Hello I'm expecting a delivery of an XP2500+ mobile Bart CPU tomorrow to replace my XP1800+ on an Asus A7N8X-E del. I'm so broke at the mo that I can't afford to replace my Crucial 256x2 PC2100 RAM for a while. I presume I can run this chip at ~135MHz FSB with a fairly high multiplier? I intend to...

I have narrowed this doen to Asus A7V600 now. Any views will be appreciated for overclocking. ABIT 7 was considered but the use of Duel memory (in pairs is puttig me off).

I have a friend who is running a Barton 2500 in a Soltek nForce2 mobo with 2 x 512MB RAM and bought it around for me to help him O/C it. Firstly I set the RAM to run 'by SPD', it was running at 166 but it's 200MHz RAM so it ran at 200. Then we set the multiplier to 10.5 and the FSB to 200 as well....

Hi, Buying an Asus A7N8X Deluxe Nforce2 motherboard and 2 x 512mb PC3200 Crucial ram. What would be the prefered choice out of the XP2500+ Barton and XP2600+ for mostly gaming use and overclockability? TIA Homer.

Hey all. I've been overclocking an XP 1700 for the last year @ 12.5x184 without any problems. I consider myself to be somewhat knowledgeable about overclocking. Recently I had the opportunity to purchase a week 34 XP 2500 hoping to overclock to 11.5x200 or better. Actually hoping to hit...

Hi there, I'm looking for a bit of help with the following, please excuse me if this is really easy, I'm a total newbie with overclocking. I'm running the following system: XP2500 1Gb Corsair 2700 RAM Asus A7N8X Deluxe Sapphire Radeon 9600 Pro

Guys I will be using one of the ABIT/Epox boards and will want to overclock. Which is the better CPU please? The price difference appears to be only £5 or so

I have an NF7S M/B with an Antec SmartBlue 350W PS, Antec Lanboy case, XP2500 overclocked to XP3200, MS wireless KB and mouse, HyperX DDR400. The system all works fine except for the fact that when I hit the case "power on" switch the system fans start up, the MB green LED lights up, the CDROM...

I've noticed a tiny blob on the die of my dads 2500 barton, inside a sort of square pattern. The same is present on a 3200 we are building. Is this the temp sensor? If so, how come it is so prominent it can stop your finger when you run your nail lightly over the surface? J

I need to know if the XP2500 will run on the Asus barebones Terminator barebones system. The chip is not listed by Asus as a supported chip but I was wondering if it could run the chip at 266FSB instead of 333 ? I placed the order on ebuyer this evening and before I could change the order it was...

Hi, I have an XP2500 Barton core CPU and I would like to try and overclock it to 2200Mhz. I have done some initial tests and I can't seem to overclock the CPU at all. Increasing the FSB by only a few MHz causes windows to fail to boot. An attempt to clock the FSB to 200MHz results in windows...

anyone got any manufacture codes for the above that'll go to 2.1Ghz+ ? cheers Jez

Hi all, A friend is try ing to convince me of the virtues of a xp2500 on a MSI k6n2 Delta. He says this is the combo to buy and it can be pushed to 370 fsb with little trouble. Can any one advise me about this mobo and chip. I really need help. TIA HH

I was running my Barton (T'Bred core) 2500 at FSB220x10 and using 1.725v to obtain Prime95 stability. Temps would go up to 50C socket using 2 80mm exhaust fans and a Vantec Aeroflow in an Antec SX835II case. For memory I was running 2x512MB Kingston HyperX in dual channel (slot one and three). Got...

Well I took the plunge and grabbed an XP2500. Unfortunately it just doesn't want to know at 200FSB, regardless of the overall speed I set. It seems to be a reasonable overclocker, as I've currently got it at 2.3Ghz (184x12.5) at 1.675v and it's solid as a rock, but if I up the FSB any more then...

A large number of people use Prime95 to check out their computer. I would like to know what kind of results everyone is getting. I will start, and I hope others will continue to post theirs. I suggest 2 categories. A - the best time you have achieved, B - the current benchmark. Only post the...

Build is Antec SX630II, XP2500 (AQZEA) NF7-S, Aero 7 Lite @3200rpm, Bios #18, Multiplier 11*200. Vcore 1.675v Been running prime95 and so far so good BUT would like opinion on my temps As is they are Sys: 28 c / CPU: 46 c under load

I am off to buy one of these tomorrow, how likely is it that I will be able to run it at 200FSB? Are there any particular batches of 2500s to look out for, if so, what are the batch codes? Cheers, Dave ---

Just installed my XP2400 on an Asrock K7V88 ( nice budget board) and am able to get 10 X 225 or 10 X 227 with complete stability. However, it will not do 10 X 229. I noticed on this board my 12v rail (thru MBM) shows as 11.38 v - 11.45v. On my old board it was consistent at 12.03 My question,...

I'm running an A7n8x-x mobo, kingmax pc3700 ram, 460 watt psu, vcore 1.7v. 182x 12.5 @ 2277 mhz. Even though I have a 400 mhz mobo and fast enough ram it seems as though I've hit a wall with 182 fsb speed. Tried different multipliers and always the same thing.......can't get past...