|
|
A7N8X R2.0...I Thought they Fixed this problem?!? by
Archer
I have this board and an a barton 2500+ Processor. I have tested this chip
to 2250mhz stable (prime95 for 24hours, 3dmark 2001SE looping Demo, memtest,
etc) However, when I try to run it at 200mhz fsb, even if I drop the
multiplier as low as 10.5 (2100mhz) it is completely unstable with errors...
|
|
5 |
675 |
|
|
A7N8X reboot at FSB 166mhz? by
Mr. Nangla
Hey Guys,
I built a A7N8X deluxe rev 2.0, 2600+ (333MHz), 512Mb PC2700 333MHz, Gefore
4 ti 4200 8x (64Mb) Windows Xp pro and at 166 FSB it just keeps on rebooting
It's stable at 100 FSB, only with memroy frequency at Auto (not by SPD).
I've got the latest BIOS 1005, nforce drivers, leadtek...
|
|
5 |
682 |
|
|
A7N8X reboot at FSB 166mhz? continued... by
Mr. Nangla
Hey,
I tested it at 166 in safe mode with new drivers, and also with AGP fast
write and AGP 8x disbabled.... still crashed, don't think it's a driver
problem. I also used some easy memory timings as Ben Pope suggesed no luck!
I'm going to get some good ram from www.ebuyer.com, crucial seems to...
|
|
4 |
775 |
|
|
A7N8X XP 2800 + Oc by
matra
let's see
x11 200 Mhz=2.204
x11 209 Mhz=2.308
In Both cases pretty Stable any suggestions to go faster...
: )
|
|
3 |
178 |
|
|
A7N8X, Barton 2500 ,Vcore question... by
Mike T
Hello,
My MB refuses to lower (if i try this in the bios) the Vcore below 1.65 v.
(I wanted to do so, because i read about it in an article on overclocking)
Higher is possible. Is this normal?
Mike
|
|
4 |
700 |
|
|
A7N8X-Deluxe FSB settings? by
SomeBody
I have recently put together a new system for myself, stats below.
I thought I remembered seeing somewhere that the A7N8X-deluxe could set
the fsb from 133-250Mhz, but I could only set it from 133-200. Did I miss
read something or did someone post some wrong info?
I've tried setting the multiplier...
|
January 15th 04 03:12 PM
by Gene
|
1 |
265 |
|
|
A7N8X-E Deluxe 3000 NOT 1800 problems by
Wes Stebbins
I have a A7N8X-E Deluxe board with a AMD 3000+ (OPN: AXDA3000DKV4E) CPU.
Everyting was purchased from NewEgg. Whenever I go into the BIOS (Phoenix -
Award BIOS v 6.00PG) and set the CPU External Freq. to 200Mhz (choices 100,
133, 166 and 200), Clock ratio to 10.5, Nominal Voltage to 1.65V, etc....
|
September 6th 04 08:13 AM
by Almeyda
|
2 |
748 |
|
|
A7N8X-E Deluxe dual channel noticable? by
Scorpio
I have now got an Asus A7V600 with an Athlon XP3200 running at 11*215.
Mem sticks are Corsair DDR 400 Pc 3200 Value edition Cas 2,5
Is it worth it to buy the A7N8X-E Deluxe wich has Dual Channel DDR400 .
I dont mind if the mem turns out to not working ant dual mode, I'll trade
them in for proper...
|
|
7 |
362 |
|
|
A7N8X-E Deluxe FSB problems by
Paul
Just got hold of A7N8X-E Deluxe and 1GB GEIL PC3500 but am having
problems getting the FSB to work over 200Mhz. The CPU im using is a
XP2400+ (Tbred-B) which is known to be able to clock reliably to about
2250.
The maximum FSB in which the machine will boot windows is 202Mhz except
strangely...
( 1 2)
|
|
11 |
702 |
|
|
A7N8X-E Deluxe motherboard volt mods by
Ted
Trying to pump more out of my 2500+ Barton...can I get cpu voltage up to
2.0+ (currently 1.88v)
No luck using google
Has anyone had any luck?
