I will appreciate if any of you guys can provide me notes / publications / guide on overclocking for beginners. My e-mail is: . Thanks.

Any ideas on how to overclock a 1.1 GHz Celeron processor? My warranty is expired and I'm looking for a free (or at least cheap) performance boost. I can't find anything on my exact processor speed (though I've seen info for 1.0 and 1.2 GHz Celeron). I don't know my FSB speed, but I think it's...

Hi all, I have a socket 370 Celeron 566Mhz in an AMR p61wp motherboard. Everything is running great at 566Mhz but I've read the Coppermine Celerons can be overclocked to speeds up to 800Mhz. There's a jumper on my motherboard to force FSB speed to 100Mhz instead of 66Mhz. I've selected it but I...

Hi! I know this sounds silly, and i know notebooks aren't supposed to be overclocked. But still... So if anyone has seen articles about that, i would be most grateful! :) -- --------------------------------------------------------------------------- Regards,

Hi all, Just finished building my system: Intel Core Duo 2 x6800 extreme EVGA nvidia 680i motherboard 2 x 1gb PatriotPC2-8500 1066mhz EL 1 x BFG GF8800 GTX Koolance CPU watercooling

Im a little used to overclocking , i use evga precision to accelerate my gpu a little and i find it very simple But overclocking a cpu is much different , i heard that the only way to overclock a cpu on a 775 motherboard is through the bios Is there an easier way tho ? something like intel...

Hi all, I have original Intel motherboard (D915GAG) inside my PC and Celeron 2.8GHz CPU. I'd like to overclock the cpu, but i have not found such a option in BIOS. There's only option for memory frequency and timing. Previously I had msi board with intel chipset and I have been able to overclock in...

Looking for some info ref overclocking a Dell Intel pc...details below. Is there a clockgen available or a replacement BIOS to access the FSB? Processor Intel Pentium 4 Code Name Northwood Brand id 9 Specifations Intel Pentium 4 CPU 3.2 Ghz Family F Model 2 Stepping 9 Core Speed 3192 Mhz L1...

Bonjour les pros. Question simple : j'ai voulu passer la FSB à 200 dans mon BIOS, sauvegarde puis plus rien. Reboot, un bip, POST semble bien démarrer mais ça s'arrête avant l'affichage de l'écran. Je suis repassé au paramétrage par switch de la carte mère, avec une fréquence de 100 (ce qui était à...

I over clocked my abit KX7-333 board, a bit at a time but then it would not boot up, so I had to use a PCI card to get the screen back, but I can not get any AGP card to work on my board, I had a AMD 2000 XP CPU which is about all the board will take, So what have I done to the board ,,,is it...

I have an intel E4300 on asus P5PE-VM with some DDR 500 memory (PC4000) in single channel mode. When at default bus speed 200Mhz, sisoft sandra memory bandwidth test reports bandwidth of 2918 MB/s Using clockgen to increase bus speed to 250Mhz, sissoft sandra still says the memory bandwidth is...

When I try to overclock my PC, when I reach the first BIOS drive scan on reboot, the computer restarts, and sets the clock speed back to normal. I have tried increasing the voltage by .1 volts, but nothing happens. I'm only increasing the clock speed from 266 to 280. I have a C2D E6400 Cpu on a...

Hi guys, now I've another question, to be more exact, one friend of mine ;) He has ECS group mainboard (L7S7A2) and amd duron 1.5GHz. Today I have tried the pencil trick, joined all the L1 pins with sharp B pencil and returned the cpu into the board. I can change the FSB frequency, but not the...

Can somebody explain the fsb/multiplier settings the chip would be set to at stock... and what changes I would need to make to run this at 2.8 3.0ghz I havent built a system with core 2 duo yet and my expierience with overclocking is with thoroughbred B AMD XP chips which overclocked by...

I've recently bought a new mobo (Gigabyte GA-X48-DQ6), along with 4GB of new RAM (Crucial Ballistix PC2-8500). I've also replaced my PSU, with a Coolermaster RealPower M700, as that was potentially causing me issues, as discussed in an older post. I'm waiting for the new Q9450 to be available...

Hello. I have an ecs l7vmm3 which is supposed to be able to run at 2.5 gHz. It uses an overclocked athlon 2200 cpu. I am able to get a top fsb of 149 mhz, but system info tells me it's running at 1.86 gHz. I should be able to get it up to 2.5 gHz. Anyone know how to do this? I'm a novice at...

i have AMD ahhlon xp 2400+ Thorton,ECS N2U400-a mainboard , 256 DDR infineon 400Mhz and 300W jnc. How I can set my memori to work on 400Mhz.because when i set my memori to work on 250 MHZ my monitor it wont turn on.what I nead to do????help please.

I built a Vista media centre PC with the following components SAMSUNG SH-S182M LIGHTSCRIBE DVD-WRITER INTEL PENTIUM D PROCESSOR 915 2.8Ghz SAMSUNG 205BW 20.1" TFT MONITOR LOGITEC CORDLESS DESKTOP/MOUSE EX110 ANTEC TRUEPOWER TRIO 550W ACTIVE PFC SAMSUNG SPINPOINT P120S 250Gb HARD DRIVE INNO3d...

Looking for moderators and members to help kick-start a new tech forum, which includes an overclocking board: http://www.techtodayonline.com From the same folks who in three months catapulted http://www.photocamel.com into one of the top photography discussion sites.

how fast have you got yours and how did you achieve it. seen a review which had an x-magic running standard at 310/620 but when they stuck tt cooler they got it up to 315/630. I have stick-on heatsinks on the memory but they proved of no use and am looking for something similar to the artic cooler...