|
|
XP 3000+ clocked down(?), crashing constantly by
Whitesell (Verizon)
I bought an Athlon XP 3000+ (Barton) and an ASUS A7N8X Deluxe motherboard.
For some odd reason, the board detects the processor as an Athlon XP 1300mhz
(!!!). This may have happened after a system crash...I installed new nVidia
drivers for my GeForceFX 5600 128MB ddr card and the installer hung...
|
|
8 |
527 |
|
|
Advice wanted for a new build please! by
Simon Finnigan
Alastair Stevens wrote:
Simon Finnigan wrote:
I`ve decided that I want to build a new machine around a AMD 2500+
Barton chip. Now all I need to do is to decide on a motherboard,
heatsink/fan, memory and maybe new case/PSU.
OK, I think I might be able to help. I've just rebuilt my...
|
|
8 |
897 |
|
|
FSB? by
Joe
Is the FSB measured going both ways? Hence a FSB running at 166MHZ is
advertised as 333MHZ due to the fact 166 x 2 = ~333MHz.
Thanks,
Joe
|
|
8 |
444 |
|
|
K63 cooling by
Mohd PB
Hello all,
I have an AthlonXP1800 which is going to be fitted with a quieter
fan/heatsink unit.
I would like to use the original Athlon heatsink on my 400Mhz K63 computer,
with no fan.
Would the Athlon XP1800 rated heatsink be enough on it's own to cool the
K63, with no fan?
Have a good weekend!
|
August 3rd 03 07:27 PM
by Bill
|
8 |
225 |
|
|
2500+ beyond 2.1GHz ? by
Vidar Hattrem
i have it at 200X11 with 1.75 vcore, works just fine with aircooling.
"Thomas Andersson" wrote in message
...
Hi!
Got mt Barton XP2500+ running stable at 10.5*200 (2.1GHz) with air cooling
and default vcore. Alls eems...
|
August 17th 03 01:55 AM
by Dark1
|
8 |
361 |
|
|
No midi port on k7s5a pro motherboard by
Lee Leo
I just k7s5a pro motherboard. I have to return it. NO midi port. Jeezz I'm a
musican to need this motherboard to play midi but how can I play midi
device when the k7s5a pro mother does not have one. The manual says the
CMOS setup provides the midi on/off.
|
August 7th 03 08:44 PM
by noise
|
8 |
884 |
|
|
dltc3 vs dutc3 by
Dakota650r
which is a better overclocker?
--
Roy F. Schoppert IV
|
August 11th 03 02:18 AM
by Ken
|
8 |
286 |
|
|
EP-8K3A+ Bizarrre Phenomenon by
Peter van der Goes
My 8K3A+ based PC (built over two years ago) has suddenly lost it's ability
to see and communicate with my home network and router.
Wait! Before you say this is a software problem, please hear me out.
Hardwa
8K3A+ w/Barton 2500+ running at 12.5x166 with 1Gig Geil PC3200 DDR in Antec
SOHO case...
|
August 12th 03 09:35 AM
by Q
|
8 |
559 |
|
|
Rank Amateur by
Damien McBain
I just bought an Athlon 2200+ and Gigabyte KT400 (GA-7VA) mobo. I'm
interested in pushing it a bit. Where do I start?
--
Damien McBain
themadbomber at bigpond dot com
|
|
8 |
710 |
|
|
MAXIMUM TEMPERTURE FOR XP2400+ NON OVERCLOCKED by
RD
Hi Flossie,
"Flossie" wrote in message
...
Do any of you guys know what the maximum cpu temp of a 2400+ XP cpu is as
i
can not find any reference on amd`s website.. It a damm hot day here and
the
System @ 45c and the CPU @ 61c. I...
|
|
8 |
614 |
|
|
Wire mod by
CHRIS 159
"Tony Low" wrote in message
...
Hi all,
Last night, I decided to do the wire mod on my TBred B 2100+. After
removing the CPU, I noticed that it is not as easy as I thought it was.
Are
you guys super...
|
|
8 |
1,011 |
|
|
Memtestx86 Cache Questions by
S.Heenan
Bean wrote:
When running memtest, are both the l1 cache and l2 cache supposed to
be there? You see ive been having problems with my cpu or motherboard
for a while now. Memtest would just freeze up on me at test 5, would
not even report errors at 166fsb. at 161fsb everything works perfect,
...
|
August 4th 03 08:19 PM
by Bean
|
8 |
956 |
|
|
A7N8X and a 2700+ by
gARY
I have this running fine at 166*13.5= 2250 (2800+) and chip temp 49C whilst
doing some major number crunching..
However, I have made 200*11.5= 2300 which worked fine until I tried to push
it to 200*12 and now I can't seem to work out how it kicked in the first
time as I never made this again!
My...
|
August 23rd 03 10:40 PM
by gARY
|
8 |
360 |
|
|
|
July 21st 03 04:32 PM
by jaster
|
8 |
1,131 |
|
|
No POST on A7N8X Deluxe, 2500 Barton by
Patrick
Have you had a chance to check temps? Maybe the heatsink on your CPU is not
mounted correctly and is causing system to fry.
Patrick
"MrDancer" wrote in message
...
Just put together a new system last night, an Asus...
|
|
8 |
1,191 |
|
|
80 mm to 60 mm Funnel for changing Heatsink Fan? by
Patrick
Hi,
I am considering buying a funnel adapter (PcToys Funnel Maxx 60mm to 80mm)
to put a larger fan on my cpu, I presently have a retail Heatsink\Fan
installed on a Barton 2500+ (the combo that comes with the retail cpu). I am
considering using the funnel adapter to get more air on the Heatsink,...
|
July 2nd 03 04:23 AM
by Bill
|
8 |
713 |
|
|
|
|
8 |
396 |
|
|
Performance decrease at 200FSB?? by
Tin-Char D'un
Hi peeps,
Well, back on the topic of overclocking (which everyone seems to have
forgotten) I just hit that 'magical' 200MHz FSB with my XP2600+ and a
multiplier of 10.5... Seems a little odd though as at 180x12.5 I get higher
scores in 3dMark2001SE. Call me stupid if you want but surely to a...
|
|
8 |
734 |
|
|
Which overclock is better? (NF7-S v2.0) by
Robert
Thanks for the answers! More questions below.. ;-)
"QED, eh ?" wrote in message
...
"Robert" wrote in message
...
Hello,
I've just overclocked my new ABit NF-S...
|
|
8 |
1,035 |
|
|
Zalman CNPS7000-CU cooler by
Davek
Anyone have this on an Asus A7N8X Deluxe? The Zalman site
says it's compatible if you don't have a problem with the
power supply interfering....at least that's what it looks
like to me. But before I order this thing I'd appreciate
any feedback from somebody who's actually using this combo.
Did it...
|
August 21st 03 07:01 AM
by Wblane
|
8 |
573 |