Hi, I bought a Kingston 256 Mb Ram (133) but my BH6 only counts up to 128. Any Ideas? Thanks Jan

What is the fastest processor that you can use without modification on a KD7-RAID mother board.

What is the fastest processor you can use without modification for the KT7A Raid abit motherboard.

Hi. Downloaded Flashmenu for my KR7A-RAID. Every time I run it, as soon as I run it, I lose connectivity on my Blueyonder cable connection and have to reboot. When I click the button on the lower left to update step by step, the phrase "Handler Created!" appears above the progress bar. I've...

This morning I decided to add a modem card to my freshly built Abit AI7 system. Everything had gone extremely well since I built the machine on Wednesday. After adding in the modem, the system took 5 minutes to go through the POST, and finally boot to Windows XP. I had not experienced this slow...

we have just come into summer here where I live !! I been using computer as usual...It the pass few weeks it been playing up and now is won't boot...My graphics card keeps beeping at me all the time when I boot up...I have taken it to a computer Tech and he told me it works fine....So why does it...

I have a brand new ABIT IT7 MAX2 with a P4 2.4 GHz processor and a Swiftek MCX4000 passive cooler installed on it. Everything is brand new including the case. When I press the ON button the motherboard only boots to the post code display of A7. Well, in the ABIT user's Manual there is no A7 listed...

I have just flashed the bios on my KT7A board ( shoulda left things alone) and now cannot restart the pc or even after I shut it off, I cannot just press the "ON" button to boot. I have to flip the switch in back of the tower to "OFF" then "ON". Then I can boot just fine. What happens is---I get...

Does anyone know where I can purchase a "special USB port expansion cable" per page 2-11 of the User's Guide. I would like to connect 4 USB devices to my existing USB2 Header: Additonal USB Plugs Header Also, if anyone has done this, can they tell me if it worked? Thanks, Raj

Can you run this mobo. with XP 3200 barton 400Mhz FSB, but keep the ram settings at DDR 333? ie can you run ram and CPU settings independently? Will the motherboard accept 1Gb DDR 333 on 1 stick with athlon XP3200 @ 400Mhz FSB? Thanks

I noticed a suffix on Crucial part numbers that (I found out) indicates whether the stick has chips on one or both sides. I've seen both kinds, but I didn't realize this could be an issue--that certain mobos might not work w/both types. But according to Crucial, it's best to verify which kind...

Hey guys, I just bought an NF7-S board and am in the process of building it. I ran into one problem, and that is with my harddrives. The motherboard would freeze at the part that says "Detecting IDE Devices." Well, I did my research and sure enough, it's my older Western Digital harddrives...

Anyone have any idea where I could get a hardware monitoring program besides the one that Abit puts out.Would like one more for the desktop that reads easier than Abits......

Last night i was surfing the internet and my comp rebooted by itself.It can back on andworked fine for about another 45 mins.Well it rebooted again and now it wont come back up,The power is on all fans r on.I tried putting in another harddrive but that didnt work.BTW the monitor dont come on and...

I have a HP- cd rw device that I know is OK from hardware standpoint ( tested on another PC), but on my ABIT KG7 RAID system, hangs up at the end of a cd burn. ( the green light on cd burner flashes, and the burning software becomes unresponsive.) This occurs independently from which program is...

Hello Folks, I need a recommendation for an AMD board that does onboard Raid. Integraded sound, SATA, and Firewire are not required. What kicks ass and is less than $75US ? Thanks, NuTs

Hi Looking for a Mobo which can support AMD Barton 2500+ CPU's USB 2.0 5 PCI slots Do NOT need onboard newtowkr, sound or graphics. do not need RAID either Looking for cheapest possible (and available in the UK)

Hello, I just built a new system, my first build :). My question is how can you tell what version of the bios your are running? I thought there would be a number on boot up or in the bios and the only number I found didn't correspond do any of the bios version from ABIT. Also, in the bios how...

Hi there, i've got a Abit KT7-RAID motherboard and i'm running the following config on win2k. IDE 1 - hdd master and slave IDE 2 - dvd rom and cd-rw RAID IDE 3 - one hdd only RAID IDE 4 - nothing. I want to use my extra hdd on my raid ide port as another hdd. But windows/my bios doesn't seem to...

Let me say first---you guys in this group have given me a great education and have helped me plenty in the past. Now, what I'm thinking about, is upgrading ( well actually---replacing) my current PC--- case and all. Maybe sell or give as a gift my current computer. This is not a good idea for...