Hello want some advice please... I currently own a Soltek SL75-FRNRL mobo has a xp 2500+ clocked @3200+ with 768mb of pc3200 ram running dual channel with a 250gb seagate 7200.1 sata hard drive and an ATI 9800 pro graphics card. I have noticed in newer games I am starting to see jerky gaming... I...

New to group, hi everyone. Does anyone know any software that can set FSB speeds etc, because my mobo has no capability to do so. I have seen some software that sets fan speeds and FSB etc, but my mobo and clock chip (ICS 950910AF) are not supported. Any suggestions / recommendations? TIA Bob

Just thinking about upgrading my Mobile 2500. And was wondering shoudl i wait for dual core AMD or get a 939. What shoudl i go for Clawhammer,Newcastle,Winchester ? Would like to get a real 2400 atleast overclocked and stable and at a non leathal CPU temp :) Thanks.

Ohhhh ok,, I understand, so in laymens terms, the majority of programs which determine max CPU speeds stick with the assumed multiplier, like mine being 16.5,not the actual

OK, I've stuck a 3000+ Mobile 133 FSB in a A7n8X-E Asus ATX Mobo running at 12 X 400FSB Thermaltake Xaser case Thermaltake Butterfly 480 Purepower PSU Samsung PC3200 512 X 2 11/3/3/2.5 at 2.8 Volts ATI 9800 Pro Atlantis 256 at 430 GPU / 375 Mem - Thermaltake Schooner VGA fanless HeatSink

Hallo Leutz! Mein o.g Board, nicht getuned, schafft nur noch einen VDD von 1,34, Wird in dem Summery-Screen auch rot angezeigt. Da mit dauernd mein System abschmiert, denke ich dass das zusammenhängen könnte. Wie sollte denn der VDD min sein, das er stabil laufen kann? Und liegt es dann am Board,...

Stephen Bowden Wrote: I've got CPUCool monitoring temperatures. After playing Colin McRae(for want of something better) it got to : Temp 1 41C Temp 2 26C Temp 3 41C So yes, what am I waiting for? I need to give it something more demanding. But I'm not really a gamer and my...

i've got a biostar m7viz mb with a amd athlon xp 2500+ with i gig of pc3200 ram...is this overclockable? and, if so, how? tia...

Wes Newell Wrote: On Wed, 20 Apr 2005 09:46:56 +0100, Stephen Bowden wrote: - I bought the system with the idea of running the cpu at a clock speed of up to 200MHz (400fsb). At the moment its set as a Sempron 2500 (clock 175 MHz) with no other changes in the bios.- So set it to...

Hi, I think I have to upgrade my PSU, the 350 watt which came with my Aopen H600A casing. But there is one issue which puzzles me. The NF7-S still has the 20 pin power connector, with a -5 volt connection. My current PSU (ATX2 with 24 pin connector) does not provide -5 volt. Things seem to run...

Hello everyone This is my present system: Gigabyte GA-7VT600 1394 Sempron 2400 Arctic Cooling Copper Silent 2 rev2 heat sink Kingston Value pc3200 512Mb Arctic Cooling Silentium T2 Tower Seasonic 350W psu +3.3V-28A

Hi, On the Brucial site, http://www.crucial.com/uk/ballistix/store/listmodule.asp, they show 512MB DDR-400 modules running at 2-2-2-6 and 512MB DDR-400 modules running at 2.5-4-4-8 . I'm confused - the DDR500 ones have slower timings than the DDR 400 ones, doesn't that offset the higher data...

Hi, Is there a pencil trick or a copper-wire-round-the-pins trick to multiplier unlock the Athlon 64s? The overclocking potential of a new 90nm Athlon64 3000+ is amazing, but to get the most out of it, it'd be nice to unlock it. I'm talking about the results of this article, among...

Hey Folks, Overclocking the A64 is a bit different than my previous experience. I guess it has to to with Hyper-transport. I've got an A64 2800+ on a Chaintech VNF30250(nforce3) with 512M PC3700. When I first set this up I was able to run the ram at 218x9 FSB tops(1960?) starting from 200. With...

Hi Guys/Girls, Now open for business, AusEstore, online computer/ home entertainment shop. We are a Australian based shop in Melbourne, so at this stage Australian customers only, please. Some brands we stock are, Seagate, Western Digital, Samsung, BenQ, LG, Logitech, Corsair, Gigabyte, Sony,...

Hi, I am looking to squeeze the last possible performance out of my system by replacing the motherboard. I am tryig to delay when i have to replace most of my main components. My current motherboard is an ABit KR7A-RAID motherboard. I have an Athon XP 2600+ proceesor. I have an AGP 8x Geforce...

Hi, There are so many rumours on the WEB about the new AMD 64 (Venice) so I hope somebody out there can answer these questins. I am about to order a new pc and have deceided to wait a couple of weeks and get the Venice instead of the Winchester. Has the Venice been tested with 4 Double sided memory...

Daniel wrote: Hi, I have a crappy modem, which, if the power goes off, it needs to be re-initialised by windows. What I mean by that is, I need to go into the modems setup in control panel, and use the !"query modem" option, before I can get anything out of the modem. Does anyone know...

Ive been trying to get my cpu up from the standard 1800mhz to a solid 2ghz but it will not overclock anything higher than 1890, ive heard of lots of others with the same board getting 2.2ghz and above on this so why on earth am i having no luck? using the software that comes with the board for...

Whats the difference between the regular AMD64's XXXX+'s and the Revision E's? -- A:\DOS\ver MS-DOS version 2.11 A:\DOS\_