We have 29 PCs at our lab with this board. All PCs have PIII 700s on it. If you go to the link below, it will tell you the CPUs it support: http://support.intel.com/support/motherboards/desktop/se440bx2/procsupp.htm "lionelhasselhoff" wrote in...

I would like some advice on moving my present system from a Gigabyte 8INXP to an Intel D875PBZ. Here is my current system configuration: Gigabyte 8INXP 4 GB Ram DDR 266 400 GB ATA Western Digital 7200 RPM drives (raid config) SONY DRU DVD R/RW Tohsiba DVD ROM

I've recently dug up an old socket 7 mobo and a late production p120. The chip does 2x75mhz and would like to try 3x but unforunately the mobo isn't working properly. I would like to find out which pin to pull up/down on the chip itself so i can see if 3x75 will work. I've scoured the net and...

"Colin" wrote in message ... Which CPU is quicker? I realise the 3.0 GHz has an 800 FSB and the 3.06 GHz a 533FSB both have hyperthreading, will the 3.0 800 FSB make up the gap in the slightly higher clock...

Bill Todd wrote: "Dean Kent" wrote in message ... "Rob Stow" wrote in message ... Try talking to the guys - including me - who actually...

Top-of-the line IA64 (Madison) is 1.5Ghz with 6MB cache. http://news.com.com/2100-1006_3-1021950.html?tag=fd_top No thanks, I'll take a Pentium 4 3Ghz -- and an order of fries with that.

The die size of the "Madison" Itanium-2 is 374 mm2. The die of the "McKinley" variant is 421 mm2. What is the die size of "Merced" - the first Itanium?

My intent is to detect the number and type of functional units in a CPU with running benchmark tests. Just for the sake of clarity I will talk in "C" below, although, be assured I looked at the assembly and it is what you expect. If you repeat "r1+=r2" on a X GHz P4, you get 2X BIPS (billion...

"Yousuf Khan" writes: In the original 32-bit implementation, I think 12 bits were reserved for system use. That way if they ever page any of these pages out to virtual memory (disk), then the system software can remember where that page is located on the disk...

I see there is a new P4 Northwood out - 2.8Ghz, 800MHz bus. Could this be used in an Intel D850MV with a 400 MHz bus, or must I stop at the 2.6GHz, 400MHz bus? Present cpu is a P4 1.8GHz Willamette. Cheers, RoJ

In comp.sys.ibm.pc.hardware.chips Petter Settli wrote: Dean Kent wrote: use of Arctic Silver and such - which is not recommended). What's their problem with Arctic Silver? I'm not precisely certain. I believe they are worried about grease being extruded out by...

Don't have your type of board but it seems like you have the HD LED wires backwards. Unplug the wires, rotate 180deg and plug it back in. Looking at the diagram of the board, it shoud be on pins 1 and 3. "Bken1" wrote in...

On Fri, 27 Jun 2003 14:23:22 GMT, Jack Crenshaw wrote: I've run across a peculiarity concerning the format used inside the Intel math coprocessor. I have always thought that the format used was in accordance with the IEEE 794 Unless IEEE 794 is something new, I think you...

I recently changed the fan on my graphics card (Riva TNT2 Model 64) because it was noisy when starting from cold. However it now makes a loud hum all the time which is annoying. What would happen if I unplugged the fan? Stop working, blow up the chip, or what? AC -- Using Linux GNU/Debian -...

I am considering buying a Dell system that has Intel Extreme Graphics embedded on the MB instead of a separate video card. My question is, has anyone got this graphics chip to work with one of the ATI TV Wonder products? I am not looking for anything fancy, I just want to be able to watch cable...

Just put my abit be611 motherboard with celeron 1.1gig cpu into a new case. i never really considered how hot it ran before but after opening the case and smelling a little burning (could be dust) I installed hmonitor to find the cpu running between 73 and 75 C. The case is 28.5 C and the fan is...

"David Vantongerloo" wrote in message ... ? ? Will Windows 2000 Work fine wen HT is on or do i have to disable HT on CPU ? ? It will work fine, but it's not optimized for it. The biggest problem is when...

Hello, Somewhere along the way my one year old boxed 845BGL system started to hang after post on the 'hit F12 to boot from network'. I have disabled all boot devices except the hard drive. There is no second boot device. Can anybody tell me how to get this dang thang to boot up without me standing...

Hi, I have just bought a MSI 875P NEO FIS2R together with a Intel P4 2,8 @ 800MHz, and 2 * 256MB DDR 400 ram. Everything seems to work ok, but I am not very impressed with the speed compared to my "old" AMD 1900+ system. I'm thinking maybe I have some wrong settings in the Bios or some...

Dear Friends... I think the next company should be called... "InAmd" Which makes... Intel transform into AMD... and the company which will be controlling everything... will be AMD... :o) hehehehehhe I will be going to invest and buy AMD for sure. Next one will be the 64 bit. Thank you for your...