PDA

View Full Version : My video capture PAL settings keep resetting to NTSC every bootup using a MSI GeforceFX5900XT VTD128


NeonBlue
August 9th 04, 06:38 PM
hi all,

I've been racking my brain over this problem for months now and I've
searched and searched and still cannot fix this little problem I have....

the problem is this....

My WDM video capture PAL settings keep resetting themselves to NTSC on every
bootup and the only way I can reset it back to PAL is by messing about each
time and loading up the AMCAP.exe program first to set the format to PAL
before using VirtualDub cause if I don't do that first then I get the bottom
part of the captured video cut off and it looks plain wrong. I'm using a
MSI GeforceFX5900XT VTD128 card with VIVO drivers v1.0.8.0 (it says this in
the device manager for my "nVidia WDM Video Capture Universal" section)

The same thing happens with any WDM capture drivers I installed in the past
but I am assuming it's the nVidia card setting itself to a default of NTSC
each time but I need it to stay permanently set on PAL (which it doesn't
seem to want to do?)

Any help to enlighten me as to how to easily set this to PAL permanently
would be much appreciated :) thanks!

Granulated
August 9th 04, 10:05 PM
On Mon, 9 Aug 2004 18:38:58 +0100 "NeonBlue" > meeped
:

>hi all,
>
>I've been racking my brain over this problem for months now and I've
>searched and searched and still cannot fix this little problem I have....
>
>the problem is this....
>
>My WDM video capture PAL settings keep resetting themselves to NTSC on every
>bootup and the only way I can reset it back to PAL is by messing about each
>time and loading up the AMCAP.exe program first to set the format to PAL
>before using VirtualDub cause if I don't do that first then I get the bottom
>part of the captured video cut off and it looks plain wrong. I'm using a
>MSI GeforceFX5900XT VTD128 card with VIVO drivers v1.0.8.0 (it says this in
>the device manager for my "nVidia WDM Video Capture Universal" section)
>
>The same thing happens with any WDM capture drivers I installed in the past
>but I am assuming it's the nVidia card setting itself to a default of NTSC
>each time but I need it to stay permanently set on PAL (which it doesn't
>seem to want to do?)
>
>Any help to enlighten me as to how to easily set this to PAL permanently
>would be much appreciated :) thanks!
>

The 108's should be ok..they're the only ones Ive ever used that dont reset to
NTSC on reboot....although..thinking about it I might have edited the INF file..

open up the file NVCAP.INF

see what this bit says.... I think i changed it from AUTO...to PAL..and it works

###############################################

HKR,,VideoStandard,,PAL ; "NTSC", "PAL", "SECAM",
; "NTSC_433_50", "NTSC_433_60",
; "NTSC_N", "PAL_433_60", "PAL_N",
; "PAL_M", "AUTO"

################################################
--


) ___ ______
(__/_____) /) (, / )
/ __ _ (/ _ /---( __ _/_ _
/ (_(_/ (_(__/ )_(_(_ ) / ____)(_(_/ (_(__/_)_
(______) (_/ (

NeonBlue
August 10th 04, 01:08 AM
"Granulated" > wrote in message
...
> On Mon, 9 Aug 2004 18:38:58 +0100 "NeonBlue" >
> meeped
> :
>
>>hi all,
>>
>>I've been racking my brain over this problem for months now and I've
>>searched and searched and still cannot fix this little problem I have....
>>
>>the problem is this....
>>
>>My WDM video capture PAL settings keep resetting themselves to NTSC on
>>every
>>bootup and the only way I can reset it back to PAL is by messing about
>>each
>>time and loading up the AMCAP.exe program first to set the format to PAL
>>before using VirtualDub cause if I don't do that first then I get the
>>bottom
>>part of the captured video cut off and it looks plain wrong. I'm using a
>>MSI GeforceFX5900XT VTD128 card with VIVO drivers v1.0.8.0 (it says this
>>in
>>the device manager for my "nVidia WDM Video Capture Universal" section)
>>
>>The same thing happens with any WDM capture drivers I installed in the
>>past
>>but I am assuming it's the nVidia card setting itself to a default of NTSC
>>each time but I need it to stay permanently set on PAL (which it doesn't
>>seem to want to do?)
>>
>>Any help to enlighten me as to how to easily set this to PAL permanently
>>would be much appreciated :) thanks!
>>
>
> The 108's should be ok..they're the only ones Ive ever used that dont
> reset to
> NTSC on reboot....although..thinking about it I might have edited the INF
> file..
>
> open up the file NVCAP.INF
>
> see what this bit says.... I think i changed it from AUTO...to PAL..and it
> works
>
> ###############################################
>
> HKR,,VideoStandard,,PAL ; "NTSC", "PAL", "SECAM",
> ; "NTSC_433_50", "NTSC_433_60",
> ; "NTSC_N", "PAL_433_60", "PAL_N",
> ; "PAL_M", "AUTO"
>
> ################################################
> --
>
>
> ) ___ ______
> (__/_____) /) (, / )
> / __ _ (/ _ /---( __ _/_ _
> / (_(_/ (_(__/ )_(_(_ ) / ____)(_(_/ (_(__/_)_
> (______) (_/ (
>

thanks! I hadn't thought about that one! :) so I shall try that out right
now :) I'll post back to say how I got on....

NeonBlue
August 13th 04, 01:19 AM
"Granulated" > wrote in message
...
> On Mon, 9 Aug 2004 18:38:58 +0100 "NeonBlue" >
> meeped
> :
>
>>hi all,
>>
>>I've been racking my brain over this problem for months now and I've
>>searched and searched and still cannot fix this little problem I have....
>>
>>the problem is this....
>>
>>My WDM video capture PAL settings keep resetting themselves to NTSC on
>>every
>>bootup and the only way I can reset it back to PAL is by messing about
>>each
>>time and loading up the AMCAP.exe program first to set the format to PAL
>>before using VirtualDub cause if I don't do that first then I get the
>>bottom
>>part of the captured video cut off and it looks plain wrong. I'm using a
>>MSI GeforceFX5900XT VTD128 card with VIVO drivers v1.0.8.0 (it says this
>>in
>>the device manager for my "nVidia WDM Video Capture Universal" section)
>>
>>The same thing happens with any WDM capture drivers I installed in the
>>past
>>but I am assuming it's the nVidia card setting itself to a default of NTSC
>>each time but I need it to stay permanently set on PAL (which it doesn't
>>seem to want to do?)
>>
>>Any help to enlighten me as to how to easily set this to PAL permanently
>>would be much appreciated :) thanks!
>>
>
> The 108's should be ok..they're the only ones Ive ever used that dont
> reset to
> NTSC on reboot....although..thinking about it I might have edited the INF
> file..
>
> open up the file NVCAP.INF
>
> see what this bit says.... I think i changed it from AUTO...to PAL..and it
> works
>
> ###############################################
>
> HKR,,VideoStandard,,PAL ; "NTSC", "PAL", "SECAM",
> ; "NTSC_433_50", "NTSC_433_60",
> ; "NTSC_N", "PAL_433_60", "PAL_N",
> ; "PAL_M", "AUTO"
>
> ################################################

thanks for the help, I'm sure this must be the way to fix it as you said but
I'm still in the dark a bit as to which part to change and where? do I
change it in the windows/system folder or do I change it in the main place
where I extracted the drivers and then reinstall them?

