|
|
Could this be overclocking??? by
David Maynard
Uncle Vinnie wrote:
Thanks Dave... the odd thing is that I have the problems when I have 2 of
the 133's! If I have a 256-133 in the first slot and a 128-100 in the 2nd,
all works fine! I don't like to mix but this configuration is working... I
was thinking of asking the company to replace...
|
|
0 |
1,725 |
|
|
I really don't want to drive back up to North Houston! by
MD Vid
I wouldn't want to drive in Houston under any circumstances, either.
JTH
"Strontium" wrote in message
...
It's a bad CMOS chip. The board is going back. I've cleared CMOS, till
the
cows came home. Thanks for your input, anyway.
...
|
June 23rd 03 05:29 PM
by MD Vid
|
0 |
1,880 |
|
|
FSB/RAM MHz vs Low SDRAM Delays by
Rip Munsterman
Can anyone tell me which angle is the best to go when OCing? If I lower the
SDRAM delays and CAS latency to 4-2-2-2T, I can only overclock my FSB/memory
to 210MHz in the BIOS. If I want to increase FSB/memory to 217MHz, I have
to increase the SDRAM delays to 7-3-3-2T. Which should I be focused...
|
|
1 |
1,491 |
|
|
Multiplier question: bios or hardware... ??? by
Bougon
I own an old AOpen AX64 MoBo. I know a bios update can't give me a wider
range of possible FSB that Bios offers because these are the only ones
supported by the clock generator of my motherboard (ICWorks W144H).
But, is the clock multiplier a bios issue or is it related to hardware as
this is the...
|
June 24th 03 01:48 AM
by Bougon
|
2 |
2,146 |
|
|
Spanking new Cpu by
netreaper
Check this out , I ordered a retail P4 2.4c Cpu from NEWEGG on 06/18.
It arrived at my doorstep this morning , So I'm looking over the
package it says pack date 06/06/03 , That baby was only 12 days old when
NEWEGG packed it to mail to me.
Talk about a up to date inventory , I'm one happy...
|
|
2 |
2,247 |
|
|
CPU Temp Program by
Roger M
Kristopher wrote:
Does anyone know of a simple program which tells the CPU temperature in
Windows XP.
thanks,
Kristopher
|
|
3 |
1,735 |
|
|
watercooling + paste by
David Maynard
Halfgaar wrote:
David Maynard wrote:
I didn't have one either, till recently. I had always thought one would
be 'nice' but just never forked over for one. Now I can't imagine why I
waited so long.
I got my "rotary tool" from Sears during a sale but these people have an
inexpensive...
|
|
3 |
1,856 |
|
|
Overclocking software for a laptop? by
Tom Orle
wrote:
Hello,
Where can I download software to overclock a Pentium
166mhz CPU running on an old laptop (Toshiba Tecra 520CDT)
running Windows 98SE?
TIA
I'm not sure of what you ask - OC is a hardware issue. Like changing
|
June 25th 03 07:35 PM
by Markus
|
4 |
2,050 |
|
|
VCore undervoltage... is it harmful? by
Dave
Depends on the CPU. Some AMDs with "Power Now" use voltage reduction to
reduce power consumption for mobile use. While the CPU is in reduced power
mode it also clocks down (underclocks). Check out your CPU speed with the
reduced voltage, you CPU clock could have dropped with the voltage drop.
...
|
|
1 |
1,729 |
|
|
Lapping a P4? by
Tony Sivori
I have a P4 2.4B stepping SL6SH. I was shocked at how rough the heat
spreader is. I mean, it almost looks like it fell off the back of a truck,
and skidded along the road for a mile or two. :-)
The obvious solution is lapping. But I see that there is a small hole in the
heat spreader, and I'm...
( 1 2)
|
June 26th 03 01:32 PM
by SST
|
18 |
3,319 |
|
|
P4 fan mod link needed by
pete
Does anyone have a link for the stock Intel P4 fan mod that puts the fan on
high instead of variable?
Thanks,
Pete
|
June 26th 03 09:37 PM
by pete
|
3 |
1,837 |
|
|
|
|
1 |
1,807 |
|
|
OC P4 1,7GHz by
Tin
What was the highest speed you managed to oc P4 1,7GHz (crazy William core
:) )? I tried and it becomes unstable after 1,97GHz. MBO is MSI Sis645 Ultra
with 512MB Corsair DDR400. I heard they pushed it up to 2,4GHz...
|
|
1 |
1,462 |
|
|
Help! Cpu fan by
S.Heenan
"Fred Harnum" wrote in message
...
I'm looking for a good CPU heatsink and fan for a
P4 Socket 478
2.0a @ 2.8a
Whats good?
And where do i get one?
Thanks
|
|
0 |
1,711 |
|
|
DEll P4 3.06 Ghz system by
Faquin Kant
Is it at all possible to overclock this system at all..there doesn't seem to
be any options to overcloc within the BIOS....is there a BIOS update
somwhere that can unlock this bitch?
Thanks,
F.Kant
|
|
2 |
1,064 |
|
|
tech question for those w/533fsb mobos by
Rich
Anyone with a P4 board happen to notice what your agp and pci busses are
running at in DEFAULT settings?
My VIA P4MA PRO533 w/ Apollo P4M266A / VT8235 chipset supports 400/533 FSB
and defaults the agp and pci at 88MHz and 44MHz respectively...
My cpu is Intel 2.40b 533Mhz.
There are no adjustments...
|
|
5 |
1,337 |
|
|
|
June 28th 03 04:03 PM
by DEW
|
0 |
1,496 |
|
|
Great Product! Tt Spark 7 by
pete
Just installed one today on my P4 2.0. Using the manual control feature with
the fan turned down to its lowest position, the following obsversations with
stock HSF and then the Spark 7 were noted. Max load before the Spark 7 using
stock HSF temps went to 45c. To recover back to normal idle temp of...
|
June 29th 03 12:08 AM
by pete
|
0 |
999 |
|
|
Problems overclocking Aus P4C800 by
Erling Groes-Petersen
"Maveric" skrev i en meddelelse
...
Hi group,
I have run into some trouble overcloking my system. All components are new
and
are :
Asus P4C800 motherboard
Corsair XMS CMX512A-3200C2 (two sticks) DDR400 Cas2.0...
|
|
3 |
1,886 |
|
|
Curious about memory and FSB speeds by
NightSky 421
I have a 2.26GHz Pentium 4 (SL67Y Malaysia) on an Asus P4B533 motherboard
updated to the 1014 BIOS. I also have 512MB of Infineon PC-2100 CAS Latency
2 RAM (2x256) and have owned this combo for a little over a year now. I
noticed that my processor can overclock fairly well. However, one thing...
|
|
0 |
1,186 |