Hi all, I just recently installed an IDE into a RAID set on my P4PE. Since installing it, I've been receiving errors, "delayed write failed" on that drive. Drive was working fine before the RAID. Any ideas? Thanks

I cannot get my A: drive to work on my A7V333. Changed cables, drives, BIOS settings etc. Drive is seen by WinXP but cannot read a disk and system will not boot from floppy. Need to up grade the BIOS (1007) to install a 160 gig drive. Can I do it from a DOS boot CD-Rom? An old Zip drive? A USB A:...

Hi I have a problem with the NIC mounted on board at this M/B. I connect the PC in a network. When I try to connect from other PC to that PC, using VNC Client, the PC not responding, but if I use an external PCI NIC Card everything work perfectly. Somebody can help me ? Thank you everbody.

I am about to change the heatsink/fan assembly on my new K8V SE Deluxe board due to excessive fan noise, I don't know much about this subject but , if I understand this correctly , the present processor fan is controlled by rpm on the assumption that higher rpm means more cooling. The replacement...

Hi Guys, need a bit of help please I have just bought and installed a LG DVD Burner 4160B. It installed ok but when I tried to play a dvd, it said the following:Error code F4D41436, this is a copy protected disk. Cannot be played when the TV out function is enabled. I have an ASUS AGP V3800 ...

Hello, I am having problems updating the BIOS on my P4G800-V mainboard. It is currently at version 1006, but when I try to upgrade to 1007, I get the following error message while it is verifying flash: ERROR: Block data does not match file: 0X000F0000 I am using the p4g8v07.exe program that is...

What is it and is it worth it? I think i have 1004 or something oh and how high a processor can i use with this board. thanks in advance

I installed XP Pro on my new PC (3.2GHz Northwood, 1GB PC3200RAM Dual Channel and a 200 and a 120GB Drive hanging on the onboard normal IDE controller). First thing i did after install was to install the Version: 6.0.1.1002 Intel chipset INF utility. But it doesnt seem to "take". If i look into...

hi, can anyone tell me if an intel p4 3.2e ghz prescott 478 pin cpu will work in an asus p4c800-e deluxe motherboard? thanks, paul

Ciao a tutti! Sono intenzionato a comprare un notebook asus M6842NEUH: che ne dite? Magari qualcuno ce l'ha già e sa dirmi se è prestante o meno. Ciao MAX

I have a raid 0 on a p4c800e deluxe with 2 Maxtor 120Gb. Works fine on SATA1 and SATA2 that are on onboard Promise controller. The question is: is it better (faster) onboard Promise controller (SATA1/SATA2) or onboard Intel controller (SATA3/SATA4) ? Thank you.

Hello, A high frequency noise is generated by an induction coil of the ASUS A7N8X-X. The noise occurs only when I am logged in WinXP (e.g. not when in FreeBSD), when accessing particular web pages (e.g. http://uk.asus.com/ is one of them, while http://www.asus.com/ is not !!), or when...

Upgrades from Win 98 to XP are KNOWN to have problems more often than not. XP much prefers a clean install from the full version. -- DaveW "Lars-Erik Østerud" .@. wrote in message news:hcbgd.1349$mm6.493@amstwist00...

Hi, the board work fine for 6 months (except the sound...). Now it won't start up, the green light beside the AGP Port is on. There is no Error code, not even a bleep when I try to turn it on... Power sypply has 420 Watt, another Power supply dind't also not work. Reduced the memory in one...

Has anyone updated the driver from version 1.00.0.8 (available on Asus site) to version 1.00.1.30? Does it work? Thanks! HB

I'm running Windows 2000 on an A7V266E with an Athlon XP1800+. Not sure of the BIOS version, because my CRT turns off when I reboot, and it doesn't wake up again until the BIOS display is just clearing. (Is there some way around this?) Anyway. This thing eats a lot of electricity, and I'd like...

One of my clients has a machine based on this mobo... It is losing up to an hour a day when switched on... I am sure it is a hardware fault, has anyone else had a similar problem?

Hi there, I'm using a SATA HD is there a way of making a Ghost of the hard drive using Norton Ghost 2003 as Ghost doesn't find my hard drive? OS XP Pro. Many thanks, Tim.

Hi Since I've re-installed my WinXPpro to enable ACPI-Multiprocessor-PC, my Scanner CanonScan D1250U2 breaks off the scanning. :-( I've thought the cause is the installed SP2, but after I've disabled Hyper-Threading in the BIOS, he scans like my old WinXPpro installation with...

One more time ... will the Prescott 533 FSB 2.8 MHz with the 1 MB Cache work on my "old" P4PE MB? Assuming it will, does the P4Pe Bios need to be updated (Currently @ 1002)? Also, does anybody have a feel on the performance improvement going from the Northwood 2.53 to the Prescott 2.8? Thanks.