|
|
How to install WinXP on a SATA Drive. by
Striker
I am building a new computer with a Gigabyte 8KNXP board. Could someone help
me
out with installing XP? I have a 120 Gig Western digital SATA drive. Is it
best to use the Sil3112 controller or the ICH5R? Should I use RAID or base
SATA?
Which connectors should I use for my DVD burner and my CDROM?...
( 1 2)
|
January 15th 04 10:06 PM
by Striker
|
12 |
489 |
|
|
8knxp - (OR anyone else) - sound blaster install? by
Mike Savad
i just got a soundblaster audigy 2 zs. i installed the hardware and it
isn't being recognized. the instructions are useless - these are the
steps i've done so far (none has worked, nothing see's the card, not even
the driver software):
unplugged the surround kit
removed the pin blocks
turned off...
|
|
9 |
563 |
|
|
Front USB connectors on 8KNXP mothereboard by
Striker
My case has the small individual wires with a plug on each one. The board
has one plug connectors. Has anyone figured out how to hook them up or do I
have to forget about the
front USB plugs on the case? I would sure like to be able to use them for my
MP3 player.
That way I can unhook it when I'm...
|
January 15th 04 09:10 PM
by mark7
|
3 |
588 |
|
|
|
|
2 |
325 |
|
|
Gigabyte 81PE1000 by
blackgold
hi fellow netters
What are your opinions regarding Gigabyte 81PE1000. Is it easy to set up
and
stable. If I use P4 2.6C what wattage PS would be needed. Assuming I use 2
HDD of 60GB 7200 rpm, and 1 CDD and 1 CDRW drive, sound card and video card.
Thanks.
|
|
3 |
182 |
|
|
CPU for 7VAXP-Ultra by
Tom & Susan
What is the fastest CPU this board will support? Iknow the manual says
XP2800, but I thought I have seen a few posts saying the XP3000 would
work...Thanks Tom
|
January 14th 04 02:19 PM
by jpsga
|
1 |
169 |
|
|
GA-6VXDC7 doesn't recognise Maxtor 80GB HDD in BIOS, but does in Windows by
yellow.elephant
I bought a Maxtor ATA 133 80GB hard disc to put in my GA-6VXDC7 run PC (with
two PIII 733 CPUs). When I run the bios to auto recognise / install the hard
disc the PC locks up and a reboot is the only way out. Using it as a slave
to my IBM 10.5GB hdd it shows as an identical size drive to the...
|
|
0 |
361 |
|
|
CPU for 7VAXP-Ultra by
Tom & Susan
What is the fastest CPU this board will support? I know the manual says
XP2800, but I thought I have seen a few posts saying the XP3000 would
work...Thanks Tom
|
|
0 |
237 |
|
|
ATA 133 round cable by
Striker
Can the above cable be used for DVD burner and CDROM. I didn't think the 80
wire cables would work with them. That is the same thing, right?
|
January 14th 04 09:59 AM
by One2Go
|
3 |
232 |
|
|
Gigabyte 8PE667 - Fan on Northbridge by
wayne
I cannot imagine that little fan is making enough to be heard over the case
fans?
Do a quick search on the newsgroups using google for answers.
Wayne
"Boudewijn" wrote in message
...
Hello,
|
|
2 |
417 |
|
|
7NNXP boot problems by
Chris Luther
Hi
Anyone got one of these 7NNXP boards.. I am having problems warm booting..
It doesnt.. it takes about 3 mins to POST whereas from a cold boot it takes
max 1min. Also when warm booting the system wont.. it will POST after some
time then will check every boot device and prompt with a message that...
|
|
2 |
511 |
|
|
Slow Video by
bonzo bedtime
Slow Video in Metal of Honor.
7VAXP + Geforce2 MX200 = 25 to 35 fps
7VAXP + GeforceFX 5200 = 45 to 65 fps
7N400 + GeforceFX 5200 = 15 to 25 fps
I upgraded my video card to an Asus FX5200 and noticed a speed
improvement. But since my motherboard only supported 4X AGP I wanted
to upgrade it. So I...
|
|
1 |
585 |
|
|
GA-7VAXP MIDI In Problem by
Ian James
I've got a GA-7VAXP based PC with 1GB RAM, ATI All-In-Wonder 7500, XP2500+
running Windows XP Pro (SP1a + all updates). Everything is running well
except....................
I installed Cubasis VST and connected a keyboard using the on-board sound
and MIDI. The problem is that MIDI in does not...
|
|
2 |
643 |
|
|
Can't turn on Num Lock !?! by
cooldude
I just built several systems with the GA-7VM400M-P motherboard. I have tried
to find the place in the bios to turn on "Num Lock" when the computer boots
up but can't seem to find it. Can anyone help??
Thanks in advance.
|
|
0 |
204 |
|
|
[GA-7VAX] Clock/FSB Settings? by
Jim Schuster
I have a GA-7VAX revision 1.1 board that I've recently upgraded to an
XP2800+ CPU, the fastest it supports. I misplaced the printed manual that
came with the board, so I downloaded the online manual
(manual_7vaxpu_e.pdf) from Gigabyte's website. Page 16 of the online
manual has a table that lists...
|
|
5 |
1,027 |
|
|
|
|
2 |
412 |
|
|
ga-8ipe1000 Win98 Hard disc drivers by
trimble bracegirdle
This gigabyte ga-8ipe1000 has "Intel 82801EB Ultra ATA Storage Controllers"
I can not find upto date best drivers for this any where on the Internet nor
on Gigabytes supplied CD.At the moment I am using the basic "Generic Ide
Driver" in WIN98. I feel the performance could be better. That is I can...
|
|
8 |
555 |
|
|
GA-7VA by
Leon
I have the Athlon 2200+. The only way I can get this system to boot is
to underclock the system from 1.8Ghz to 1.4 ghz. however the cpu runs
at 76c. Could this be the CPU dying or jusy a problem with the heat sink?
|
January 13th 04 01:31 AM
by Leon
|
0 |
180 |
|
|
|
|
2 |
484 |
|
|
GA-7VAX online manual incorrect by
Jim Schuster
I have a ga-7vax revision 1.1 board that I've recently upgraded to an
XP2800+ CPU, the fastest it supports. I misplaced the printed manual that
came with the board, so I downloaded the online manual
(manual_7vaxpu_e.pdf) from Gigabyte's website. Page 16 of the online
manual has a table that lists...
|
|
1 |
741 |