I attempted to change it to the following but it still seems to get stuck on
NTSC anyway each bootup also there's some very dodgy looking large numbers
in the slider bars (in Virtualdub video source settings) for the saturation,
hue, brightness, etc so I think I messed it up with my tweaking somehow so I
will uninstall the drivers as best I can and reinstall them.
################################################## ##########
;---------------------------------------------------------------
; Decoder related values
; All values in the decoder key and subkeys are string values
;---------------------------------------------------------------
[nvcap.AddReg]
HKR,,DevLoader,,*NTKERN
HKR,,NTMPDriver,,nvcap.sys
HKR,,PhilComp,,VIN0 ; input sel for ext. tuner (philips) design
;HKR,,PhilTuner,,VIN0
HKR,,PhilSVideo,,VIN6
HKR,,AIOComp,,VIN3 ; input sel for all-in-1
;HKR,,AIOTuner,,VIN1
HKR,,AIOSVideo,,VIN6
HKR,,VPXComp,,VIN2 ; input sel for ext. tuner (micronas) design
;HKR,,VPXTuner,,VIN1
HKR,,VPXSVideo,,VIN3
HKR,,DefaultIn,,Comp
HKR,,ExtSwitch,,TRUE
HKR,,Manufacturer,,ASUS
HKR,,Address,,0x4a ; I2C address only important if
; VideoDecoder != AUTO
HKR,,InterfaceType,,D1 ; "D1" (8 bit) or "DMSD16" (16 bit)
HKR,,VideoDecoder,,AUTO ; "SAA7111", "SAA7111A", "SAA7112V0",
; "SAA7112", "SAA7113V0", "SAA7113",
; "SAA7113A", "SAA7114", "AUTO"
HKR,,VideoStandard,,PAL_I ; "NTSC", "PAL", "SECAM",
; "NTSC_433_50", "NTSC_433_60",
; "NTSC_N", "PAL_433_60", "PAL_N",
; "PAL_M", "AUTO"
HKR,,OutputFormat,,CCIR656 ; "YUV422", "YUV411", "YUV420",
; "YUV410", "YUV9", "RGB565",
; "RGB888", "CCIR656"
HKR,,VBIMode,,RAW ; "RAW", "BASEBAND" (optinal)
HKR,,VBILineWidth,,720 ; only needed if VBIMode used
HKR,,VBILineOffset,,0 ; only needed if VBIMode used
HKR,,EnableSlicer,,0 ; Enable slicer if it is present
HKR,,Oversample,,4 ; 4..Use Philips 27MHz Frequency
; 5..Use 5x for old Microsoft CC- & NABTS Codecs
################################################## ############
as you can see I rem'ed out a few TVTuner lines with semi-colons (as I don't
have a tuner on this card and it said to do that so it doesn't enumerate the
tuner on startup but it did anyway :-\ ) and I also changed the:

HKR,,VideoStandard,,NTSC ; "NTSC", "PAL", "SECAM",
; "NTSC_433_50", "NTSC_433_60",
; "NTSC_N", "PAL_433_60", "PAL_N",
; "PAL_M", "AUTO"

to this:

HKR,,VideoStandard,,PAL_I ; "NTSC", "PAL", "SECAM",
; "NTSC_433_50", "NTSC_433_60",
; "NTSC_N", "PAL_433_60", "PAL_N",
; "PAL_M", "AUTO"

as an added bonus it seems to also returns this error in
Virtualdub......Status 411: Warning no frames were captured, try turning
overlay off, reduce capture resolution or reducing colour depth to 16 or 24
bit....... but I am sure that this is related to the drivers as I have
captured video perfectly ok with this card before no probs and the only
thing I did recently was a reinstall of windows.

I'll keep trying to sort it out anyway and I'll post back if I manage to fix
it any and thanks again for your help :)

Granulated
August 17th 04, 02:08 PM
On Fri, 13 Aug 2004 01:19:39 +0100 "NeonBlue" >
meeped :

