|
|
cpu failure...or is it? no beep, no post, etc. by
Alex
Out of curiosty, why do you have to cut power to the mobo? My mobo has a
jumper that you can switch in order to clear the cmos. j/w.....
-Alex
"Dion L Heap" wrote in message
...
"dryOtto" wrote in...
|
July 3rd 03 01:38 AM
by Dave
|
2 |
723 |
|
|
AMD MP & northbridge fans by
Blaedmon
I have a dual AMD Tyan system - and I reckon the chips and especially the
northbridge chipset could be cooler. Unfortunately my case is pretty average
for air circulation - its design allows only 2 fans.
What fan/heatsink combos are excellent for Amd MP's and chipsets?
Thanks.
|
|
0 |
913 |
|
|
OC by accident by
Dodge Tom
I changed from T-bird 1.4ghz (266 fsb) to T-bird 1 ghz (200fsb) on Tyan
2390B and when I booted this up, the post showed 1,333 mhz! Whoa... a big
fsb jump! I let it boot into Windows. No problem! I haven't used this board
for about 2 years. It doesn't overheat even with using stock AMD...
|
July 2nd 03 11:54 PM
by LBJGH
|
4 |
633 |
|
|
BIOS Setting for A7N8X Deluxe and AMD 2500+ Processor by
RJW
Mark,
You say that you have gotten the POST to work - did you have problems? I
have the same board and have yet to get the POST to work. I have RMA'd it
back to the reseller and they say it works fine. I have tried everything I
can think of to get it to work and was wondering if you had some...
|
|
2 |
1,226 |
|
|
Ram questions by
Wes Newell
Well, sadly I'm thinking about replacing one of my trusted KT7 boards with
a DDR model. Don't have much experiences (0) with the newer rams. Been
doing some research and I'm looking at Buffalo tech. Either PC3200 or
PC3700. Both of these appear to use the Winbond chips and reviews of the
PC3700...
|
|
9 |
610 |
|
|
CPU Cooling... by
Pheare
Hey all,
My local computer shop sell the Thermalright line (among others) of cpu
coolers.
http://www.memoryexpress.com/FrameCPUFan.php (keep in mind, these are cdn
dollars)
I am looking at the SK-7, but am not sure if I will need a fan and, if so,
how many cfm's to go with.
|
|
1 |
643 |
|
|
Whats the difference? by
Andrew Poyser
What is the diffenece between a palomino and a thoroughbred?
and is one esier to overclock than the other 1
cheers..
|
|
2 |
602 |
|
|
ASRock K7VT2 by
Stooby Doo
Hi all
I've been thinking of upgrading my aging Duron 900 & I've seen a good
offer for an AthlonXP2400+ & an ASRock K7VT2 MB, just wondered if anyone
had any experience with overclocking on this particular MB, is it any
good, can I expect to get any higher speeds out of this processor with...
|
|
3 |
637 |
|
|
|
|
1 |
986 |
|
|
Typical XP2500 overclock? by
Ben Pope
Toby Groves wrote:
What's the typical overclock you can get out of these things, and what
percentage of them will hit 200FSB?
Depends on a whole host of parameters.
Typically 2.2GHz on Air, 2.4GHz on water and probably over 99% will hit
200MHz FSB
Ben
|
|
0 |
665 |
|
|
|
|
2 |
761 |
|
|
Barton HSF - OEM or Retail? by
Wayne Youngman
Greetz all,
how is the retail Barton heatsink? I'm thinking of building a test AMD
system for stock use, maybe a little Overclocking. Thinking about expense,
is it worth buying a separate cooler or starting with the stock HSF?
Wayne ][
( 1 2)
|
|
10 |
720 |
|
|
help me oc sorry in new by
joe
ok my motherbord is a fic az11
i have AMD Duron, 801MHz, 64KB
wandering if somone could even tell me the basics on how to pump more juice
out of the lil ****er..
thnx joe
|
July 2nd 03 08:14 AM
by joe
|
0 |
385 |
|
|
2600+ overclocking by
JIMBO CHIVERS
Hi all ,i've got an XP2600 throughbred b processor running on an Asrock
K7S8X mobo (cheap i know).
What would be my chance of getting it to run at the same speed as an XP3000.
It's currently showing as an Xp2700 running at 2200mhz .
6.25*352.
|
|
5 |
433 |
|
|
Why doesn't Pin Mod trick work fo rme? by
LBJGH
All the palomino's are locked. You have to close all the L1 bridges to
change the multipliers.
"Ed" wrote in message
...
I have a palomino 2000+, tried to change the default multiplier of 12.5x
to 13x. The mobo supports up to...
|
July 2nd 03 04:48 AM
by Enigma
|
1 |
694 |
|
|
80 mm to 60 mm Funnel for changing Heatsink Fan? by
Patrick
Hi,
I am considering buying a funnel adapter (PcToys Funnel Maxx 60mm to 80mm)
to put a larger fan on my cpu, I presently have a retail Heatsink\Fan
installed on a Barton 2500+ (the combo that comes with the retail cpu). I am
considering using the funnel adapter to get more air on the Heatsink,...
|
July 2nd 03 04:23 AM
by Bill
|
8 |
713 |
|
|
2-3-2-6 vs. 2-2-2-6 ? by
Thomas Andersson
Hi!
I've tried to get and answer or find information about this, but without
success so far.
It's quite simple, I'm about to chose ram for my A7N8X-Deluxe (w. Barton
2500 to be run at 200Mhz).
I've decided on Kingston Hyper-X, just not what sticks to use yet.
I will get 2*512MB (PC3200, to be run...
( 1 2)
|
|
19 |
868 |
|
|
A7V133-C by
Christian Spřer
can i use an athlon thunderbird c 1333mhz on my Asus A7V133-C motherboard
(PC133 sd-ram)?
|
|
2 |
516 |
|
|
Overclocking AMD Athalon 950 by
Allen Jeffrey
My Question Is Would It Be Safe To Overclock An Amd Athalon 950 And If So
What Is The Safest Way To Do This Wihout Burning Somthing Up?
|
|
2 |
466 |
|
|
Overclocking AMD Athlon 950 Socket A by
Allen Jeffrey
My Question Is Would It Be Safe To Overclock An Amd Athalon 950 And If So
What Is The Safest Way To Do This Wihout Burning Somthing Up?
I Have A Socket A Athlon 950 And An Epox 8KTA3PRO Motherboard.
|
|
0 |
942 |