I need help changing my FSB on this mobo i can change a jumper and change the clock speed to 450 but when the system is running its still 350 mhz. I cant find a program to download that works with this board is there anyway to access hidden features in the bios? It has a pheonix bios. If anyone...

When I try to overclock my PC, when I reach the first BIOS drive scan on reboot, the computer restarts, and sets the clock speed back to normal. I have tried increasing the voltage by .1 volts, but nothing happens. I'm only increasing the clock speed from 266 to 280. I have a C2D E6400 Cpu on a...

I decided to keep my E6600 on a Striker Extreme 680i MB at 3.6ghz at 1.6v and after a week or so running perfectly stable, I decided to try and lower the voltage a bit. I was able to first drop it to 1.55v and now to 1.52v and it is staying stable. When I first got it up to this speed, nothing...

Ok here is my issue. I got this laptop with windows 2000 I also have this TecNew PC LAN Card but I dont have the installation cd for it. I googled and searched but to no avail... Anyone know how I can install this so I can have wireless internet? I already called my internet provider and they...

Can anyone point me to a good site that has info about overclocking the E6400 on the Intel Bad axe?

I’m looking for some advise on over clocking my machine. I have the following: Asus P5W DH Deluxe motherboard Core 2 Due E4300 CPU (stock cooler) 2x Corsair 1Gb PC6400 Dominator RAM (4-4-4-12) Corsair 520W modular PSU Aspire X-Plorer Case When I’m in the BIOS I can change the CPU frequency from...

I have a 6850 in an ASUS P5B-E. I haven't messed around with it too much but it is stable at 3.825 GHz. In BIOS, I have Vcore set to 'AUTO'. CPU-Z reports the voltage as 1.225, while ASUS probe reports it at 1.54V. Which is correct? TIA

Anyone using these? I heard the bios wasn't up to speed yet? thx bob

Hi everyone! I've been reading in Wikipedia SOLO CORES are DUAL CORE processors with one core severed but actually the same FSB, L2 Cache and so they even have the same socket, the socket M. So is it possible to upgrade a toshiba l100 (with solo core) to dual core? I know that previous pentium...

Hi, today I replaced my old Core2Duo E6600 with a new quad core Q6600 CPU (B3 stepping). After switching CPUs, I find, that my P5B board (with BIOS 1604) does not accept my manuel vcore settings anymore. Whatever I set it to, it will stay at 1.2 v.

Finally got around to OC'ing this thing. I notice one thing right away, and that is the cooler MB/NB temps. The board comes with a small fan for cooling the NB HS that clips right on. It is silent so no noise problems. The manual says you only need it for water cooling, but I would use it...

Hello. Just some questions, might sound stupid to some of you, but: I have a Q6600 on P5K @ 2.40 GHz. Just bought OCZ ram - PC9200, max freq is 1150 MHz. To get them running at this speed, I had to set the FSB to 288 (was 266) and the mutliplier to 9 (1152 MHz). But the processor speed also...

Awhile back I posted on my dilemna of hi temp on my NB heatsink(passive massive copper) on the Gigabyte N650SLI-DS4 mobo. I was OC'd to 8x400 with major voltage increases and had just installed a Thermalright HR-01 775 with a Scythe S-Flex 120mm 1600RPM/63CFM fan on it pointing to the rear...

So I'm helping a guy at work build a new computer. Ok, I'm doing it, and he's watching! New Parts: $114.50 E4300 from ZipZoomFly $ 90.00 XP Home from ZZF $ 62.40 2GB SuperTalent PC2-6400 from eWiz $ 60.00 Antec NSK-6500 case from Fry's $ 6.00 92mm Zalman fan with quiet...

I don't have money of a new PS but I have plenty of old ones lying around. I'd like to use the 350 for the computer and a 250 for the hard drives (5)...I know the green wire has something to do with starting up the ps...help me out guys :-).

Hi, Im Trevor. Im overclocking a Pentium 4 Northwood at 3Ghz to 3198Mhz. The problem is when I clock it to 3200, I start having problems with the sound. It works fine, then at random intervals, it goes away only to come back at another random time. I can't find any pattern with the problems. at...

Well - I don't know...maybe - I know I didn't until I started thinking about what people say about overclocking and how it causes damage, no matter how much or how little...Got that from ThunDA's AMD Overclocking Guide In my case, my system is actually powered down about 80% of the time...

Guys I asume the new (1300?FSB) chips aren't good for us OC'ers? thx bob

Core 2 quad Q6600 sells for under $280. Does that make it the best overclockable CPU deal? Normally, you have to pay more than double in order to double the performance. In this case, is Q6600 equal to two core 2 duo E6600s but the price is only 1.5x of an E6600?

Hello Everyone Well I have finally come over to the darkside. I am am looking for a Heatsink/fan that is very quiet for a E6750 for use with a ASUS P5K WS motherboard. Thank you.