|
|
Current knee of Intel system price-performance curve? by
Eric[_18_]
I plan to set up a new Intel/Asus-based system, running 64-bit Win7,
primarily for audio/MIDI applications. RAM-intensive, so I'll be
installing way more than 4GB memory. I'll aneed to buy most of the
system, except for maybe the enclosure.
I mainly need to spec an Intel CPU, Asus motherboard...
|
January 23rd 11 04:01 PM
by Paul
|
7 |
1,120 |
|
|
Sabertooth X58 MemOK/F1 error on boot by
QX
This is a common problem over on the ASUS forum for the Sabertooth
X58. You go into the BIOS and set it for your memory, but when the MB
has been totally powered down, then restarted, you get the:
"MemOK.........Press F1 to continue" error.
..
The solution is to flash your BIOS to the latest...
|
January 22nd 11 05:36 AM
by QX
|
0 |
822 |
|
|
|
January 21st 11 04:36 AM
by Paul
|
5 |
882 |
|
|
|
|
5 |
1,189 |
|
|
need laptop/notebook drive recommendation - please help by
Adam
I am interested in buying another drive for my ASUS N61JQ-X1 notebook.
Two drives currently under consideration are ...
1) Seagate Momentus 7200.4 (ST9500420AS)
2) Western Digital Scorpio Black
Comments? Suggestions?
Or, will a 5400 RPM drive be better as far as heat goes?
( 1 2)
|
January 19th 11 08:17 PM
by Adam
|
10 |
981 |
|
|
ASUS P7P55M motherboard does not always start after power-on by
th
My P7P55M based computer does not always start after power on (i.e.
after pressing the power-on button on the front panel). Occasionally,
about once every 5 to 10 power-on, nothing happens (no boot at all) and
I am forced to press the reset button to start the PC. My power supply
is a Corsair...
|
|
1 |
342 |
|
|
install Windows from DVD by
liu
I am putting a system with Sabertooth X58, i7 930. This is my first
system with SATA. I have a SATA HD, not an old PATA DVD. What do I
need to install both Windows XP 64-bit and Windows 7? Are there BIOS
setting in order to recognize SATA?
Thanks for the advice!
|
January 16th 11 04:08 PM
by liu
|
6 |
427 |
|
|
|
|
2 |
463 |
|
|
What Asus Motherboard for video editing workstation? by
[email protected]
Hi, a friend of mine have just told me to buy an ASUS SABERTOOTH X58
for my video editing. I have just noticed it costs much. My budget for
all workstation is around 2.000 euro.
In your opinion is there another Asus motherboard good like ASUS
SABERTOOTH X58? If you tell me ASUS SABERTOOTH X58 is...
( 1 2)
|
January 12th 11 09:14 AM
by Paul
|
11 |
1,943 |
|
|
Gigabit switch supporting WOL by
[email protected]
Looking for a cheap (less than $35.00) switch from Asus, D-LINK, TP-
LINK etc. that doesn't interfere with wake on LAN. Four or five ports
is sufficient. Any recommendations?
I gather these new cheap switches feature green ethernet technology
that may prevent WOL from working. Here's a quote from...
( 1 2)
|
|
12 |
1,481 |
|
|
Memory voltage on P8H67-M EVO by
ChrisW
I am planning to install Corsair memory on this motherboard that the
Asus QVL shows as tested at 1.5v. The Corsair spec states 1.65v.
Should I manually set the voltage in the BIOS to 1.5v or leave on
"auto"? The motherboard manual warns that voltages above 1.65 can
cause damage to the i5 CPU I am...
|
January 11th 11 07:44 PM
by Paul
|
3 |
715 |
|
|
Apparent Realtek LAN Controller failure by
Puddin' Man
I have Asus P7H55D-M EVO motherboard. It has worked fine for several months.
I have 2 pc's hardwired to 2-wire DSL modem/router. Everything worked fine
until today. The Asus pc (Windows7 -and- XP both) says lan cable is disconnected.
It is not disconnected. The old pc still works fine.
I tried 3...
( 1 2)
|
|
16 |
1,459 |
|
|
Blown MB Capacitor by
Ghostrider
To those of you who have experienced a blown MB
capacitor (in an Asus P5WD2-E), in the vicinity
of the CPU, what is the impact of the damage to:
(a) CPU (Pentium-D 950)
(b) Installed RAM (4GB, 2 x 2GB)
(c) Video card
(d) SCSI card
(e) PSU (625W Enermax)?
|
|
6 |
670 |
|
|
M4A88TD-V EVO/USB3 + 965 BE -- overclocking question by
Percival P. Cassidy[_2_]
M4A88TD-V EVO/USB3
965 Black Edition CPU with standard AMD-supplied heat sink and fan
4GB G.Skill 7-8-7-24 RAM
How fast is it safe/recommended to overclock this combination?
Perce
|
|
0 |
631 |
|
|
Bootable rescue/backup/restore CD/DVD software (Paul??) by
Puddin' Man
Excuse me for barging in on thread "Recommendations for painless
upgrade?" ...
On Thu, 30 Dec 2010 17:14:57 -0500, Paul wrote:
Also, I recommend making a backup copy of your working boot
image. The restore should be the "bare metal" restore kind, where
the restoration...
|
January 5th 11 05:21 AM
by Paul
|
5 |
951 |
|
|
Crucial Ballistix memory problems - are these common? by
Bob F
I have a pair of 2 GB BL25664AA80A.16FE5 memories that I sent in to be replaced
after they started to get memory errors. The replacement pair was in use for a
few months before they started to give me memory errors again. Does anyone have
any knowledge of frequent problems with these...
|
|
7 |
717 |
|
|
VIA Audio problems on ASUS M4A785TD-V EVO mobo by
wilby
I have an ASUS M4A785TD-V EVO mobo that works just fine other than some
daily audio pops, and one channel (2 channel mode) sometimes stopping
working.
My system is Windows 7/64 pro.
On board audio hardware is VIA VT1708S.
The loaded driver is 6.0.1.7400
|
December 20th 10 05:41 AM
by wilby
|
4 |
552 |
|
|
can the realtek network driver be loaded with bartpe by
coltrane
I have a p7p55d-e mb which has a realtek nic. Unfortunately if I boot my
system with bartpe the driver isn't loaded. does anyone know if it is
possible to do this. I realize this is more of a bartpe question than an
asus question but I thought I'd ask
thanks for the help
john
|
|
1 |
510 |
|
|
Video Card compatibility with m2r32-mvp by
Bendiesel
Im looking to upgrade my current card, but I have read some mixed
information about PCI-e 1.0a compatibility with the newer 2.0+ plus
cards. Is this something I need to worry about, or have the issues
been solved through bios updates?
Thanks a bunch,
Benjie
|
December 17th 10 02:35 PM
by Paul
|
1 |
433 |
|
|
USB Over Current Status by
Thomas Andersson
Hi!
I have a P7P55D Deluxe that have been running fine since the build.
Today midgaming session my mouse suddenly went black and ceased to work,
when trying to reboot I got the message that USB Over Current Status had
been detected and it shut down on me. Only by dissconnecting the mouse I...
|
|
6 |
861 |