "billy_bat" wrote: I checked out

"Dave" wrote in message ... in any computer what are ALL the things you can overclock? and how would you manage to do so? TIA. The most common component to OC is obviously the CPU, and there's two ways to go...

Just wondering what peoples experiences are overclocking this card, and obtained rock solid settings. smithy

"Alfi" wrote in message ... I have a Samsung SyncMaster 957DF 19inch monitor and XP. It lists the refresh rates upto 85hz. I just asked it to show me all rates and selected 150hz. The desktop appeared...

Hello all, I am planning my next upgrade to be a P4 2.4C and ABIT IS7. Of course the first thing I am going to do is overclock the sh@# out of it and I am looking at different types of memory. Does anyone here have any experience with this...

how do i do it?

"Lane Lewis" intrigued me with a story ... Not recommended for a server you could get a couple of 1.4 gigs but at 400 USD it might be better to save for a Xeon. Server ? Huh? Nope that's just my regular machine..

I've overclocked a couple of Abit machines before but I'm not sure where to start with this one that I've just put together. I'm hoping for 3.0ghz but I ran out of money for the graphics card and I hope that won't kill my chances. Below is what I'm working with. 1. Abit IC7-G MB 2. 2.4c pent 4...

Hi folks, Just a quick question... I have a real good heatsink & fan combo from my Socket A days. Now have an Asus P4P800 with 478 Intel CPU socket. Would like to know if anyone has a link to a device that would allow me to use this big block of copper on my current CPU. If I remember correctly...