|
|
A64 3500 by
John Whitworth
Looking at getting a 3500 very soon (and anticipating tomorrow's rumoured
price slash). I believe the following is the parts code for the 130nm co
ADA3500AWBOX.
What is the part code for the 90nm core?
Thanks
--
|
October 15th 04 11:01 AM
by JS
|
5 |
804 |
|
|
Fastest Athlon on this motherboard? by
Gareth Tuckwell
Anyone have experience of the Soltek SL75-drv5?
The fastest CPU listed for this board is the Thoroughbred 2400+ (which I
have).
As it is based on the KT333 chipset, why should it not run bartons at a 166
FSB and I have PC2700 memory and a decent zalman flower cooler, so could I
use a Barton? Or a...
|
|
2 |
1,013 |
|
|
finding dvd drives by
robin.gordon1
I cant get my epox mobo to find my DVD drives every time it boots. I tried
switching the power cables about but this didn't work. I booted with cd's in
the drives but this didn't work either. as a last resort I changed my PSU to
see if that would help but alas it didn't.
occasionally it will see...
|
|
5 |
763 |
|
|
Athlon XP 2600+ 266 FSB by
Ian C
Just fitted an Athlon XP 2600 Thoroughbred to my Gigabyte GA-7DXE
motherboard. When the motherboard is set to 133 MHz FSB, the system is very
unstable and crashes whilst loading WIndows XP. If the FSB is switched down
to 100 MHz, everything runs OK, but the cpu only runs as an XP 1900.
Anyone...
|
|
1 |
689 |
|
|
2500+ Normal Speed.. by
andym
Hi all,
I know that this is an overlocking newsgroup, but I was wondering if you
guys could help me..
I have a 2500+ running on an ASUS A7N8X Deluxe Mobo.
It seems that when I go to the Control Panel - System -General, it shows
that I am only getting 1.09Ghz out of it. I think the default...
( 1 2)
|
|
14 |
1,098 |
|
|
fan direction by
jay
I just took the stock heatsink and put a 80mm fan tunnel on it. What I was
wondering was which way should the fan blow on it or off it? Thanks Jay
|
October 13th 04 11:56 PM
by homeboi
|
2 |
783 |
|
|
Mobile barton 2500, minium vcore to overclock is ? by
Avid Gamer
Ive got mine at 1.65v, overclokced to 2.4ghz, 400fsb, ram latency of
2,2,3,5.
Its stable as far as i know, i can run 3dmark2003,2005 no probs
without lockups.
Could i run the vcore lower even ?
Thanks.
( 1 2)
|
|
19 |
1,380 |
|
|
Antec fan connector. by
robin.gordon1
I've just replaced the psu on my system with a 380W sp antec and it would
seem to have a fan sensor but where does it go. which of the connectors on
my Epox mobo should I use for they're all already in use. I could remove
one of the fans but which sensor should I use. any ideas anyone?
Robin
|
|
3 |
812 |
|
|
|
October 13th 04 06:22 AM
by alexi
|
22 |
2,031 |
|
|
How many watts for athlon t'bred by
Gareth Tuckwell
I am doing some heat calculations:
How many watts (power not heat!) does my Athlon 2400+ Thoroughbred require /
use at standard clock + volt settings? I think I read 60 watts somewhere,
but I don't recall where. I also know this info is on the AMD website
somewhere, but I haven't time to look...
( 1 2)
|
|
12 |
1,979 |
|
|
Cpu life expetancy after o'c? by
Milo Malhame
I have just successfully overclocked my Athlon xp 2800+ from default speeds
of 12.5 x 166 fsb to 11 x 200 fsb. All is running smooth so far and device
manager now detects cpu as an Athlon xp 3200+. I also adjusted the dimm
voltage from 2.6 up to 2.7. My question to you seasoned overclockers is...
|
|
2 |
898 |
|
|
Weird sequence of events with multiple processors seemingly dying by
SpellmanXP
NF7-S mobo w/Mobile Athlon 2500 @ 2455Mhz (11x223)
My CPU temp has always appeared in negative temperatures so I naturally
assumed that the sensor was screwed up.
Needing an idea of what the temp. is, I bought a secondhand Digital Doc. I
managed to get one of the flat sensors wedged into the top...
|
|
6 |
750 |
|
|
Thoroughbred 1800 & Epox 8k3a. by
TechDude
Hi,
I have a AXDA1800DLT3C JIUHB 0312SPMW processor with an Epox 8k3a m/b. 256mb
Crucial 2700 DDR ram.
Although it has worked at around 2100 mhz via m/b monitor - using
overclocking settings of some sort, due to a some glitch with the system I
had to reset it back to motherboard defaults to get...
|
|
1 |
859 |
|
|
slow memory by
allan
Hi
I have a AMD 2500 that I run in 11/200 mhz it makes 2200 mhz.My problem
is the memory.I got two apacer 3200 sticks each one 256mb.This memorys
are made to run in 200mhz speed but trying that just gives me heavy
errors.So I run them in 83% of 200 and thats 167mhz.I been trying
running them in...
|
October 11th 04 08:27 PM
by allan
|
7 |
872 |
|
|
PC4000 RAM and Graphic Card advice... by
SpellmanXP
Just a couple of questions, feel free to ignore the graphics card one - it's
OT here anyway.
1. I have a NF7-S (v2) that I'm forced to run at:
Multiplier = 11 (higher than desired)
FSB=223 (lower than desired)
because my ram is generic PC3200, el cheapo ebuyer stuff.
Is it better to purchase...
|
|
7 |
923 |
|
|
rectangular case fan above pci slots needed by
Leadfoot
http://tinyurl.com/6bpqo
I'm looking for some type of fan that will work in the rectangular grill
above the pci slots. Does noy have to be rectangular but must push air
through the grill
It's for a silverstone tjo6 coming in on monday VBSEG
( 1 2)
|
October 11th 04 03:14 PM
by Rusty
|
11 |
2,661 |
|
|
Starting the A7N8X-E with a Barton 2600 Mobile - Advice needed by
Peregrin
Hi all,
I'm about to turn on my new machine, which will be my first try with a
Mobile Athlon in a Desktop MOBO. Is there a chance I may fry the CPU
before I can get in the bios to adjust the Vcore? The Vcore in the BIOS is
set initially to AUTO. What is that going to be, with a mobile CPU?...
|
|
2 |
1,365 |
|
|
Best Heatsink for an Athlon XP 3200 by
Steve
What's the best heatsink for an Athlon XP 3200. Not looking to spend a
fortune but my idle temps of around 55 degrees C are a little on the high
side and I'd like to bring em down a bit.
Thanks,
Steve
|
|
8 |
1,267 |
|
|
Duron 1.6 's Cooler Master heatsink has cheap zinc oxide paste by
Lim PE
This cpu ( distributed by Adventure Multi Devices SB, PJ, Msia ) came
with this h-sink & paste. Because this h-sink 's contact area with cpu's
die is coarse, hence quality of thermal paste becomes very important,
yet h-sink has just cheap zinc oxide paste.
Cpu cooling was noticeably bad ; ...
|
|
3 |
1,434 |
|
|
O'C MSI K7N2 Delta and Athlon xp2800+ Barton? by
Milo Malhame
I have the above combo and was wondering what the best way to overclock it
is. System is currently running @ default settings of fsb 166 x 12.5
multiplier = 2.09GHz. Memory is 2x256 MB OCZ dual channel 3200. Is it
better to increase the multiplier in bios to 13 or 13.5, or is it better to
reduce...
|
|
1 |
845 |