I'm at home for the winter break so I don't have access to my main comp right now. I'm wanting to get some new RAM for a new rig. Okay so I've got a NF7-S 2.0 with a 2200+ XP-M and I'm planning on doing 200, maybe 215FSB with it. Newegg has (1) Corsair Value Select 256MB 3200 for $37.73 + $4.73...

Currently I'm running an unlocked 2500 on an NF7-S v.2 at 3200+ speed at 1.825v. I'd like to try an XP-M 2400 or 2500 to try an squeeze a couple hundred or so Mhz out of it. I'm using Hyperx PC3200 and an SLK900a HS/92mm Panaflo combo. Which processor should I be looking at - the 35w or 45w? ...

I posted this before, but it never went up. I you have a P4PE and are wondering about getting a (800 FSB P4) 200MHz FSB really. Just go ahead and get one. I put my P4 2.6c GHz in the family computer & the board set it to 200MHz of FSB right away. It may not say it anywhere, but trust me, it will...

I just upgraded my son's machine to a P-4, 3.0 Gig, 775 Prescott with 1 mg. cache, but could have gotten a 3.2 Gig older style chip with only 512 L-2 cache. Is that the Northwood? Anywhooo .. does the extra cache and newer design make up for or exceed the .2 Gig of speed that is lost? Which...

Not sure if I know my subject well enough to really be mentioning this but it appears that, after scrolling through messages in this group, there are many ppl who are concerned about the high heats being generated from their Prescotts, and problems associated with those high heats...mainly...

I have a CDR & a DVD-R on my computer. A week ago these were both working no problem. Now when I go to use the Ahead Nero it won't recognize these drives as ones it can burn to. I had this problem before, and when I had to format my drive and reinstall everything they worked. Now it is the...

nothing

«snip»«snip»«snip»«snip»«snip»«snip»«snip»«snip»«snip»«snip» Unless you enjoy the abuse stop responding Kadaitcha Man is a well known Troll

Any1 have one? If you do, & r wondering about (800 fsb/Bus) 200 FSB Go ahead & get one. It will take just fine. How do I know? I've just done it about an hour ago, it takes like it was ment to. No_ONE_Here (Denny. :-) Yeah, always wit that smile, even when times are bad. )

On Sun, 26 Dec 2004 21:37:01 GMT, wrote: DO NOT LISTEN TO LAPYAP POSTS! IGNORE MY LAST POST!, IGNORE IT COMPLETELY! DO NOT PART WITH ANY MONEY! I have recently been taken in, I have thrown away many

I was overclocking an old Celeron 400 MHz processor the other day and was having great success as I had pushed it to over 7 GHz when all of a sudden, somewhere around the 7.15 GHz range, the processor starting shaking terribly. I quickly tried to turn off the computer and unplug the power supply,...

Hi, I have ABIT BD7II-RAID MotherBoard. Recently I upgraded my CPU from P4 1.7GHz (FSB400) to P4 3,06 (FSB533). I own two identical sticks of Kingston Value RAM PC2100, so DDR266, both 512MB, 1024 in total. The basic configuration CPU:DRAM (1:1) works fine. But I would like to set it to 3:4, like...

"DNC_TN wrote My computer has started to reboot on its own and it is getting more frequent. Hi, Did you add a new piece of hardware, or is it all the same from when you bought it?

Hi, I have ABIT BD7II-RAID MotherBoard. Recently I upgraded my CPU from P4 1.7GHz (FSB400) to P4 3,06 (FSB533). I own two identical sticks of Kingston Value RAM PC2100, so DDR266, both 512MB, 1024 in total. The basic configuration CPU:DRAM (1:1) works fine. But I would like to set it to 3:4, like...

OK, the problem I'm having is this... My temps are slowly climbing up on my P4 Prescott using a Thermalright XP-120. I've cleaned and recleaned the cpu and heatsink and applied Arctic Silver 5. When I first did this I had temps around 48C under load. Then they started to climb. When I removed the...

I’m new to overclocking and I’m looking for some help Overclocking a Pentium III 933Mhz with 133 FSB from a gutted Gateway system. I cant seem to change the FSB from BIOS, do I need to Clear the Real Time Clock to do so? The Tech at my local shop said I might not be able to OC it BECAUSE it is a...

Advice please FSB jumpers set at 133MHz. Manual says jumpers provide ways to set to 100 133 and 166. but the table provided does not show how to set to 100. Only 133 166 and 200 (for the KM400A board) Layout is as follows: 'x' shows pins the jumper covers for 133 Mhz

My first attempt to build a gaming PC. The game I want to play smoothly include the demanding "Far Cry" and "Doom III". I will overclock the system to maximise. I am eyeing on the following components Motherboard: Abit AN7 CPU : ATHLON XP 2800+ GRAPHIC BOARD: ATI RADEON 9600XT RAM: CORSAIR OR...

Hello, I would like to know if anyone used this kit and was there any problems encountered. I would like to try water cooling but don't want to invest too much at the moment. Thanks. http://www.xtremecomputing.co.uk/review.php?id=26

I just built two machines. One with a 3.2 gz Intel Prescott (socket 775) and with the 2.8 gz Prescott (775). Both have the same hardware otherwise, including the same Thermaltake case with (replaced) Nexus super-quiet-but-slower 120 mm fans on the front and back. I am NOT overclocking either. ...