How do I enable powernow on the nf7-s?

Hi I would like to try to upgrade my computer bu replacing an old processor with a newer one (with HT). My current motherboard is ABIT BD7II-RAID (400/533). Currently the P4 1.7 GHz (400) no HT sits in there. I would like to upgrade it to P4 3,06 GHz (533), not 800 because my motherboard does not...

Hi, I have built a new system and am having a bad time getting BOTH (there are only two dimm slots) on this board to work. I have replaced the board once already. Both boards exhibit the same behaviour. It will only recognize ram in the first slot. If modules are placed in both the slots the...

I have a KV8-Max 3 w/ an Athlon 64 3200+ and an Asus V8420S GeForce 4 TI 4200 graphics card and I keep getting these random reboots. Sometimes they happen once every other day and sometimes they happen 3 times in a day. I can't figure out what the problem is. I ran through all the extensive...

Does anyone know what causes the memory test to continually loop? I can hit escape and it will skip the test, but if i don't its slower than normal and it will just cycle over and over. Any ideas? Athlon 2400+ Barton 2 x 512mb pc2100 Ram Geforce FX 5700LE 160GB Western Digital HD Sony CD...

Does anyone know what causes the memory test to continually loop? I can hit escape and it will skip the test, but if i don't its slower than normal and it will just cycle over and over. Any ideas? Athlon 2400+ Barton 2 x 512mb pc2100 Ram Geforce FX 5700LE 160GB Western Digital HD Sony CD...

Hello all, The clock is drifting on my KG7-RAID and I assume I have to replace the battery. I've seen most posts point out that this will probably mean losing my CMOS settings. Is this definitely the case (it doesn't seem to happen to everyone for some bizarre reason)? Are there any ways to dump...

Are there any drivers for the onboard nic card for Linux this is the only component that won't work when I install the os.

Hello, I have a problem with the above board, in that my Creative X-Fi Fatality is not recognized. Device manager states that the device is working correctly, add/remove shows all software installed, but in sound devices in control panel, it reports no sound playback or recording devices are...

I have two sticks of 256mb PC-150, one from MCI/MDT and the other from Corsair. The system only registers 384MB's upon system boot. That and the system reports 128mb sticks installed in banks 0/1/3. I already replaced the capacitors with high quality Panasonic caps.. So that isn't the...

Anyone have a problem with the SG-71 and P4 2.4Mhz (w/Hyperthreading)? Mine keeps booting up with 1.6Mhz. I tried using Clock Ratio "by SPD" but it still comes up wrong. Initially I had it in a ASUS P4C800 and it came up fine with the same memory in it. I recently upgraded the ASUS board and want...

Anyone know what the "DRAM Clock Ratio", "CPU Clock Ratio and the "CPU Clock" is supposed to be set at for the SG-71 with a Pentium IV 2.6c CPU? Thanks Charles

What is the fastest Athlon processor that I can put in this board and have stable operation?

I have a KT7A-Raid board, with a 1 GHz Athlon processor and 768 MB PC-133 RAM, running Win 98SE. I have run this board configured with Raid-0, but I'm now just using it without the Raid function.... but I do have 4 WD drives on it. The system has just recently started having a problem with locking...

I have a KT7A-RAID board that I know I've booted from a CD in the past. But suddenly, I can't find any setting that will allow me to do this. I have the BIOS set up with 1st boot: floppy 2nd boot: CD 3rd boot: ATA 100 But I've also tried other arrangements, such as 1st boot CD. I even tried all...

I need help finding a BRAND NEW IC7-MAX3 mobo. I know this mobo has been out of production for some time now but I like the features of the board. I like the 4 DDR slots and the 4 port SATA capabilities. I am looking to install a socket 478 3.4G P4 Extreme processor onto the board. I am not...

just purchased this mobo and i don't see anywhere in the documentation where the internal beeper gets connected. getting ready to power it up and would appreiciate any help.thanks. chocx

i just purchased a logioctech speaker system model x-530. 5.1 surround. connecting it to a kv8 pro 6-channel output. i can only get the front right,centre and rear left speakers to work.checked all the settings in the abit audio eq. all ok. checked properties for the audio devices...all set ok(5.1...

Hello, I have recently updated my computer and have decided to switch over to Linux from windows. Because I still have some win apps that I do not yet have Linux replacments for, I decided to keep my old computer running with windows on it. To save space and the money that would be required to buy...

Hi All, I've been having major problems with my AT7-MAX2 motherboard!! I've had this motherboard working fine fot the last 3 months but I just put a larger Power Supply as I was getting reboots now and then I assumed that the power supply I had couldn't cope! Changed the Power Supply and the case...