I built a AMD 2200+ on the A7N8x non dlx in Sept of 2003. It has been working fine until today, I ran Prime 95 and left the room to do other things. When I came back, maybe half an hour later I turned on the monitor to see the results. The Monitor remained dark I placed my hand behind the power...

Hi all, I have an A7N8X Non-Deluxe with AthlonXP 2700 and 1Gb of DDR PC3200 Ram (2x 512Mb modules). Am I getting the best performance with these BIOS settings? Bios is revision 1002.A, I believe: CPU External Frequency: 166Mhz Multiplier Settings: Auto

I read that one difference between the Abit NF7-S and the Asus A7N8X Deluxe is that the Abit has a fan on the northbridge and the Asus just as a passive cooler. Is this something that someone buying the Asus should be concerned with?

I have an A7N8X motherboard that I believe is sending an excessive amount of noise through the line out channel. My computer is cabled up to my AIWA CX-NA71 (your average AIWA CD/TAPE/RADIO) from my onboard sound card audio out. I've posted an audio recording of the sound I get coming through...

Does anyone know if the AMD Mobile cpu's can function on A7N8X - DLX with (v)2 pcb ..or.. A7M266-D I saw where someone mentioned a wire trick and read where another person sent out a motherboard for repair after trying a mobile chip.

Planning to buy a Barton (2500+ or sg. else) and a A7N8X for. Some of my friends are saying: "Don't buy the simple A7N8X! Go, get a DeLuxe!" Hey folks, what's the reakl difference between the two mobo's (except the money) ?! Thanks in advance; -ha-

which is the better board good and bad points. i will be using an old ATI graphics card (9600xt all in wonder) and I read that they don't work very well with Via does this problem show up on the asus boards. thanks Keith

I use an A7N8X v2.0 MB, BIOS version 1007. Processor is an AMD XP2500 Mobile CPU overclocked at 180FSB, 12.5x CPU (2250MHz). The system is stable at those BIOS settings, along with Aggressive memory timings and VCore at 1.65volts. I have a question about the BIOS Advanced Chipset Features,...

My system powers down when it hits a temperature of 52c. Asus A7N8X Deluxe - Bios:c1005 AMD Athlon XP 2500+ Barton w/ Stock cpu fan Pair of 512MB Corsair XMS pc3200 350w PS Everything worked fine until I overclocked my system to an XP3000+ w/ 200FSB. When I overclocked to that setting (200 fsb...

Hi, I just bought an A7N8X with AMD 2200, Hynix 512 mb and a Diamond radeon 9200 agp8x card. After connecting everything up along with the hard disk I started the computer. The green LED on the motherboard comes on and cpu fan starts moving, but the monitor remains blank in standby mode. So I...

Can someone help with this problem please? We had our system working just fine. Then one son downloaded and installed, from the windows update site, the "Nvidia Multimedia Software update" dated June 17. After this all the sound had gone. My other son who uses the computer most often is...

I would like to know if there are any known issues with the drivers which come with the A7N8X-VM400 cd rom out of the box. I have set up Windows 2000 with the latest service packs and I am getting rather annoying crashes which lead me to suspect that perhaps there are some updates which are needed...

My Dad has just built a PC based on the Asus A7N8X mobo. This is his first build and seems to be fine except that he is having problems installing XP. Unfortunaltely he lives a bit far away for me to visit so I'm having to try to help going by what he tells me. The PC POSTs OK - I know thats right...

HI I have an a7n8x mobo, revision 1.04, with an xp2400 processor. Just updated bios to version 1007 and processor is now reported as Athlon 1800+, can't see any way to change this. Anybody got any ideas? Thanks Jonathan

Gents, I have an ASUS A7N8X Motherboard, Ver 1.04, BIOS 1003. When I had an XP2400+ installed, the CPU External Freq in the BIOS was set 133Mhz, the Freq Multiplier to Auto resulting in an XP2400+ being reported and on the General Tab in System Properties under Win XP, the processor was reported...

I have a rev 104 board and I want to know a few things..I just flashed the bios to 1006 and with that bios it says the motherboard will now allow a FSB of 400MHZ so will this enable me to install an ATHLON XP 3200 BARTON cpu? And if so why when i now look in the bios do I not see a 400MHZ option?...

Hi all, Has anyone who has upgraded to the 1007 BIOS discovered any issues with the time when in Windows? I have found that both my machines (1 is a R1.03 the other a R2) can gain as much as 4-5 minutes an hour. Sorry if this has been raised in the past. regards

I currently have 1001.c and downloaded the 1004 update AN8B1004.bin, so it would recognise my AMD 2500XP I have tried the alt + F2, but nothing typed on keyboard appears on screen (neither is caps lock functioning). I tried running aflash.exe from a freshly formatted floppy (strange because when...

I have this board and an a barton 2500+ Processor. I have tested this chip to 2250mhz stable (prime95 for 24hours, 3dmark 2001SE looping Demo, memtest, etc) However, when I try to run it at 200mhz fsb, even if I drop the multiplier as low as 10.5 (2100mhz) it is completely unstable with errors...

I have a new system here that reboots when it starts to get taxed. Here are the specs: A7N8X MBoard AthonXP 3200+ (I think, I have thoughts, but that is what I bought) 2x512 3200 DDR Kingston ValueRam (I think the 3200 is right) 30GB, 40GB IDE drives SB Live ATI Radon 9600 It seems to reboot more...