Currently I get 11.5x200 or 11x209 (always want more) just under 50c heavy
load
Links or comments, please!
TIA
--
|
April 12th 04 12:38 AM
by Moods
|
2 |
217 |
|
|
A7N8X-E DELUXE Networking by
COCA COLA KID
To run a network of 2 PC's with this mobo do I need a router? And if not is
there anything special I should be aware of?
PC 1 has and A7N8X-E Mobo and PC 2 has a A7V600 mobo
|
April 4th 04 02:37 PM
by Alan
|
9 |
405 |
|
|
A7N8X-E FAQ by
Alni
Hi,
Is there an A7N8X-E FAQ anywhere ?
Thx
--
Alni
|
|
7 |
526 |
|
|
A7N8X-E memory question by
Steve D
Ok here is the situation.
I have the above mentioned MoBo. I have been running a matched pair of
patriot ddr 3200 CL2 400mhz for a total of 512 (slot 1 and 3). I run this
at a 1:1 ratio with my AMD xp 3000 (333mhz). Everything looks fine.....now
in this day and age 512 isn't enough so i got...
|
|
7 |
354 |
|
|
A7N8X-E running XP-M2500+ @2300MHz by
Paul Busby
I ordered 2 sticks of Crucial 512MB PC3200 RAM last Sunday & fitted them
Tuesday night. having removed 2 sticks of Crucial 256MB PC2100 which ran
with slack timings @172MHz, 1:1, 12.5x & 1.575V.
Entered the bios & set the FSB to 200MHz with a multiplier of 10x, upped the
CPU supply to ~1.75V then...
|
|
4 |
181 |
|
|
A7N8X-E XP2400+ to ??? by
Alni
Hi,
Knowing that AMD XP series are on the way to be discontinued,
what should be my best choice to replace my XP2400+ ?
-XP3000+ / XP3200+ FSB400
-XP3000+ / XP3200+ FSB333
--
Alni
|
|
7 |
309 |
|
|
A7N8X-X & 2400XP overclock =o) by
Chris
I had my 2400XP running @ 2150/143 on my old K7S5A. Just picked up an Asus
A7N8X-X and it's now running @ 2333/166. Talk about a night and day
difference in performance! Asus Rules!
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup...
|
October 1st 04 07:43 AM
by Chris
|
0 |
401 |
|
|
a7n8x-x & Barton2500+: problem with 200Mhx FSB by
Barton+
Hallo!
I bought a Barton 2500+ Processor with Asus A7n8x-x and 1 bank of DDR400 -
512MB Elixir Pc3200.
My problem is that's impossible to run my pc with FSB at 200Mhz.
I mean, if i go with 166Mhz FSB, my pc is rock solid even with 166x12,5! (i
run a lot of test as Prime95, 3dMark2001 etc...) but if...
|
September 9th 03 02:22 PM
by Dark1
|
9 |
304 |
|
|
a7n8x-x DDR channel problem by
Basek
Hi all,
I have a a7n8x-x, works great, 2500 barton running as 2800 supa stable
only problem is that it will only see one stick off DDR. I have two 512
kingmax modules and no matter which slots or which stick I use it boots with
message...
'166mhz single channel mode'
I've checked for setting in...
|
August 14th 03 10:43 AM
by rstlne
|
5 |
213 |
|
|
A7N8X-X volt mod by
Moods
Does anyone know were I can find a volt mod for the asus A7N8X-X or can I
use the volt mod discriped on
http://www.maximumoc.com/guides/a7n8x_modding.html for the A7N8X delux?
Thanks guys,..
--
Ugh!
|
January 4th 04 01:11 PM
by Moods
|
4 |
483 |
|
|
A7N8X-X, retail Barton 2500/333 @ 2200/200 by
Tundra Wookie
I just got a new board, proc and mem today, threw it together and me being
the space cadet that I am, set the FSB to 200 in the BIOS. On boot I raised
an eyebrow when I saw it reporting a 3200+ and it proceeded to boot
peacefully. I've been running it and abusing it for the past 10 hours...
|
|
5 |
406 |