>"Granulated" > wrote in message
...
>> On Mon, 9 Aug 2004 18:38:58 +0100 "NeonBlue" >
>> meeped
>> :
>>
>>>hi all,
>>>
>>>I've been racking my brain over this problem for months now and I've
>>>searched and searched and still cannot fix this little problem I have....
>>>
>>>the problem is this....
>>>
>>>My WDM video capture PAL settings keep resetting themselves to NTSC on
>>>every
>>>bootup and the only way I can reset it back to PAL is by messing about
>>>each
>>>time and loading up the AMCAP.exe program first to set the format to PAL
>>>before using VirtualDub cause if I don't do that first then I get the
>>>bottom
>>>part of the captured video cut off and it looks plain wrong. I'm using a
>>>MSI GeforceFX5900XT VTD128 card with VIVO drivers v1.0.8.0 (it says this
>>>in
>>>the device manager for my "nVidia WDM Video Capture Universal" section)
>>>
>>>The same thing happens with any WDM capture drivers I installed in the
>>>past
>>>but I am assuming it's the nVidia card setting itself to a default of NTSC
>>>each time but I need it to stay permanently set on PAL (which it doesn't
>>>seem to want to do?)
>>>
>>>Any help to enlighten me as to how to easily set this to PAL permanently
>>>would be much appreciated :) thanks!
>>>
>>
>> The 108's should be ok..they're the only ones Ive ever used that dont
>> reset to
>> NTSC on reboot....although..thinking about it I might have edited the INF
>> file..
>>
>> open up the file NVCAP.INF
>>
>> see what this bit says.... I think i changed it from AUTO...to PAL..and it
>> works
>>
>> ###############################################
>>
>> HKR,,VideoStandard,,PAL ; "NTSC", "PAL", "SECAM",
>> ; "NTSC_433_50", "NTSC_433_60",
>> ; "NTSC_N", "PAL_433_60", "PAL_N",
>> ; "PAL_M", "AUTO"
>>
>> ################################################
>
>thanks for the help, I'm sure this must be the way to fix it as you said but
>I'm still in the dark a bit as to which part to change and where? do I
>change it in the windows/system folder or do I change it in the main place
>where I extracted the drivers and then reinstall them?
>
>I attempted to change it to the following but it still seems to get stuck on
>NTSC anyway each bootup also there's some very dodgy looking large numbers
>in the slider bars (in Virtualdub video source settings) for the saturation,
>hue, brightness, etc so I think I messed it up with my tweaking somehow so I
>will uninstall the drivers as best I can and reinstall them.
>################################################## ##########
>;---------------------------------------------------------------
>; Decoder related values
>; All values in the decoder key and subkeys are string values
>;---------------------------------------------------------------
>[nvcap.AddReg]
>HKR,,DevLoader,,*NTKERN
>HKR,,NTMPDriver,,nvcap.sys
>HKR,,PhilComp,,VIN0 ; input sel for ext. tuner (philips) design
>;HKR,,PhilTuner,,VIN0
>HKR,,PhilSVideo,,VIN6
>HKR,,AIOComp,,VIN3 ; input sel for all-in-1
>;HKR,,AIOTuner,,VIN1
>HKR,,AIOSVideo,,VIN6
>HKR,,VPXComp,,VIN2 ; input sel for ext. tuner (micronas) design
>;HKR,,VPXTuner,,VIN1
>HKR,,VPXSVideo,,VIN3
>HKR,,DefaultIn,,Comp
>HKR,,ExtSwitch,,TRUE
>HKR,,Manufacturer,,ASUS
>HKR,,Address,,0x4a ; I2C address only important if
> ; VideoDecoder != AUTO
>HKR,,InterfaceType,,D1 ; "D1" (8 bit) or "DMSD16" (16 bit)
>HKR,,VideoDecoder,,AUTO ; "SAA7111", "SAA7111A", "SAA7112V0",
> ; "SAA7112", "SAA7113V0", "SAA7113",
> ; "SAA7113A", "SAA7114", "AUTO"
>HKR,,VideoStandard,,PAL_I ; "NTSC", "PAL", "SECAM",
> ; "NTSC_433_50", "NTSC_433_60",
> ; "NTSC_N", "PAL_433_60", "PAL_N",
> ; "PAL_M", "AUTO"
>HKR,,OutputFormat,,CCIR656 ; "YUV422", "YUV411", "YUV420",
> ; "YUV410", "YUV9", "RGB565",
> ; "RGB888", "CCIR656"
>HKR,,VBIMode,,RAW ; "RAW", "BASEBAND" (optinal)
>HKR,,VBILineWidth,,720 ; only needed if VBIMode used
>HKR,,VBILineOffset,,0 ; only needed if VBIMode used
>HKR,,EnableSlicer,,0 ; Enable slicer if it is present
>HKR,,Oversample,,4 ; 4..Use Philips 27MHz Frequency
> ; 5..Use 5x for old Microsoft CC- & NABTS Codecs
>################################################## ############
>as you can see I rem'ed out a few TVTuner lines with semi-colons (as I don't
>have a tuner on this card and it said to do that so it doesn't enumerate the
>tuner on startup but it did anyway :-\ ) and I also changed the:
>
>HKR,,VideoStandard,,NTSC ; "NTSC", "PAL", "SECAM",
> ; "NTSC_433_50", "NTSC_433_60",
> ; "NTSC_N", "PAL_433_60", "PAL_N",
> ; "PAL_M", "AUTO"
>
>to this:
>
>HKR,,VideoStandard,,PAL_I ; "NTSC", "PAL", "SECAM",
> ; "NTSC_433_50", "NTSC_433_60",
> ; "NTSC_N", "PAL_433_60", "PAL_N",
> ; "PAL_M", "AUTO"
>
>as an added bonus it seems to also returns this error in
>Virtualdub......Status 411: Warning no frames were captured, try turning
>overlay off, reduce capture resolution or reducing colour depth to 16 or 24
>bit....... but I am sure that this is related to the drivers as I have
>captured video perfectly ok with this card before no probs and the only
>thing I did recently was a reinstall of windows.
>
>I'll keep trying to sort it out anyway and I'll post back if I manage to fix
>it any and thanks again for your help :)
>
>


ok between the hashes is a complete COPY of my INF file..... HTH
################################################## ################

; nvcap.INF -- This file installs nvcap.sys
;
; Created 11.Nov.97 (Creation Date)
; Updated 16.Dec.97
; Updated 16.Mar.98
; Updated 17.Jun.98
; Updated 01.Okt.98
; Updated Jun21,2000 Cheehoi
; Updated 2-6-2001 Customization for Ext Tuner Box

[Version]
signature="$CHICAGO$"
Class=MEDIA
ClassGUID={4d36e96c-e325-11ce-bfc1-08002be10318}
Provider=%MS%
LayoutFile=LAYOUT.INF, layout1.inf, layout2.inf
DriverVer = 11/16/2001, 1.0.8
;CatalogFile=NVCAP.CAT

[DestinationDirs]
nvcap.CopyDrivers=10,system32\drivers ; eg. \windows\system32\drivers
nvcap.CopyCodec=11

[SourceDisksNames]
1=%Disk1Name%,,,%10%

[SourceDisksFiles]
nvcap.sys=1,system32\drivers

[Manufacturer]
%MS%=MS

[MS]
%nvcap.DeviceDesc%=nvcap.Device,DISPLAY\nvcap
;------------------------------------------------------------------------------->>>>>

[nvcap.Device]
Include = ks.inf, kscaptur.inf, ksfilter.inf
Needs= KS.Registration,KSCAPTUR.Registration,MSPCLOCK.Ins tallation
AddReg = nvcap.AddReg
UpdateInis= nvcap.UpdateIni
CopyFiles= nvcap.CopyDrivers, nvcap.CopyCodec
DelFiles = nvcap.DelDrivers
KnownFiles= nvcap.KnownFiles

[nvcap.Device.NT]
Include = ks.inf, kscaptur.inf, ksfilter.inf
Needs= KS.Registration,KSCAPTUR.Registration.NT,MSPCLOCK. Installation
AddReg = nvcap.AddReg
UpdateInis= nvcap.UpdateIni
CopyFiles= nvcap.CopyDrivers, nvcap.CopyCodec
DelFiles = nvcap.DelDrivers


