|
|
Athlon XP on Socket 754? by
Yousuf Khan
Looks like AMD getting geared up to make its Socket 754 its primary
platform, for both 32-bit and 64-bit chips.
http://www.xbitlabs.com/news/cpu/display/20030821060723.html
They're talking about a version of the Athlon XP (i.e. 32-bit Athlon)
which fits on the Socket 754, codenamed Paris and...
|
|
7 |
740 |
|
|
D865PERL and slow dual-channel memory by
Beemer Biker
I recently put together two systems. The first was an ASUS A7N8X DLX and I
bought a matched pair of corsair xms DDR-400 memory. That worked o.k. and I
ordered the same type of memory for the 865PERL mombo. I cannot seem to get
it to be recognized as anything other than DDR-266. With a 2.4...
|
|
2 |
366 |
|
|
Access VGA ports through S/W?????? by
Yousuf Khan
(Sonu) wrote in message ...
Hi all,
I asm trying to access the video port (i.e conventional VGA port)
which is connected to the monitor via a DSUB line.
Okay there are various issues here that you haven't considered...
|
|
2 |
584 |
|
|
Different numerical behaviour on i86 vs other CPUs by
Matthieu Dazy
Hi,
I recently came across a problem with computations involving float operand
and a double result.
On the test code below, i86 CPUs have a consistent behaviour OS- and
compiler-wise (tested on Linux + gcc 3.2 and Windows + VS6), and other CPU
types (Sparc, MIPS and Intel ia64) exhibit different...
|
|
9 |
862 |
|
|
Help needed -- D875PBZ burn-out? by
Thomas K Liu
I am on my second D875PBZ board. The first board had problems from
the start. This second board was ok for a good 2 months. The only
significant change was updating to the P.15 BIOS.
Here's the problem. On boot, I get a lot of lines on the screen. The
boot takes longer than usual. Is the...
|
|
3 |
488 |
|
|
Large hard drive support on D865PERL by
Arsene Lupin
Should an Intel D865PERL motherboard running Win2K+SP4 be capable of
controlling 160 GB hard drives natively (without using an add-on
controller card)?. Mine only sees first first 128 GBs.
Any help would be appreciated.
|
|
6 |
482 |
|
|
Memory in pairs....D865PERL by
Balbino Brito
Hello.
I would like to know on which cases i have to install DDR memory in pairs if
i use the D865PERL.
Thanks in advance.
Balbino
|
|
2 |
474 |
|
|
Supercomputer interconnect technologies, Opteron & Itanium by
Yousuf Khan
This article mentions the various interconnect methods that people are
trying on some of the fastest supercomputers on the planet:
http://www.siliconstrategies.com/article/showArticle.jhtml?articleId=13100603
or
http://makeashorterlink.com/?Z18C422A5
Opteron highlights:
|
|
4 |
744 |
|
|
How useful is Hyper-Threading for average user? by
John-Paul Stewart
John Brock wrote:
I'm planning on buying a new PC this week (there's a sale!), and
I have the option of buying a 2.8GHz P4 with a 533MHz FSB or a
2.8GHz P4 with Hyper-Threading and an 800MHz FSB for almost the
same price. My first question is does this matter at all for the
average...
( 1 2 3)
|
|
20 |
719 |
|
|
Cannot get standby mode to work on D845EBG2 board by
Gregg
Hello!
I am trying to get ACPI S3 Suspend to Ram to work on a 2.0GHz P4 and
D845EBG2 motherboard. I have five other machines on which it works
perfectly: two PIII Intel D815EEA boards, two PIII Intel D815EEA2 boards,
and one old Gigabyte board with a Celeron 333 on it. All computers are
hooked to...
|
August 30th 03 12:32 AM
by Gregg
|
0 |
468 |
|
|
installing XP with D875PBZ + MAXTOR SATA by
Guess Who
You do not need any drivers if you are not using RAID. Just run a regular
WinXP install. The SATA drives are handled as standard EIDE drives. Just
run install and don't use the F6 option.
"Stephen Perez" wrote in...
|
|
0 |
519 |
|
|
Hypertransport group gains TI, IBM by
Keith R. Williams
In article , bbbl67
@yahoo.com says...
AMD's Hypertransport gained two more major chip players in IBM and TI.
Also joining were EMC and Network Appliance in the storage field.
...
( 1 2 3 ... Last Page)
|
|
46 |
1,400 |
|
|
Warning on boottprocedure by
FvM
Hi,
Who can help?
When I boot my system, I got a message by checking de master/slave
connections:
SMART Failure Predicted on Primary Master: Maxtor...... (the HD)
They advise me to make a bachup and to change my HD. By pressing F1 windows
|
|
2 |
533 |
|
|
Whats dead. by
K a h K e e N a n g
most likely, a dead mobo.
"DAVE" wrote in message
...
I got a p4 gateway system here for repair and when you power it up
only the amber light lights up (sleep mode) and all the fans spin up
but thats it. I was...
|
|
0 |
285 |
|
|
3.0 800mhz boxed fan blowing inwards?!? by
Sylvester Cat
Alright, I purchased a retail boxed 3.0 HT 800mhz bus P4 recently. The
(built-in?) fan on the heatsink is blowing into the heatsink and
really struggling to get air moving and is whining as a result of
this. It's very annoying. I have tried plugging the fan into the
different fan headers on my...
|
|
3 |
418 |
|
|
D845PEBT2 and many error,please help. by
Strontium
You don't mention your video card. Are you running the onboard video?
If your answer, to the above, is 'not onboard'...
Try this, in this order: Update CMOS (motherboard).
Update motheboard drivers.
However, I'm suspecting a corrups BIOS.
-
iname1030 stood up at show-n-tell, in
|
|
2 |
388 |
|
|
Power Connector on a SAI2 Mother board by
Robert R Kircher, Jr.
"David Schwartz" wrote in message
...
"Robert R Kircher, Jr." wrote in message
...
If it
turns out that my chassis has the standard 20 pin connector, do I need
to
...
|
|
0 |
925 |
|
|
|
|
0 |
482 |
|
|
Hard drives and Intel D875PBZ by
Aloke Prasad
I'm preparing to build a system using this board. I am reading the manuals
from the Intel support site and had the following questions:
1. If I install two SATA drives (attached to the 2 SATA connectors) and
"RAID them", will the latest version of Ghost (or DriveImage) be able to
image the RAIDed...
|
|
2 |
544 |
|
|
Resolved? by
Thomas K Liu
My apologies. I meant the P.12 BIOS that Intel recently posted on its
website. I believe the problem is a video card. I swapped a new ATI
AIW 9700, and the lines disappeared.
Thanks.
Tom
|
|
0 |
364 |