|
|
New Athlon XP system by
Dan
I'm building a new rig to be used mostly for gaming and I'm hoping to
keep the price relatively low. I will be overclocking the system to
keep the price low and performance high. I've only decided on the
radeon 9600 pro for the graphics card, as it seems to offer good
price/performance and is a...
|
|
1 |
653 |
|
|
is this a good one? by
homer
MY AMD XP 2500+ is as follows
AXDA2500DKV4D
AQXEA 0323WPAW
is this a good one and how well have others overclocked it?
Core Barton
CPU Model 10
Manufacturing Process 130 nm
|
July 8th 03 07:29 PM
by homer
|
0 |
406 |
|
|
XP2500 200FSB by
Toby Groves
Well I took the plunge and grabbed an XP2500.
Unfortunately it just doesn't want to know at 200FSB, regardless of the
overall speed I set.
It seems to be a reasonable overclocker, as I've currently got it at
2.3Ghz (184x12.5) at 1.675v and it's solid as a rock, but if I up the
FSB any more then...
( 1 2)
|
|
16 |
844 |
|
|
A Question by
Doughnut
Look in the Bios and make sure the FSB is set to 166.
doughnut
"Sean" wrote in message
...
I just bought a motherboard (A Biostar M7VIK) as recommended on amd's site
to be compatible with my also newly purchased 2600...
|
July 8th 03 11:15 PM
by Sean
|
5 |
377 |
|
|
What RAM for 2800XP Barton? by
raffe
I've built a PC based on Asus A7N8X with AMD 2800XP Barton CPU and 1GB RAM.
To this day I haven't managed to overclock it. I wonder if this has
something to do with the RAM I'm using which is 333Mhz. Since I am building
a simmilar PC to have at work I wonder if buying 400Mhz RAM would be a
better...
|
|
5 |
587 |
|
|
|
July 8th 03 11:43 PM
by Eyman
|
0 |
1,155 |
|
|
|
July 8th 03 11:43 PM
by Eyman
|
0 |
937 |
|
|
wich chip by
Dave
Spend £50 on an XP1700 DLT3C from www.cpucity.com and then overclock it to
XP2600 speed easily without any risk of damaging the chip.
If your motherboard isn't up to it, then spend another £90 or so on an Epox
8RDA and you'll still end up having £60 left for beer :-)
Dave
"Graham"...
|
|
2 |
583 |
|
|
multiplier problem by
mjf
I sent my cpu in the bios to 100ghz it runs fine , But the cpu is a athlon
2000+ when I set the multiplier to 166ghz it doesn't boot. the jumpers are
set to default on the board.
the board is a ASUS A7N8X . I'm setting the multiplier to 12.5 should I
go higher. thank you Mike
|
July 9th 03 03:32 AM
by mjf
|
1 |
751 |
|
|
Athlon 1800+ ?'s by
Nicholas Moore
I got an athlon 1800 thoroughbred A. and i would like to know what is the
max voltage i should give it. it's at 1.625 now and what is the max temp i
should get it too, it's at 43 degrees. I'm running it on an Abit KX7-333R
with the FSB at 175 and the multiplyer at 10. i'm wanting to know how...
|
|
1 |
582 |
|
|
Arctic temps by
QED, eh ?
Ran out of AS3 today.
Used the Zalman (white) thermal goop.
Don't know if it's a fair test, but I swapped an XP1700 x 224 =
2128MHz for an 1800 DLT3C@10 x 224 = 2240MHz - and full load went up from
57C to 64C.
Regooping when AS3 supplies arrive, so I'll let you know the score.
On a...
|
|
2 |
350 |
|
|
|
|
18 |
1,811 |
|
|
computer will not start by
James Walker
Hi guys,
I have a problem with a soltek sl-75dvr5 motherboard. It has a amd1800+ chip
and 512mb ddr333 ram
The problem is at start up. I have take everything out apart from the
graphics card, and when I turn on the cpu fan seems to rev like someone has
there foot on an accelerator. if I take the...
|
July 9th 03 10:58 AM
by CoCo
|
3 |
596 |
|
|
|
|
2 |
644 |
|
|
please can someone clarify, this is making my head spin :( (semi long) by
+c0re-
The Nforce2 400 and nforce2 ULTRA 400 are two different chipsets correct?
I've been told by one vendor that stocks a board I want that they are the
same, but I believe the ultra is double the ram bandwidth.
I see a heck of a lot of confusion on all the online shops I've looked at, I
think the...
|
|
3 |
948 |
|
|
problem with nf7 v2.0, 200fsb, 2 sticks ram by
Geoff
specs to start with
xp2500 (1.833ghz normal speed)
2 x 512pc3200 twinmos m-tec ram
nf7s v2.0
running at default values for bios apart from:
200mhz fsb x 9 (for 1.8ghz)
prime95 fails with 1 stick of the above ram in the double dimm slots
|
|
5 |
976 |
|
|
Marks out of 10 by
gARY
I was thinking of tinkering with this as my first bit o' kit ........
-----------------
K7S8X Socket A Motherboard
· Includes 8X AGP Slot
· USB 2.0 and 10/100 LAN onboard
· 3 x DDR 333/400 Slot
· Supports FSB 200/266/333MHz
· Onboard 5.1 Channel Sound
|
July 10th 03 02:22 AM
by gARY
|
1 |
614 |
|
|
Have AMD K6-2 450Mhz by
Paul Eastwood
Hi,
I am new to this NG, I have prob with my processor(I think), if I enable CPU
Internal cache in system bios I get a windows protection error. I've tried
complete reinstall on clean HD.
Windows works fine with the int cache disabled, albeit V slow.
I used CPUINFO which reports no L2 cache even if...
|
|
1 |
387 |
|
|
Raid, NTFS & partitions by
Shap
I am building a PC. This is known as I have asked a few questions along the
way, and have always gotten great feedback. Things are coming along well,
but curiosity has struck again and I turn to you all for help....
I am going to place 2 Western Digital 40gig 5400 Drives in Raid 1, so the
files...
|
July 10th 03 04:36 AM
by Shap
|
0 |
419 |
|
|
Slightly fluctuating voltages = bad? by
Jorgen Smith
Hi guys,
Just wondering, could the following slight fluctuating of voltages lead to
instability whilst overclocking? I'm on an Asus A7N8X-Deluxe, 2600+ @ 10.5 x
204, Corsair Twinx 3200LL @ 6-3-3-2 2.7v (in synch at 204). 4 IBM drives in
Raid 1+0. Just stock AMD cooler/fan at the moment (see my...
|
July 10th 03 08:20 AM
by Lim PE
|
3 |
724 |