[nvcap.CopyDrivers]
;nvcap.sys
stream.sys

[nvcap.CopyCodec]
msyuv.dll

[nvcap.UpdateIni]
system.ini, drivers32,,"VIDC.UYVY=msyuv.dll"

[nvcap.KnownFiles]
nvcap.sys=safe

[nvcap.DelDrivers]


;---------------------------------------------------------------
; Decoder related values
; All values in the decoder key and subkeys are string values
;---------------------------------------------------------------
[nvcap.AddReg]
HKR,,DevLoader,,*NTKERN
HKR,,NTMPDriver,,nvcap.sys

;/////////////nVidia Customizations//////////////////////////////
;
; Please read this !!!!!!!!!!!!!!!!!!!!!!!!!!
; Is video input does not switch correctly or
; audio doesn't mute, most probably the settings here are
; incorrect.
;
; 1)If an input source(PhilComp, PhilTuner etc) is removed,
; it won't be enumerated by the capture driver.
; Ex. If you do not want TUNER support for the All-in-one design
; remove "HKR,,AIOTuner,,VINX" key and Tuner input won't be
; enumerated.
;
;////////////////////////////////////////////////////////////////
;----Customization for external tuner box-----------------------
; This is the translucent green box
;---------------------------------------------------------------
HKR,,PhilComp,,VIN0 ; input sel for ext. tuner (philips) design
HKR,,PhilTuner,,VIN0
HKR,,PhilSVideo,,VIN6

;----Customization for the ALL-In-One design--------------------
HKR,,AIOComp,,VIN0 ; input sel for all-in-1
HKR,,AIOSVideo,,VIN6

;----Customization for the Micronas VPX chipsets----------------
HKR,,VPXComp,,VIN2 ; input sel for ext. tuner (micronas) design
HKR,,VPXTuner,,VIN1
HKR,,VPXSVideo,,VIN3

HKR,,DefaultIn,,Comp
HKR,,ExtSwitch,,FALSE
HKR,,Manufacturer,,

;---------------------------------------------------------------
; Subkey for VidComp
; 8574=W/46/ff
; 8575=W/46/ff/3
;---------------------------------------------------------------
HKR,VidComp,NumCmd,,1
HKR,VidComp,Cmd0,,W/46/ff

;---------------------------------------------------------------
; Subkey for VidSVid
; 8574=W/46/bf
; 8575=W/46/ff/2
;---------------------------------------------------------------
HKR,VidSVid,NumCmd,,1
HKR,VidSVid,Cmd0,,W/46/bf

;---------------------------------------------------------------
; Subkey for VidTuner
; 8574=W/46/7f
; 8575=W/46/ff/1
;---------------------------------------------------------------
HKR,VidTuner,NumCmd,,1
HKR,VidTuner,Cmd0,,W/46/7f

;---------------------------------------------------------------
; Subkey for AudTuner
;---------------------------------------------------------------
HKR,AudTuner,NumCmd,,0

;---------------------------------------------------------------
; Subkey for AudLineIn
;---------------------------------------------------------------
HKR,AudLineIn,NumCmd,,0

;---------------------------------------------------------------
; Subkey for AudMute
; 9850 = W/b6/6/18
; 9874 = W/b0/12/ff
; 9873 = W/b4/0/40
;---------------------------------------------------------------
HKR,AudMute,NumCmd,,0
;HKR,AudMute,Cmd0,,W/b6/6/18

;---------------------------------------------------------------
; Subkey for AudUnMute
; 9850 = W/b6/6/40
; 9874 = W/b0/12/fb
; 9873 = W/b4/0/90
;---------------------------------------------------------------
HKR,AudUnMute,NumCmd,,0
;HKR,AudUnMute,Cmd0,,W/b6/6/40

;---------------------------------------------------------------
; Subkey for board customization
;---------------------------------------------------------------
HKR,Custom,NumCmd,,1
HKR,Custom,Cmd0,,W/46/3f

;///////////End of nVidia Customization//////////////////////////

;////////////////Philips HAL customization///////////////////////

HKR,,Address,,0x4a ; I2C address only important if
; VideoDecoder != AUTO
HKR,,InterfaceType,,D1 ; "D1" (8 bit) or "DMSD16" (16 bit)
HKR,,VideoDecoder,,AUTO ; "SAA7111", "SAA7111A", "SAA7112V0",
; "SAA7112", "SAA7113V0", "SAA7113",
; "SAA7113A", "SAA7114", "AUTO"
HKR,,VideoStandard,,PAL ; "NTSC", "PAL", "SECAM",
; "NTSC_433_50", "NTSC_433_60",
; "NTSC_N", "PAL_433_60", "PAL_N",
; "PAL_M", "AUTO"
HKR,,OutputFormat,,CCIR656 ; "YUV422", "YUV411", "YUV420",
; "YUV410", "YUV9", "RGB565",
; "RGB888", "CCIR656"
HKR,,VBIMode,,RAW ; "RAW", "BASEBAND" (optinal)
HKR,,VBILineWidth,,720 ; only needed if VBIMode used
HKR,,VBILineOffset,,0 ; only needed if VBIMode used
HKR,,EnableSlicer,,0 ; Enable slicer if it is present
HKR,,Oversample,,4 ; 4..Use Philips 27MHz Frequency
; 5..Use 5x for old Microsoft CC- & NABTS Codecs

;---------------------------------------------------------------
; Subkey for video source 1
;---------------------------------------------------------------
HKR,VidSrc1,InputMode,,0
HKR,VidSrc1,SourceType,,VCR
HKR,VidSrc1,VideoType,,Composite
HKR,VidSrc1,ScalerFID,,DEFAULT
HKR,VidSrc1,ScalerMode,,DEFAULT

;---------------------------------------------------------------
; Subkey for video source 2
;---------------------------------------------------------------
HKR,VidSrc2,InputMode,,0
HKR,VidSrc2,SourceType,,TV
HKR,VidSrc2,VideoType,,Tuner
HKR,VidSrc2,ScalerFID,,DEFAULT
HKR,VidSrc2,ScalerMode,,DEFAULT

;---------------------------------------------------------------
; Subkey for video source 3
;---------------------------------------------------------------
HKR,VidSrc3,InputMode,,6
HKR,VidSrc3,SourceType,,VCR
HKR,VidSrc3,VideoType,,SVHS
HKR,VidSrc3,ScalerFID,,DEFAULT
HKR,VidSrc3,ScalerMode,,DEFAULT

