I Need Help To Find Amd Cpu Axms1600fws3b.thanks -- aanwi

Hey all, Ive been an AMD man from the very start. But I have yet to get my first 64 bit version, and its a little trickier than I first thought. I have a new AOPEN AK86-L board on the way. I also am getting a generic new 400w psu and Themaltake cpu cooler. I will add my Simpletech (2x512)...

How far apart are the mounting holes on a 92mm case fan? I have a case that is advertized to accept an 80mm or a 120mm fan on the rear exhaust vent. I accidentally ordered a 92mm fan instead. I didn't notice until it was too late (it laready shipped). Am I going to need an adapter? If so, -...

In a temporary computer I've got a mobile 2500+ on an Abit KD7 mobo. Of course, this mobo likes 133mhz fsb, but it should be able to support a Barton at 166 (shouldn't it?). I ran an oc'ed T'bred in it for a long time, with no problems, but I absolutely cannot make it run this Barton at...

OK here are my requirements. Can someone assist Currently have an XP1700 o/c to XP2600 on an Epox 8K3A. It's hot here at the moment - 31C. Room temp is probably around that too. My case is at 37C but the CPU is sitting at 61C while idle or around 63C when 100%. My current cooler is a Zalman...

Hi I've some problem with ,y Mobo ABit KT7. When I put Athlon XP 1600 it runs at 10,5x100 = 1050 Mhz and it is ok, but after few days when I try to power on the mobo beeps, : 3 long beep, and power down, but if I press the rest button after few seconds everything is ok and bios boot correct and...

czy pisze kto¶ na tym forum w jezyku polskim ?? Mam pytanie jak w³±czyæ funkce aby fentylator na procku zwolni³ i przy okazji by³ cichszy ??

From: "MichalP" Subject: barton 2500 xp Date: 18 June 2005 16:57 How can I unlock the multipler ? http://www6.tomshardware.com/cpu/20030210/barton-03.html#overclocking_to_2500_mhz_how_it_works ..

I have a Xp 2800 (non barton) which should run at 2.25 Ghz and 333mhz fsb, if you see my previous post last week i was haveing trouble running it at this speed. For the last 3 days i have lowered the multiplier to 10.5 and bumped up the fsb to 200mhz. So in effect my FSB is now 400 and my...

http://www.spectrum.ieee.org/WEBONLY/resource/feb03/ncap.html -- Ed Light Smiley :-/ MS Smiley :-\ Send spam to the FTC at

Hi, I have an elderly Athlon 1200+ combined with one of those enormous Zalman copper flower coolers. Once-upon-a-time it was silent. Now age and infirmity have crept in and it's fairly noisy. Also the fan is mounted on a fairly ramshackle arm affair that I'm a bit concerned about as the box gets...

I am thinking about upgrading the CPU on an old MB (with PC 133 DIMMs, 2x AGP, which enables me to use old ATI All-in-Wonder too, which I can't use on more modern MBs.) Anyway, the MB manufacturer says the top CPU that my MB will support is the Athlon XP 1800+, but not the...

I've got an "older" compaq presario 700us that sports a 1.2g amd athlon 4 process with power now... Powertweak (linux) reports it as a athlon 4, k6-2 family. What is that? Would anyone have an idea what this chip actually is? What I have in mind is upgrading it, if it's compatible with todays xp...

Hi, I have been recently having problems with my computer, but only with a certain game, I heard that underclocking slightly might fix the problem, is there anyone that can tell me how to underclock my computer? Here are my specs: AMD Athlon XP 2800+ 2.08 GHZ 512 MB DDR-SDRAM

Hello Everyone (and Wes in particular), Last tuesdaynight I made the change to my system. (see thread AMD Tbred 2100+ with MSI K7T266pro2-ru) First I had to remove a capacitor to make the board suiteable not only for Palomino chips but also for he faster Thoroughbred. Finally the system booted...

Hello, Where can I find informations about modifying multiplier factor of recent Amd processors (64, and X2) ? I did this on old athlons (by L2 bridges) but is it possible on recent cpu 64 and X2 ? Thanks for any response or link, GB

I have in my BIOS (mobo: Abit kt7a) that option: "I/O voltages". It ' s near the "core voltages" and I think it's refers to CPU. However I don't know how use it ? Shuld I increase or decrease ? How it will affect on my system's stabillity.

So I have an MSI K8N Neo2-F 939 MB with a Venice core A64 3200 at 240x10. Can I safely use a passive solution such as a tall Zalman heatsink in place of the somewhat noisy active HSF unit on the chipset or am I asking for trouble?

So guys, how well is the overclocking of the Venice and the San Diego stacking up against previous socket 939 CPUs working out? I hear claims that the Venice doesn't overclock as well, is that true? Please say it ain't so, joe.

Hey, been looking for something to cool my Athlon 64 3200+ rig better than the retail heatsink/fan. Currently running it on an Asus K8V-Deluxe. I was looking at the Zalman CNPS7000A-Cu, but seeing as how its coming in just shy of $50US I'd like to be sure of it before I buy. Anyone know if this...