I have my Duron 1.8GHz over clocked to 1.9GHz. After running a bunch of ..mpg files while defragging the HD and other operations, the CPU was up to 48 degrees C with a case temp of 37 degrees C. Could anyone comment if this is a typical CPU temp? Is the difference btwn case and CPU temps...

Hello: Does anyone know if the Sempron 64bit skt754 2800 supports Windows 98SE? TIA

I just moved my two raid 0 disks from the Asus A8V Promise controller to the VIA controller. Saw a 15% speed gain (from 65 to 76 MB/second according to HDTach, from two WD 80GB SATA disks). Also burst rate increased from 112MB/sec to 161MB/second. When rebuilding the raid array, I specifically...

Hello folks, I have a problem with my athlon 64bit 3700 processor. Every time I try to install Windows XP Pro 32bit on to my new custom built PC. Windows hangs during 'setup is now going to install files. This will take several minutes' The LED on my PC and EIDE 52x cd rom LED just suddenly goes...

Any suggestions for overclocking this setup would be great KT7-MAX2 AMD XP 2800 CPU 400W PSU 1.5 GB RAM 3X512 2 DVD DRIVES 2 HDD 64MB GEFORCE GRAPHICS

anyone aware of the issue and know what exactly happens?

I have 2 sticks of DDR Hyperx 466 Kingston, that I want to use in this board. Has anyone had expierience with this mix? I want to use this ram rather than buying new stuff.

Looking for an independent website for the ASUS AN8-SLI Kind of like this one for the ABIT NF7-S titled "Just got my NF7 tweaked today with the stuff my pards said for me to get" http://www.logan.eclipse.co.uk/abit_nf7_(s)_v2_0.htm Hope there is something like that for the ASUS AN8-SLI

And on which board? Asus or DFI?

How does it rate to the newer 3800 and up?

Neo 2 board being used, will the 3500 oc to 2.8 or more?

Which is better for OC, would you see much difference? Decision needs to be made on purchase. Thanks

What is the cheapest place to buy PC3200 Cas 2.0 either 2x512 (1GB) or one 1GB stick. I'm from the uk. Dan

My first big upgrade was a 200mgz to a Celeron 300A that I clocked to 450. That was a DEAL & I loved the performance. I was happy for a while. Then it was a flip-chip P3 600 clocked at 800. I was happy. Then P4s came out, over-priced, neutered, & I jumped ship to AMD & got an 1800+ but ran it at...

Hi, Not sure if i have a overheating processor or not. My set up is; AMD Athlon xp1900 set at 12 x 133 (1597hz) vcore 1.85v. akasa 3200+ rated heatsink and fan. Thermaltake paste between heatsink and fan. My motherboard monitor tells me that the cpu temp is 55 deg c when idle, and the system temp...

Hi folks! Does anyone know how to contact H.Oda!, author of WCPUA2, WCPUID and several others great little programs. I need to email him concerning a semi-urgent matter (at least to me it is). If someone has this info and would be so kind, please email me at: tgeertoughguynet

I'm trying to find motherboards that are compatible with the wind tunnel in the Silverstone TJ-06 case. The TJ-06 is an upside down ATX case with a wind tunnel at the bottom and will help lower temps 2-5C when the wind tunnel is used. However with socket 939 nForce 4 the CPU socket can be placed...

PCClub has the venice 3500+ E3 ADA3500DAA4BP i/e/ Boxed retail CPU for 219$ Should I jump on it or wait a few weeks since I have to buy a MoBo and Video card? http://www.pcclub.com/product_detail.cfm?itemno=A1906525

I just built a AAMD64 3500+ on an Epox Mobo 9NDA3+ ....I had all aort of problems with it the first night and thought the board was bad. I had 2 sticks of Crucial DDR400 512MB each....I fought and fought till I finally gave up. I called in the next day to get a RMA on the board. While I was pulling...

Or other suggestions for an good overclocking motherbaord for the 939 FX-53