;---------------------------------------------------------------
; Subkey Description for video sources (optional)
;---------------------------------------------------------------
; Subkeyname : "VidSrcX" -> X = number of input
; InputMode : Decoder input mode for video source ("0" to "9")
; SourceType : "Camera", "TV", "VCR"
; VideoType : "Tuner", "Composite", "SVHS", "Extern_1"
; ScalerFID : "DEFAULT", "INVERT" (optional)
; ScalerMode : "DEFAULT", "HIGH_BANDWIDTH", "LOW_BANDWIDTH" (optional)

;---------------------------------------------------------------
; Subkey Description for teletext sources (optional)
;---------------------------------------------------------------
; Subkeyname : "TelSrcX" -> X = number of input
; InputType : "INTERNAL", ""EXTERNAL_1"

;---------------------------------------------------------------
; Subkey example for teletext source (optional)
;---------------------------------------------------------------
; HKR,TelSrc1,InputType,,INTERNAL

;---------------------------------------------------------------
; Subkey Description for default values (optional)
;---------------------------------------------------------------
; Subkeyname: "DefaultSaa7111" for defaults of Saa7111
; "DefaultSaa7111A" for defaults of Saa7111A
; "DefaultSaa7112V0" for defaults of Saa7112V0
; "DefaultSaa7112" for defaults of Saa7112
; "DefaultSaa7113V0" for defaults of Saa7113V0
; "DefaultSaa7113" for defaults of Saa7113
; "DefaultSaa7113A" for defaults of Saa7113A
; "DefaultSaa7114" for defaults of Saa7114
; Reg0xXXX : Value of register 0xXXX (hex) overwriting the
; value in the hardcoded default array. The register
; number in the key must be hex with leading 0x and
; must contain 3 digits!

;---------------------------------------------------------------
; Subkey for default values for the Saa7113
; The hardcoded default value 0x82 of register 0x40 is replaced
; with 0x02 which is necessary for PAL
;---------------------------------------------------------------
HKR,DefaultSaa7113,Reg0x040,,0x02
HKR,DefaultSaa7113V0,Reg0x040,,0x02

;---------------------------------------------------------------
; Subkey for default values for the Saa7114
; The hardcoded default value 0x00 of register 0x80 is replaced
; with 0x10 which is necessary for NTSC sliced data interface
;---------------------------------------------------------------
;HKR,DefaultSaa7114,Reg0x080,,0x40 ;only when EnableSlicer=1 !!!

;/////////////////End of Philips HAL customization//////////////

[nvcap.Device.Interfaces]
AddInterface={65e8773d-8f56-11d0-a3b9-00a0c9223196},"GLOBAL",VideoCapture,
AddInterface={a799a801-a46d-11d0-a18c-00a02401dcd4},"GLOBAL",VideoCrossbar,

[nvcap.Device.NT.Interfaces]
AddInterface={65e8773d-8f56-11d0-a3b9-00a0c9223196},"GLOBAL",VideoCapture,
AddInterface={a799a801-a46d-11d0-a18c-00a02401dcd4},"GLOBAL",VideoCrossbar,

[VideoCapture]
AddReg=VideoCapture.AddReg

[VideoCrossbar]
AddReg=VideoXBar.AddReg

[VideoCapture.AddReg]
HKR,,CLSID,,{17CCA71B-ECD7-11D0-B908-00A0C9223196}
HKR,,FriendlyName,,%nvcap.Capture%
HKR,,PageOutWhenUnopened,1,01
HKR,,DontSuspendIfStreamsAreRunning,1,01

[VideoXBar.AddReg]
HKR,,CLSID,,{71F96460-78F3-11d0-A18C-00A0C9118956}
HKR,,FriendlyName,,%nvcap.Crossbar%

[nvcap.Device.NT.Services]
AddService = nvcap,0x00000002,nvcap.ServiceInstall

[nvcap.ServiceInstall]
DisplayName = %nvcap.DeviceDesc%
ServiceType = %SERVICE_KERNEL_DRIVER%
StartType = %SERVICE_AUTO_START%
ErrorControl = %SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\nvcap.sys

;---------------------------------------------------------------
; S t r i n g s
;---------------------------------------------------------------

[Strings]
;----------------
; Non-Localizable
;----------------

SERVICE_KERNEL_DRIVER=1
SERVICE_AUTO_START=2
SERVICE_ERROR_NORMAL=1

;----------------
; Localizable
;----------------
Msft = "nVidia Corporation"
MS = "nVidia"
captureClassName = "Sound, video and game controllers"
nvcap.DeviceDesc = "nVidia WDM Video Capture (universal)"
nvcap.Capture = "nVidia WDM Video Capture (universal)"
nvcap.Crossbar = "nVidia WDM Video Crossbar (universal)"
Disk1Name = "nVidia WDM Drivers Disk 1"

################################################## #######################################
--


) ___ ______
(__/_____) /) (, / )
/ __ _ (/ _ /---( __ _/_ _
/ (_(_/ (_(__/ )_(_(_ ) / ____)(_(_/ (_(__/_)_
(______) (_/ (

Granulated
August 17th 04, 02:10 PM
On Fri, 13 Aug 2004 01:19:39 +0100 "NeonBlue" >
meeped :

>HKR,,VideoStandard,,PAL_I ; "NTSC", "PAL", "SECAM",
> ; "NTSC_433_50", "NTSC_433_60",
> ; "NTSC_N", "PAL_433_60", "PAL_N",
> ; "PAL_M", "AUTO"


WHy did you put PAL_I ? it's not even in the list !
I
--


) ___ ______
(__/_____) /) (, / )
/ __ _ (/ _ /---( __ _/_ _
/ (_(_/ (_(__/ )_(_(_ ) / ____)(_(_/ (_(__/_)_
(______) (_/ (

NeonBlue
August 17th 04, 09:47 PM
I used PAL_I as that is the one which seems to work for me when I select it
in AMCAP's video format (it then displays it as being 625 lines and not
NTSC_M as it always seems to default to. I did, as you say, realise it
wasn't in the list and have tried it with PAL too now and it still seems not
to allow it to be set to PAL and just keeps constantly reverting to NTSC_M
mode each bootup. I used regedit to search for the word "VideoStandard" in
the registry and I found where it said PAL_I and I have changed it to PAL
now so I will reboot again and see if it works this time and repost if it
does or not :) thanks for the help :)

