Hi, I don't know if anyone is familiar with memtest86 but i have been running it on some memory i have aquired, trying to determine if it is faulty or not. The test has reported two errors. Is it normal for there to be a couple of errors or should it be totally error free? Thanks

I just purchased a new motherboard, CPU, and video card, built the system, ran memtest86 and I'm getting memory errors. I purchased: Athlon X64 3000+ CPU Gigabyte GA-K8NXP-SLI Radeon X550 P180 Case From my old system I scavenged:

wrote in message ... I'm getting memory errors reported with some corsair XMS Twinx2048-3200c2. With the motherboard settings at default (mostly AUTO), memtest86 says there are errors in the moving inversions test (test 3)....

Hi, I've just bought new RAM (SDRAM PC 133) on a web site. I've made a test with Memtest86+ 2.1 using a bootable CD and after 30 minutes (4 pass), there's just one error. What do you think about it ? Best regards.

I was given an old HP Proliant server to fix. It only had a flat CMOS battery. So I run memtest86+ and it says the memory is DDR3-4123! This is a Nehalem EP generation, and only an E5506, which supported 800 speed with ECC. Also says CAS 19, which you would get with DDR4-4000 RAM.

I was just stress testing a core 2 quad computer with 4 GB of ram at the default frequencies. I am going to use this computer for fairly high precision scientific calculations. I just ran memtest86+ overnight, and it produced 2 errors. How stable is this computer? Can someone point me to...

On rare occasions, using a pirate version of Windows I got for $5 but am too lazy to change, I get a BSOD. The other day, while using Google Chrome on Youtube, I got such a problem. I think it's software related (I got rid of Google Updater and Google Chrome Frame, which I think are unstable, and...

I downloaded Memtest86+ v3.5. Test ran it on 2 PCs (a PII and a P4). Ran great - found no errors. I just finished assembling a Core i7 rig and ran v3.5 and the prog freezes 4 seconds in, 7% on the first test. Every time. I just downloaded v3.4 and it is chugging away on the i7 right now - no...

http://www.memtest.org/#downiso

In ordinary circumstances, normally, how many memtest86 passes before you consider memory okay? I got 16 passes okay before one error. So I disabled overclocking and reduced memory timing to 2T, and it ran for 20 passes with no errors. I'm sure it would be a wild guess, but should I expect...

After ONE pass or more? thanks

Hi, I've been having a memory problem with a Mercury PVT800X-L motherboard, and wondered if anybody else has seen similar problems ? First of all I tried to use a 333Mhz DDR module - which should be supported according to the manual. The system would boot OK if the CMOS was cleared, but would not...

jhkghkklhdfuugol;fgdgikutflgery6riopl;fgjjl;gyufyiuyfjghjghj

I have upgraded my MB, cpu, and ram. My harddrive is 40gb divided into 3 partitions:10gb, 20gb, 10gb. I formatted the first partition (windows) with ntfs and installed win xp pro now I find that windows is installed on G can I just change G to C or will this cause problems? any idea's Brian

I just bought a Plextor PX-712A IDE dvd burner. The hardware it is on is an Asus A7V333 motherboard with 768MB ram on XP SP2. The drive is the master on the secondary IDE controller. I previously had a Creative dvd-rom on there and it worked fine. Windows can see the new drive. I took out the...

"Franklin" wrote: I have set my motherboard/BIOS to exceed the normal the bus frequency by just a little bit. Now I would like to test my memory to see if it is ok under the new settings. Memtest86+ from http://www.memtest.org/ looks like a good memory tester. ...

Method for intracardiac therapy using sensor for heart wall thickness Localization of muscle gene ..... rotating and reciprocating piston metering pumps, peristaltic pumps or any ...

I have a motherboard from an HP XL-761. The board has MEW-AM stenciled in big letters between two of the PCI slots so I believe this is an Asus MEW- AM board. The board matches the one shown in the Asus manual for the most part, the floppy and IDE headers are positioned differently. There...

Looking for some schematics of circuits that can decode MFM data stream to binary. Not looking for FDC chips. Thanks.

http://www.newegg.com/app/viewproductdesc.asp?DEPA=0&description=17-167-012&ATT=Power+Supplies&CMP=OTC-B1zrat3 anyone know if this power supply is any good?