Instead of having XP freaking ask each time to insert these RAID drivers via floppy... is there anyway I can have it included on a CD or some other device? I want to throw away my floppy drive.... too old.

Thanks to the replies to my previous post, but here is an update, of how the system looks now, but with the same errors! Newly built system comprising of the following: IC7-max3 Mobo P4 3.2Ghz 800Mhz 512kb L2 Cache & Included HeatSink & Fan 2 x 512Mb Corsair DDR 400 P3200 2 x DiamondMax Plus 9...

An old trusty friend looking at her last upgrade =) Can anyone tell me if a new Celeron 1.4 FC-PGA2 will work in the current Abit Slocket adapter? Has anyone tried it? Currently running a 1.0 ghz Celeron but I don't know if it's the A package or not. Gary

I need to know of a specific combination of a motherboard that WILL NOT support 64-bit mode (AMD64/Intel EM64T ) but will work with a 64-bit CPU (AMD64/Intel EM64T capable). In other words a motherboard model that will take, say an Athlon x64 or Intel Core 2 Duo, where the 64-bit capability...

What's the fastest cpu I can run on an NF7-m? I've got a 2100 now. Would it be worth upgrading to a faster cpu? I'm not ready to go to 64 yet. Thanks Thanks Scott

So, I finally picked up an Abit AV8 and Athlon 64 3500+ along with a ThermalTake 1772 cooler. However, the board will not fit in the ATX case. The processor cooler mount backplate hits the chassis before the board gets to the standoffs! Has anyone else had this problem??? I'm at my wits end here....

Time to build a better computer than my old one.... Woudl appreciate any recomendations for MB/CPU/and memroy. My requirements: 1. Reliability 2. Cost 3. As many USB 2.0 (or better...?) as available 4. Highest speed processors but no overclocking

I have an abit kt7 motherboard with 2 256mb memory sticks, both pc133 and an amd athlon 1.2 266 chip. It runs fine with the fsb at 100 but wont even get bios screen up at 133. I thought it maybe to do with when its set to 133 the pci clock is higher. But there is another option that allows u to up...

I have just installed a new NF7-S motherboard in my system. Every time I shut down my computer won't power back up unless I disconnect the power supply and re-connect it first. I tried to see if there was a bios setting that might be causing it, but I don't see anything. Any suggestions...

Hello -- I don't normally cross-post, but in this case I'm quite desperate for help (please see sig for spec). I have recently purchased two Tualatin Pentium III-S, 1.4GHz 512KB L2 cache. In order to get these to work with the VP6, I also purchased two Lin-Lin S370 adapters. After installing...

I have a KR7A-133 Mobo that I have been running two sticks of Kingston KVR266X72RC25/256 modules, giving me 512MB of RAM. These are Registered ECC modules. I have 4 slots on the board and according to the documenation I can put up to 1GB modules in each slot. I have attempted to upgrade with two...

Can someone help dummy here? I've finallly gotten around to needing my SATA controller. When I built the computer the driver was not available and was not included on my CD. When I download the driver from the abit website it's a zip file. When I unzip it there is nothing that I can execute. ...

My computer often sort of freezes when I'm moving it (even with just a few millimeters motion, e.g. when I'm vacuuming around it). The symptoms are similar to when a process takes up 100 % of CPU: very slow responses to my commands - sometimes even a few minutes (the mouse can be moved around...

I have an old KG7 that had an AMD 1800 that ran fine for several years. I am trying to get a cempron 2200 running in it with no luck. I tried several settings in the soft menu but get no farther than the XP logo screen. Is there any any way this board can run this CPU or should I just go...

FX5200,5600 & ABIT NF7-S-v2 mobo AGP not enabled ---------------------------------------------------------------------------- ---- I just put together a new AMD system, using my 1st AGP card(s): a Gainward FX5200, FX5600 in an ABIT NF7-S-v2 mobo, BIOS 11/22/2004 6A61BA1BC-27; 1.2 gig AMD Athlon...

I have an Abit kt7 motherboard with 2 hard drives on the 1st channel and a DVDRW and ROM on the 2nd channel. The hd's have been very sluggish and I only recently noticed that when the computer starts up it reports the drives as running at ATA33. I am pretty certain that this used to bee 133. I...

I am using an ABIT IC-7G motherboard with an AC7 compatible audio chipset by Realtek which is connected to my AV amp via an S/PDIF optical cable. I have all the latest drivers and Windows XP update installed. According to the AV amp the input is PCM even when the computer is idle (ie. not playing...

Has anyone had a problem with slow performance and intermittent pc freezes/total lock up after installing the latest nvidia drivers? My system would just totally lock up and ctrl alt del did nothing. Had to hit the reset button to recover and then my bootup time was excessively long after logging...

I have an Abit kt7 motherboard with 2 hard drives on the 1st channel and a DVDRW and ROM on the 2nd channel. The hd's have been very sluggish and I only recently noticed that when the computer starts up it reports the drives as running at ATA33. I am pretty certain that this used to bee 133. I...

has anybody used it yet ?? http://www.tcmagazine.info/modules.php?name=News&file=article&sid=7129