"Granulated" > wrote in message
...
> On Fri, 13 Aug 2004 01:19:39 +0100 "NeonBlue" >
> meeped :
>
>>HKR,,VideoStandard,,PAL_I ; "NTSC", "PAL", "SECAM",
>> ; "NTSC_433_50", "NTSC_433_60",
>> ; "NTSC_N", "PAL_433_60", "PAL_N",
>> ; "PAL_M", "AUTO"
>
>
> WHy did you put PAL_I ? it's not even in the list !
> I
> --
>
>
> ) ___ ______
> (__/_____) /) (, / )
> / __ _ (/ _ /---( __ _/_ _
> / (_(_/ (_(__/ )_(_(_ ) / ____)(_(_/ (_(__/_)_
> (______) (_/ (
>

NeonBlue
August 17th 04, 09:51 PM
"Granulated" > wrote in message
...
> On Fri, 13 Aug 2004 01:19:39 +0100 "NeonBlue" >
> meeped :
>
>>"Granulated" > wrote in message
...
>>> On Mon, 9 Aug 2004 18:38:58 +0100 "NeonBlue"
>>> >
>>> meeped
>>> :
>>>
>>>>hi all,
>>>>
>>>>I've been racking my brain over this problem for months now and I've
>>>>searched and searched and still cannot fix this little problem I
>>>>have....
>>>>
>>>>the problem is this....
>>>>
>>>>My WDM video capture PAL settings keep resetting themselves to NTSC on
>>>>every
>>>>bootup and the only way I can reset it back to PAL is by messing about
>>>>each
>>>>time and loading up the AMCAP.exe program first to set the format to PAL
>>>>before using VirtualDub cause if I don't do that first then I get the
>>>>bottom
>>>>part of the captured video cut off and it looks plain wrong. I'm using
>>>>a
>>>>MSI GeforceFX5900XT VTD128 card with VIVO drivers v1.0.8.0 (it says this
>>>>in
>>>>the device manager for my "nVidia WDM Video Capture Universal" section)
>>>>
>>>>The same thing happens with any WDM capture drivers I installed in the
>>>>past
>>>>but I am assuming it's the nVidia card setting itself to a default of
>>>>NTSC
>>>>each time but I need it to stay permanently set on PAL (which it doesn't
>>>>seem to want to do?)
>>>>
>>>>Any help to enlighten me as to how to easily set this to PAL permanently
>>>>would be much appreciated :) thanks!
>>>>
>>>
>>> The 108's should be ok..they're the only ones Ive ever used that dont
>>> reset to
>>> NTSC on reboot....although..thinking about it I might have edited the
>>> INF
>>> file..
>>>
>>> open up the file NVCAP.INF
>>>
>>> see what this bit says.... I think i changed it from AUTO...to PAL..and
>>> it
>>> works
>>>
>>> ###############################################
>>>
>>> HKR,,VideoStandard,,PAL ; "NTSC", "PAL", "SECAM",
>>> ; "NTSC_433_50", "NTSC_433_60",
>>> ; "NTSC_N", "PAL_433_60", "PAL_N",
>>> ; "PAL_M", "AUTO"
>>>
>>> ################################################
>>
>>thanks for the help, I'm sure this must be the way to fix it as you said
>>but
>>I'm still in the dark a bit as to which part to change and where? do I
>>change it in the windows/system folder or do I change it in the main place
>>where I extracted the drivers and then reinstall them?
>>
>>I attempted to change it to the following but it still seems to get stuck
>>on
>>NTSC anyway each bootup also there's some very dodgy looking large
>>numbers
>>in the slider bars (in Virtualdub video source settings) for the
>>saturation,
>>hue, brightness, etc so I think I messed it up with my tweaking somehow so
>>I
>>will uninstall the drivers as best I can and reinstall them.
>>################################################## ##########
>>;---------------------------------------------------------------
>>; Decoder related values
>>; All values in the decoder key and subkeys are string values
>>;---------------------------------------------------------------
>>[nvcap.AddReg]
>>HKR,,DevLoader,,*NTKERN
>>HKR,,NTMPDriver,,nvcap.sys
>>HKR,,PhilComp,,VIN0 ; input sel for ext. tuner (philips) design
>>;HKR,,PhilTuner,,VIN0
>>HKR,,PhilSVideo,,VIN6
>>HKR,,AIOComp,,VIN3 ; input sel for all-in-1
>>;HKR,,AIOTuner,,VIN1
>>HKR,,AIOSVideo,,VIN6
>>HKR,,VPXComp,,VIN2 ; input sel for ext. tuner (micronas) design
>>;HKR,,VPXTuner,,VIN1
>>HKR,,VPXSVideo,,VIN3
>>HKR,,DefaultIn,,Comp
>>HKR,,ExtSwitch,,TRUE
>>HKR,,Manufacturer,,ASUS
>>HKR,,Address,,0x4a ; I2C address only important if
>> ; VideoDecoder != AUTO
>>HKR,,InterfaceType,,D1 ; "D1" (8 bit) or "DMSD16" (16 bit)
>>HKR,,VideoDecoder,,AUTO ; "SAA7111", "SAA7111A", "SAA7112V0",
>> ; "SAA7112", "SAA7113V0", "SAA7113",
>> ; "SAA7113A", "SAA7114", "AUTO"
>>HKR,,VideoStandard,,PAL_I ; "NTSC", "PAL", "SECAM",
>> ; "NTSC_433_50", "NTSC_433_60",
>> ; "NTSC_N", "PAL_433_60", "PAL_N",
>> ; "PAL_M", "AUTO"
>>HKR,,OutputFormat,,CCIR656 ; "YUV422", "YUV411", "YUV420",
>> ; "YUV410", "YUV9", "RGB565",
>> ; "RGB888", "CCIR656"
>>HKR,,VBIMode,,RAW ; "RAW", "BASEBAND" (optinal)
>>HKR,,VBILineWidth,,720 ; only needed if VBIMode used
>>HKR,,VBILineOffset,,0 ; only needed if VBIMode used
>>HKR,,EnableSlicer,,0 ; Enable slicer if it is present
>>HKR,,Oversample,,4 ; 4..Use Philips 27MHz Frequency
>> ; 5..Use 5x for old Microsoft CC- & NABTS
>> Codecs
>>################################################## ############
>>as you can see I rem'ed out a few TVTuner lines with semi-colons (as I
>>don't
>>have a tuner on this card and it said to do that so it doesn't enumerate
>>the
>>tuner on startup but it did anyway :-\ ) and I also changed the:
>>
>>HKR,,VideoStandard,,NTSC ; "NTSC", "PAL", "SECAM",
>> ; "NTSC_433_50", "NTSC_433_60",
>> ; "NTSC_N", "PAL_433_60", "PAL_N",
>> ; "PAL_M", "AUTO"
