|
|
|
|
1 |
5,270 |
|
|
server to reboot by
ban1414
When we login to the ILO, where and what are we supposed to click on to
force the server to reboot when it's hung?
We are testing this by having the server boot onto the SmartStartCD instead
of crashing a live Windows 2003 OS, even though this is not (yet) a
production server.
|
October 25th 08 08:09 AM
by ban1414
|
0 |
4,568 |
|
|
pinout for backplane of HP/Compaq Proliant ML350G4 by
[email protected]
Hi everyone.
i hope got some directions from yours, i try to use the Redundant
power supply of this server with my standard ATX Motherboard, these
backplane got's 2 power connectors like WTX Standard but, theres no
concordance with the voltage signals of this.
then i try to find in the entire...
|
|
0 |
4,562 |
|
|
Installing bigger HDs in Storage works 4214R by
Gaston Perez
Hey guys,
I have an old Storageworks U3 Drive Enclosure 4214R and this is my current
configuration:
1 RAID 5 Array with 8 x 36 GB SCSI (15K RPM)
I wonder if I can use bigger disks of 72 , 144 GB or even bigger on that
unit?
|
|
2 |
4,745 |
|
|
20 Pin ATX Tester by
Kevin Childers
Got a friend selling these pretty cheap, thought I'd pass it along.
20 Pin ATX Tester
CoolMax 20 pin ATX power supply tester. Quickly isolate and verify power supply failures. Checks all ATX output voltages, +3.3V, -12V, PG, +12V, +5VSB, -5V, and +5V via LED light. Also checks 4 pin peripheral...
|
|
0 |
4,591 |
|
|
Question on P600 Controller Slot Change by
W[_3_]
I have a bit of a problem with a DL385 server using two P600s and would like
some advice. The initial installation was done in error putting the boot
device on an internal P600 SAS RAID controller in slot 3. Later on another
P600 was added in slot 1 that connects to an external array on an...
|
January 10th 09 03:05 AM
by W[_3_]
|
2 |
4,507 |
|
|
ML330G1 CPU more than 1000Mhz by
[email protected]
Hello NG,
i found on my favorite onlinedealer a ML330 G1 with an CPU with
1266Mhz. I have an 933Mhz CPU in this Server, i try to exchange the
CPU with an 1133Mhz CPU from my ML370G2, but the CPUtpye doesnt work
in the ML330.
Anybody have an idea what is wrong?
thanks Kira
|
|
0 |
4,752 |
|
|
What linux distributions are you using? by
Rick F
I'm currently running Fedora 6 (FC6) and it works fine but I'll be
moving to something a bit newer within the next
week or two and thought I'd ask what else is out there that can
support the Proliants out of the box like Fedora
can -- specifically handling the RAID filesystems properly. I...
|
February 19th 09 01:58 AM
by Rick F
|
1 |
4,843 |
|
|
|
|
0 |
4,839 |
|
|
|
September 21st 09 06:20 PM
by Rick F
|
0 |
4,782 |
|
|
Compaq Proliant ML350 (G1) no longer booting by
Trojan Hussar
Anyone know if the LEDs inside are in any way diagnostic? I have an
ML350 G1 which I just sold on eBay and typically in the last week it
has developed a fault (it worked fine when I listed it).
I can see a red LED next to each processor slot these are only lit
very dimly, and a further red LED...
|
|
0 |
6,455 |
|
|
Active? by
Phil
"Phil Gilmer" wrote in message
...
Is this group active at all?
I guess it died, I have checked it from time to time and about to delete it
from my lists.
|
|
1 |
6,027 |
|
|
From the crest of Olivet... by
E Bmums
"From the crest of Olivet, Jesus looked upon Jerusalem. Fair and
peaceful was the scene spread out before Him. It was the season of the
Passover, and from all lands the children of Jacob had gathered there to
celebrate the great national festival. In the midst of gardens and
vineyards, and...
|
|
0 |
30,532 |