I am looking for a mainboard with the below specs: pentium 4 Min Intel 845 chipset min 2 USB, 2 PS/2, 1 parallel, 2 serial port standart ATX onboard audio min 4 memory slot, supports both sdram and ddr All I could fins is Asus P4XP-X and I think it is discontinued. Any suggestions?

Hi, I have a Tandberg DLT1 with a tape stuck in it. Does anyone know how I can manualy eject this tape? TIA RiCH

hi. i am having trouble getting the epson tm-t88iii USB receipt printer to working on redhat 9. can someone please give me a step by step instruction on how to get this printer to work? thanks in advance.

Hi, I have ano old Proliant DL380 machine (so not the G2 or the G3). I need new HD's. These are the partnumbers that should match: 72.8-GB Wide Ultra3 SCSI 10,000 rpm Drive (1") 232432-B22

Hi. Problem with a Dell Optiplex GX260. I need to install a second serial port on this motherboard. On a normal system, I would plug a standard DB-9 ribbon cable on the adaptor. But not here. The connector is on the mobo but no cable was delivered with it.

Hello I am having a problem with my printer it is a HP deskjet 500c. The problem is that I try to print something and it starts to print than it flashes the change cartridge light and I just bought a new cartridge. I lost the manual and have not been able to find it. I went to Hewlett Packards...

Wednesday, April 28th 1:30 p.m. Can someone refer me to a company and/or Web site that I can use to replace bent and broken pins on an IBM "TravelStar" hard drive? The model number for my drive is: IC25N030ATDA04-0. Since IBM sold its hard drive business to Hitachi, I called them and asked if I...

I've been reading reviews: Gigabyte fans say they are easier to (physically) install and have more BIOS customization options. Others say that things like floppy drivers are buried on the CD with no instructions on were to find them. Asus reviewers say the documentation is great, the drive is easy...

I have a palm m500 and would like to clone it to another palm as a backup. I have some programs that are irreplacable and can't be beamed. Is there a program or method for doing this? Can I transfer the programs and data to a card, switch it to another palm, and copy that way? Are there...

I have a PE2300 with dual 500MHz PIII, 3 9GB SCSI drives and 512MB ram. The service tag number on the machine is H50IR. I am tring to install "DELL OPENMANAGE SERVER ASSISTANT" The DELL system detects a BOOTABLE CD-ROM on the CD drive. However is doesnot install from the CD disk. How do I fix this...

I have IBM THinkPAD 380ED loaded with Windows 98. I need to run application in DOS Only by Start Up F8 and go to C: Need to creat an A:Boot Disk that will allow disk for A: or C: to find commport 1 without going to Windows. Any Ideas?. Thanks

does anyone know where i can get a redhat 9 usb driver for the magellan 9500?

hi, How can i set 50kbps on the UART of the pc? please reply back to my email address- Regards, lakshmy

I am working on a friends pc. Compaq, Win ME. Her CD-DVD Rom isnt working. Drivers are gone and windows cannot locate. Cant install from windows CD; havent been able to find on Mitsumi website. Compaq either. Anyone know where and how I can install drivers for this? Thanks, M

can anyone tell me where a good place is to dispose of empty inkjet printer cartridges and toner cartridges thanks

I have a Linux 7.2 machine with kernel 2.4.9-13.i686 , kernel headers-2.4.9-13.i386 , kernel source 2.4.9-13.i386 . I installed LiS-2.13.9.tgz on my machine. my dialogic card is D/41ESC PCI slot, I tried to install the card but if I try to start /usr/dialogic/bin/dlstart, it gives 'error locating...

My Bell Sympatico modem is not talking to my Linksys Wirless B Broadband router. The connection is only able to be made when direct to main PC. As a result the network and wireless is down - any ideas? JAM.

I have a user that all of sudden (according to them, they didnt do anything, of course) the computer asks for the user to press the DEL key for it to continue booting after the BIOS' POST. I reset the BIOS configuration settings via the jumper on mobo and even took out the battery. I had to set...

First things first. I am running a Abit IS 7 board with dual harddrives (seagate barracuda 7200.7 - 40 gigs each). P4 - 2.4 ghz, 1024 Pc3200 DDR400 RAM, ATI 9700 pro 128 mg. SB Audigy. I will start from the beginning. All my computer problems started from one of my fans began to not work. I...

i would like to ask about how to chose a computer. which is better AMD processors Or Intel. How mush its important to chose a cpu 512kb chache rather than 128kb or 256kb If i want to buy a P4 and what would be the best spesifications for Main Board and Ram . if i want it for : 1 word processing.