>>
>>to this:
>>
>>HKR,,VideoStandard,,PAL_I ; "NTSC", "PAL", "SECAM",
>> ; "NTSC_433_50", "NTSC_433_60",
>> ; "NTSC_N", "PAL_433_60", "PAL_N",
>> ; "PAL_M", "AUTO"
>>
>>as an added bonus it seems to also returns this error in
>>Virtualdub......Status 411: Warning no frames were captured, try turning
>>overlay off, reduce capture resolution or reducing colour depth to 16 or
>>24
>>bit....... but I am sure that this is related to the drivers as I have
>>captured video perfectly ok with this card before no probs and the only
>>thing I did recently was a reinstall of windows.
>>
>>I'll keep trying to sort it out anyway and I'll post back if I manage to
>>fix
>>it any and thanks again for your help :)
>>
>>
>
>
> ok between the hashes is a complete COPY of my INF file..... HTH
> ################################################## ################
>
> ; nvcap.INF -- This file installs nvcap.sys
> ;
> ; Created 11.Nov.97 (Creation Date)
> ; Updated 16.Dec.97
> ; Updated 16.Mar.98
> ; Updated 17.Jun.98
> ; Updated 01.Okt.98
> ; Updated Jun21,2000 Cheehoi
> ; Updated 2-6-2001 Customization for Ext Tuner Box
>
> [Version]
> signature="$CHICAGO$"
> Class=MEDIA
> ClassGUID={4d36e96c-e325-11ce-bfc1-08002be10318}
> Provider=%MS%
> LayoutFile=LAYOUT.INF, layout1.inf, layout2.inf
> DriverVer = 11/16/2001, 1.0.8
> ;CatalogFile=NVCAP.CAT
>
> [DestinationDirs]
> nvcap.CopyDrivers=10,system32\drivers ; eg. \windows\system32\drivers
> nvcap.CopyCodec=11
>
> [SourceDisksNames]
> 1=%Disk1Name%,,,%10%
>
> [SourceDisksFiles]
> nvcap.sys=1,system32\drivers
>
> [Manufacturer]
> %MS%=MS
>
> [MS]
> %nvcap.DeviceDesc%=nvcap.Device,DISPLAY\nvcap
> ;------------------------------------------------------------------------------->>>>>
>
> [nvcap.Device]
> Include = ks.inf, kscaptur.inf, ksfilter.inf
> Needs= KS.Registration,KSCAPTUR.Registration,MSPCLOCK.Ins tallation
> AddReg = nvcap.AddReg
> UpdateInis= nvcap.UpdateIni
> CopyFiles= nvcap.CopyDrivers, nvcap.CopyCodec
> DelFiles = nvcap.DelDrivers
> KnownFiles= nvcap.KnownFiles
>
> [nvcap.Device.NT]
> Include = ks.inf, kscaptur.inf, ksfilter.inf
> Needs= KS.Registration,KSCAPTUR.Registration.NT,MSPCLOCK. Installation
> AddReg = nvcap.AddReg
> UpdateInis= nvcap.UpdateIni
> CopyFiles= nvcap.CopyDrivers, nvcap.CopyCodec
> DelFiles = nvcap.DelDrivers
>
>
> [nvcap.CopyDrivers]
> ;nvcap.sys
> stream.sys
>
> [nvcap.CopyCodec]
> msyuv.dll
>
> [nvcap.UpdateIni]
> system.ini, drivers32,,"VIDC.UYVY=msyuv.dll"
>
> [nvcap.KnownFiles]
> nvcap.sys=safe
>
> [nvcap.DelDrivers]
>
>
> ;---------------------------------------------------------------
> ; Decoder related values
> ; All values in the decoder key and subkeys are string values
> ;---------------------------------------------------------------
> [nvcap.AddReg]
> HKR,,DevLoader,,*NTKERN
> HKR,,NTMPDriver,,nvcap.sys
>
> ;/////////////nVidia Customizations//////////////////////////////
> ;
> ; Please read this !!!!!!!!!!!!!!!!!!!!!!!!!!
> ; Is video input does not switch correctly or
> ; audio doesn't mute, most probably the settings here are
> ; incorrect.
> ;
> ; 1)If an input source(PhilComp, PhilTuner etc) is removed,
> ; it won't be enumerated by the capture driver.
> ; Ex. If you do not want TUNER support for the All-in-one design
> ; remove "HKR,,AIOTuner,,VINX" key and Tuner input won't be
> ; enumerated.
> ;
> ;////////////////////////////////////////////////////////////////
> ;----Customization for external tuner box-----------------------
> ; This is the translucent green box
> ;---------------------------------------------------------------
> HKR,,PhilComp,,VIN0 ; input sel for ext. tuner (philips) design
> HKR,,PhilTuner,,VIN0
> HKR,,PhilSVideo,,VIN6
>
> ;----Customization for the ALL-In-One design--------------------
> HKR,,AIOComp,,VIN0 ; input sel for all-in-1
> HKR,,AIOSVideo,,VIN6
>
> ;----Customization for the Micronas VPX chipsets----------------
> HKR,,VPXComp,,VIN2 ; input sel for ext. tuner (micronas) design
> HKR,,VPXTuner,,VIN1
> HKR,,VPXSVideo,,VIN3
>
> HKR,,DefaultIn,,Comp
> HKR,,ExtSwitch,,FALSE
> HKR,,Manufacturer,,
>
> ;---------------------------------------------------------------
> ; Subkey for VidComp
> ; 8574=W/46/ff
> ; 8575=W/46/ff/3
> ;---------------------------------------------------------------
> HKR,VidComp,NumCmd,,1
> HKR,VidComp,Cmd0,,W/46/ff
>
> ;---------------------------------------------------------------
> ; Subkey for VidSVid
> ; 8574=W/46/bf
> ; 8575=W/46/ff/2
> ;---------------------------------------------------------------
> HKR,VidSVid,NumCmd,,1
> HKR,VidSVid,Cmd0,,W/46/bf
>
> ;---------------------------------------------------------------
> ; Subkey for VidTuner
> ; 8574=W/46/7f
> ; 8575=W/46/ff/1
> ;---------------------------------------------------------------
> HKR,VidTuner,NumCmd,,1
> HKR,VidTuner,Cmd0,,W/46/7f
>
> ;---------------------------------------------------------------
> ; Subkey for AudTuner
> ;---------------------------------------------------------------
> HKR,AudTuner,NumCmd,,0
>
> ;---------------------------------------------------------------
> ; Subkey for AudLineIn
> ;---------------------------------------------------------------
> HKR,AudLineIn,NumCmd,,0
>
