|
|
ATA 100 vs SATA II by
Dennis
- I have a WinXP system running on a 250gig ATA 100 drive.
- I got a new SATA II 250gig drive today. I need more storage.
- I'm trying to decide if I should reinstall WinXP onto the SATA drive
and start from scratch (alot of work).. or just throw the SATA drive in
the comp and leave XP running on...
( 1 2)
|
|
19 |
736 |
|
|
|
June 9th 06 09:40 PM
by hdrdtd
|
1 |
1,061 |
|
|
Power supply? Maybe? by
Randella
Hello all...
We have had a few power surges in the local area due to lighting. My
neighbor's computer now fails to start. It would boot for about 3
seconds and then loop out and stop.
I have replaced the motherboard and now the only thing that happens
when I try and turn it on is that the...
( 1 2)
|
|
16 |
468 |
|
|
RAID 1 remote diagnostic by
Fred H
I just built a file server (P4 MB w/RAID support, 1 x IDE boot drive, 2
x SATA data drives in a RAID 1 configuration). Haven't put an OS on yet
but the concept is that I'll have a wireless PCI card in the thing and
access it from my other computers. But how will I know if a drive goes
down? There's...
|
June 9th 06 05:17 PM
by hdrdtd
|
3 |
143 |
|
|
60 Sec Boot Time Normal?? by
Pedro Sanchez
I have amd venice 3200+ 64 bit cpu.
I timed it and it takes 60 seconds, from beep at bios to all things
loaded from msconfig/registry etc.
Older/previous computers I owned took 20-30 seconds.
So, is 60 seconds a reasonable amount of time?
|
|
6 |
289 |
|
|
|
|
0 |
398 |
|
|
Nobile Hard DriveM by
[email protected]
I had a 2-month old Seagate 60Gig 2.5" drive fail with multiple bad
sectors. Seagate says they will replace it with a refurbished drive,
and the owner doesn't want a refurb. If I have to buy a new drive,
what brand do you recommend?
Thanks
Phil
|
|
4 |
157 |
|
|
Is this video driver correct? by
TVeblen
I have an Asus branded Radeon 9800 Pro w/256 video card installed in one of
my boxes, loaded with the drivers and software that came in the retail box.
The OS is Windows XP Home Ed - SP2. Windows Update informed me of a driver
update for my card. I installed it. Everything works fine. But, the...
( 1 2)
|
|
16 |
842 |
|
|
|
|
3 |
463 |
|
|
Motorola V360v Bluetooth connection strugles to work with PC by
jonas
I have a Motorola V360v. Using Windows XP SP2. I also tested the
device with a Toshiba Bluetooth dongle and a Gigabyte Bluetooth
Dongle. With both they pair easily. But when it wants to install the
Bluetooth Modem, it keeps on searching and searching unable to find
anything. Each time I activated...
|
June 8th 06 10:32 PM
by jonas
|
0 |
191 |
|
|
Intel PD 950 3.4 GHZ DC - Voltage Estimate / Envelope Sought by
Agent_C
I’m planning on over-clocking an Intel PD 950 3.4GHz Dual Core
processor, on an Abit AW8 motherboard.
I’d be curious to know what the experienced over-clocker thinks might
be the envelope for this particular combo; but more specifically, how
much additional voltage I’ll need to get it to around 4...
|
|
8 |
418 |
|
|
Video not showing up during power on self test / boot by
Wiseman
Hi All,
I've just upgraded my video card from a Geforce MX 440 64MB to a Geforce
6200 256 MB. Things seem to be OK but I've noticed that before upgrading the
MX 440 would be mentioned during the boot but the 6200 isn't. Is this normal
or is there something to check ?
I should also mention that...
|
|
2 |
326 |
|
|
Help me clean up a miss applied cpu cooler by
Brian K
I have an AMD 64 3300+ that I'm putting into a Mach Speed K8M9MSR2 this
is a 754 socket. The heatsink fan is Masscool 5T313B1HG3G.
During the build process, I thought I had secured the Masscool cpu
cooler after applying the silicone thermal grease that shipped with
it. As I moved on to other...
( 1 2 3)
|
|
28 |
916 |
|
|
USB Header by
RP
I replaced a mother board in an emachine with a Tyan one. The USP header is
10 pin. The connector from the front usb ports of the emachine is 9 pin ie
10 with one blocked out. Can I drill out the blocked hole and connect it?
|
June 8th 06 02:54 AM
by RP
|
2 |
714 |
|
|
A new mother board by
jamey
I am planning on replacing my old motherboard. I am hoping to replace
it with a board that can support multiple P4HT processors. Has anyone
out there had any experience and know any good places to look for a
board or could even reccommend a board?
|
June 8th 06 02:39 AM
by Gank
|
3 |
573 |
|
|
Cannot boot from USB 2 HDD formatted with NTFS by
meagain
After much GOOGLE-ing and trying different things, it seems that I must use
some version of FAT instead of NTFS to make my USB 2.0 HDD bootable. Is this
true?
It's a 40GB Maxtor with XP-Home SP2 using NTFS.
And Asus A7N8X-X which supports booting from USB in BIOS but it just won't
work.
I bought...
( 1 2)
|
|
16 |
795 |
|
|
Transferring XP to SATA from IDE by
Wizzard
I have 2 IDEs, one has XP Pro on it. I installed a new SATA which,
thanks to guys here, is now working correctly.
I installed XP on the SATA drive. I then had a multi boot option to
log onto SATA or IDE. I then true imaged the original XP from IDE
drive to it.
Problem now is how to get rid of the...
|
June 8th 06 01:41 AM
by John
|
5 |
527 |
|
|
Beeps at Boot-up by
Matt
Hey guys. Got quite a serious problem here.
For some random reason, about 2 days ago my computer would not start
up. The computer would get as far as spinning up the hard drive and
fans (so we're talking the first few seconds after you press the power
ON button) then just as it is about to reach...
( 1 2)
|
June 7th 06 11:51 PM
by Matt
|
13 |
558 |
|
|
|
June 7th 06 09:24 PM
by UCLAN
|
2 |
352 |
|
|
M7NCG 400 No POST by
whetham63
All I get out of this mobo is a Beep every 5 seconds
No Post, No Video, CPU Fan Spins Hard Drive spins, CD Roms have power
Using AMD Sempron 3300
KByte PC3200 DDR400 512MB
I also tried and Athlon 1700 with Kingston DDR333 1GB with the same
result
|
|
2 |
166 |