I have a KT7A-RAID motherboard, and I am trying to add a third hard drive using the raid IDE ports on the motheroard. The hard drive is recognized when I boot the computer, but windows doesn't want to accept it. The error I get when it trys to install the Mass Storage Controller states that...

"chriske911" wrote in message ... is there a problem with the driver for HPT370 and Windows XP sp1a ? every time I try to install by directing Windows to the correct inf file for XP I get a message telling me there is an entry missing,...

Heelllppp!!! Just replaced my SOYO Fire Dragon with the a new Abit IC7-G, 3.2GHz P4 and 2 sticks of Corsair memory. I'm not trying to overclock, just using default settings. After boot, I get an boot error (NON SYSTEM DISK) It boots OK to a floppy disk. I've tried two different harddrives, one...

Just to report (because I am pleased) that I replaced half a dozen bulging capacitors on my 1999 BF6 yesterday and it appears to be working fine. Just as well I had upgraded to broadband in the year I have been without it as there was over 30Mb of Windows updates to install. So now I have a...

Ronny Hedström wrote: Microsoft Partner this is the latest version of security update, the "October 2003, Cumulative Patch" update which resolves Dear Microsoft: To date, I have applied 7922 updates which I've found in various newsgroups. Would it be possible to combine them into one...

I have an Abit BH6 1.0 with latest bios rev.SS I want to install Windows XP-Pro. Will I run into any hang-ups? Here's the rest of my system specs: PIII-600 256MB PC100 SDRAM, CL-2 ATI 9700 AGP card Diamond Monster Sound MX300 soundcard (Aureal Votex-2 chipset) 160GB ATA-100 HD w/8MB cache...

I'm looking for an alternative to booting a pc from a hard drive. I'm most interested in a way to bring the computer up much faster. It should involve something plugged into PCI, IDE, or USB but not a removable media drive like a CD drive. Does anyone know which motherboards give you an option...

Hi there, I just bought a CD-Burner on which there's an USB cable attached, linking the built-in 4-slot card reader (on its front panel). But now I'm just not 100% sure where this USB socket is located on my mainboard...if at all! (No marking, no diagram at hand...but I do have two external USB...

I have a mobo that hasn't been used in a short while (2 months). I tried to boot it and all I get is a beep once per second. So what's going on?? I've discharged CMOS already and checked everything... Don't know what's wrong. Ben

Hi All, I've been having major problems with my AT7-MAX2 motherboard!! I've had this motherboard working fine fot the last 3 months but I just put a larger Power Supply as I was getting reboots now and then I assumed that the power supply I had couldn't cope! Changed the Power Supply and the case...

Almost certainly bad capacitors on the motherboard. Are they green and gold?? Check carefully to see if they are bulged or leaking, and if so - send the board to Homie for capacitor replacement. CC "¤ " wrote in message ... Hi...

Pretty sure you can get a parallel -to- USB adapter for the Epson (or generic) Then plug it into USB and it will probably work better. CC "Silent" wrote in message ... I have a KT7-Raid with a 850 MHz...

"XCSystems" wrote in message ... My friend started a website,XXXXXXX They sell computers and computer parts. I personally think their prices are pretty good, please take a look and give opinions so I can let my...

I am having some serious heat problems. Here is my setup: Abit IS7 Pentium 4 2.4C Geil PC4000 DDR 500 2x256Mb Geforce 2 MX400 32Mb Windows XP Professional Settings: FSB 240 (2880MHz for CPU)

I am running on OC'd NF7-S v2.0 and get the occasional stutter? Should I back off my FSB speed? Increase the chipset voltage? Any ideas?

Yuma, Please email it to - make sure you remove the NOSPAM portion of the address. Thanks, Jakov

I'm having weird lockups which I think may be as a result of using this... Any ideas? Thanks in advance...

Hi there! I managed to get my KT7A and a Palomino 2000+ to run fine, no problems so far :) Okay, except for this one: Sometimes, when I restart my OS, the board hangs in POST. After pressing the reset-button the system will boot fine. I know that my CPU isn't officially supported by ABIT so I can...

I have a SE6 V1 MB that has been running a 933 P3 ok, but not able to use a 1G P3, from the number on the Intel site the and the Abit latest bios this should not be a problem.. what am I missing. I tried this on a SE6 V2.1 MB too... with the same results... just dead on power up... Thanks.. Matt

Just upgraded to a XP2500 Barton 333fsb but not enough cash to upgrade the memory too (512mg PC2700 costs more than the cpu!) Anyone know the optimal settings on my ABIT KD7-RAID for this combination? So far I have the FSB at 133 and the multiplier to x14 (133x14 = 1862mzh), no other BIOS changes...