Dell get it out of your PC NOW, it will prob explode :) On Wed, 23 Jul 2003 17:35:35 GMT, Lee wrote: All you can do is try and see mate 8) On Wed, 23 Jul 2003 15:23:06 +0100, "Faquin Kant" had the will to write:

I've been hearing good things about the fans that come in the XaserIII Supertower. Does anyone have any experience with them? What is generally considered to be the quietest 80mm casefan at the best airflow? TIA Rich -- Return address modified for spam protection. Remove windy to reply.

hey, does anyone know any reason why a celeron 500MHz running at 6 x 83MHz would run any less reliably than the same processor running at 7.5 x 66MHz...? just wondering if it makes any difference at all... chris

I have a P4 2.4C in a MSI 865PE Neo2-S board 2 Kingston PC3200 value ram 256meg sticks 3-3-3-7. Voltage at 2.60 I ran the mem clock up to 250mhz so the cpu was running at 3.0. Got a error within 2 minutes running Prime95. I then changed the ratio so the ram ran at 200mhz and the cpu at 3.0. Got the...

I put some Kingston HyperX twin 1gb pack,3500-434 on my Gigabyte KNXP 875 board. I did overclock it to 225FSB with a 2 multiplier so the ram was running at 450 with no problem. This is with cas 2.0,7,3,3 for latency settings. I didnt try it at any higher FSB settings,but i am happy with...

Hi I'm building a new computer with the mentioned board and CPU. I wan't to OC this computer and is therefore looking for the right RAM for this. Should I invest in some PC4000 or just use PC3200, PC3500 or PC3700 ? And is there some brands which is better to this than others. I'm quite confused,...

Hey guys.... i have overclocked my p4. 2.4 ghz to 2.8 ghz....... on a p4xp-4 mob..... is a CPU temp of 40C too hot??...

My new 1.6 duron arrived thismorning. I've heard that there all meant to be thoroughbred 'b' cores, just without a chunk of cache. So I was hoping for 2.2+GHz. Well, its an MIUGA, so I thought it might be an A core :o Popped it in and started raising the clock. Got to 1920MHz on stock volts, but...

Well, Skid, this is turning out to be a real adventure. I have three main problem: Win2k is running nicely. 1. The Audio driver for the onboard audio install properly,but I can't hear anything regardless of which hole I stick the jack in. I could just install a separate audio card. I have a...

Can anyone please tell me how easy it is to open the external casing on a slot 1 cartridge? Thanks, Dan.

Any1 ever OC a Cel900 on an Asus CUSL2C MOBO? If so what did you do: up the Voltage, up the FSB. Did U do N-E-thing to the memory (voltage). Whats it runn stable @ OC'ed? Hugh

Troll.... PLONK "Timberwolf" wrote Hi there I'm creating a new PC - I'd like to find out which

I'm building an Nforce2 system (Biostar M7NCD Pro $57 AR shipped from newegg) with some combination of some PC2100 memory sticks I have on hand (all are CL=2.5): KByte 256MB Kingston Value RAM 256MB Crucial 128MB Crucial 512MB

there was no P3-350MHz

I have: 3 sticks of Crucial 512/ddr/266/cl2.5 (wish I had 1 more) 2 sticks of Infineon 512/ddr/133/cl2 (why does it say 133?) 2 sticks of Nanya 512/ddr/266/cl2.5 (never heard of Nanya) 1 stick of Samsung 512/ddr/266/cl2.5 I want to run the Dual-Channel so what combo would be best? Would...

Hi all, My current setup pumps out a serious amount of noise. I have a zalman flower cooler on the CPU which is dead quiet but have to have two fans for the intake and exhause to keey the case temp down. The CPU idles at about 45 and the case temp at 30 degrees C. I often have heavy...

Has anyone got any advice on rewiring a AT 5pin din keyboard to use a 6 pin ps/2 connector. I have a spare AT keyboard which is vastly superior to the crappy keyboard that I'm using now but I dont really want to use an adaptor plug. I have found pinout diagrams but is there any other signal...

Hi, I am finally getting around to upgrading my machnie, (though it's more through necessity than anything else) and I need a bit of help with the choosing what I need. Currently I only have Athlon 1.2, 512 SDRAM and a Grforce4 128mb. Hi, I am finally getting around to upgrading my...

Hi guys. I built a new machine with the following components: E-STAR MIDI ATX 8870 350W Asus P4P800 Deluxe (Bios Rev. 1009.008) P4 2.4Ghz 800 FSB 2 X 256 MB 400 Mhz Geil Golden Dragon 4ns ULTRA 2/6-3-3 2T@PC3200 MSI- MS-8912VTDR Grforce FX5600 IBM 20GB IDE (ATA100)

am gonna get some ram for my new system. due to the lack of funds at the mo..have devided to get everything over a period of time. at the mo am getting new board, Abit NF7-S V2, Corsair Ram(512) and HDD(Maxtor 120 gig) plan 2 get another 512 and another 120gig when i get spare cash. am wondering...