> ;---------------------------------------------------------------
> ; Subkey for AudMute
> ; 9850 = W/b6/6/18
> ; 9874 = W/b0/12/ff
> ; 9873 = W/b4/0/40
> ;---------------------------------------------------------------
> HKR,AudMute,NumCmd,,0
> ;HKR,AudMute,Cmd0,,W/b6/6/18
>
> ;---------------------------------------------------------------
> ; Subkey for AudUnMute
> ; 9850 = W/b6/6/40
> ; 9874 = W/b0/12/fb
> ; 9873 = W/b4/0/90
> ;---------------------------------------------------------------
> HKR,AudUnMute,NumCmd,,0
> ;HKR,AudUnMute,Cmd0,,W/b6/6/40
>
> ;---------------------------------------------------------------
> ; Subkey for board customization
> ;---------------------------------------------------------------
> HKR,Custom,NumCmd,,1
> HKR,Custom,Cmd0,,W/46/3f
>
> ;///////////End of nVidia Customization//////////////////////////
>
> ;////////////////Philips HAL customization///////////////////////
>
> HKR,,Address,,0x4a ; I2C address only important if
> ; VideoDecoder != AUTO
> HKR,,InterfaceType,,D1 ; "D1" (8 bit) or "DMSD16" (16 bit)
> HKR,,VideoDecoder,,AUTO ; "SAA7111", "SAA7111A", "SAA7112V0",
> ; "SAA7112", "SAA7113V0", "SAA7113",
> ; "SAA7113A", "SAA7114", "AUTO"
> HKR,,VideoStandard,,PAL ; "NTSC", "PAL", "SECAM",
> ; "NTSC_433_50", "NTSC_433_60",
> ; "NTSC_N", "PAL_433_60", "PAL_N",
> ; "PAL_M", "AUTO"
> HKR,,OutputFormat,,CCIR656 ; "YUV422", "YUV411", "YUV420",
> ; "YUV410", "YUV9", "RGB565",
> ; "RGB888", "CCIR656"
> HKR,,VBIMode,,RAW ; "RAW", "BASEBAND" (optinal)
> HKR,,VBILineWidth,,720 ; only needed if VBIMode used
> HKR,,VBILineOffset,,0 ; only needed if VBIMode used
> HKR,,EnableSlicer,,0 ; Enable slicer if it is present
> HKR,,Oversample,,4 ; 4..Use Philips 27MHz Frequency
> ; 5..Use 5x for old Microsoft CC- & NABTS Codecs
>
> ;---------------------------------------------------------------
> ; Subkey for video source 1
> ;---------------------------------------------------------------
> HKR,VidSrc1,InputMode,,0
> HKR,VidSrc1,SourceType,,VCR
> HKR,VidSrc1,VideoType,,Composite
> HKR,VidSrc1,ScalerFID,,DEFAULT
> HKR,VidSrc1,ScalerMode,,DEFAULT
>
> ;---------------------------------------------------------------
> ; Subkey for video source 2
> ;---------------------------------------------------------------
> HKR,VidSrc2,InputMode,,0
> HKR,VidSrc2,SourceType,,TV
> HKR,VidSrc2,VideoType,,Tuner
> HKR,VidSrc2,ScalerFID,,DEFAULT
> HKR,VidSrc2,ScalerMode,,DEFAULT
>
> ;---------------------------------------------------------------
> ; Subkey for video source 3
> ;---------------------------------------------------------------
> HKR,VidSrc3,InputMode,,6
> HKR,VidSrc3,SourceType,,VCR
> HKR,VidSrc3,VideoType,,SVHS
> HKR,VidSrc3,ScalerFID,,DEFAULT
> HKR,VidSrc3,ScalerMode,,DEFAULT
>
> ;---------------------------------------------------------------
> ; Subkey Description for video sources (optional)
> ;---------------------------------------------------------------
> ; Subkeyname : "VidSrcX" -> X = number of input
> ; InputMode : Decoder input mode for video source ("0" to "9")
> ; SourceType : "Camera", "TV", "VCR"
> ; VideoType : "Tuner", "Composite", "SVHS", "Extern_1"
> ; ScalerFID : "DEFAULT", "INVERT" (optional)
> ; ScalerMode : "DEFAULT", "HIGH_BANDWIDTH", "LOW_BANDWIDTH" (optional)
>
> ;---------------------------------------------------------------
> ; Subkey Description for teletext sources (optional)
> ;---------------------------------------------------------------
> ; Subkeyname : "TelSrcX" -> X = number of input
> ; InputType : "INTERNAL", ""EXTERNAL_1"
>
> ;---------------------------------------------------------------
> ; Subkey example for teletext source (optional)
> ;---------------------------------------------------------------
> ; HKR,TelSrc1,InputType,,INTERNAL
>
> ;---------------------------------------------------------------
> ; Subkey Description for default values (optional)
> ;---------------------------------------------------------------
> ; Subkeyname: "DefaultSaa7111" for defaults of Saa7111
> ; "DefaultSaa7111A" for defaults of Saa7111A
> ; "DefaultSaa7112V0" for defaults of Saa7112V0
> ; "DefaultSaa7112" for defaults of Saa7112
> ; "DefaultSaa7113V0" for defaults of Saa7113V0
> ; "DefaultSaa7113" for defaults of Saa7113
> ; "DefaultSaa7113A" for defaults of Saa7113A
> ; "DefaultSaa7114" for defaults of Saa7114
> ; Reg0xXXX : Value of register 0xXXX (hex) overwriting the
> ; value in the hardcoded default array. The register
> ; number in the key must be hex with leading 0x and
> ; must contain 3 digits!
>
> ;---------------------------------------------------------------
> ; Subkey for default values for the Saa7113
> ; The hardcoded default value 0x82 of register 0x40 is replaced
> ; with 0x02 which is necessary for PAL
> ;---------------------------------------------------------------
> HKR,DefaultSaa7113,Reg0x040,,0x02
> HKR,DefaultSaa7113V0,Reg0x040,,0x02
>
> ;---------------------------------------------------------------
> ; Subkey for default values for the Saa7114
> ; The hardcoded default value 0x00 of register 0x80 is replaced
> ; with 0x10 which is necessary for NTSC sliced data interface
> ;---------------------------------------------------------------
> ;HKR,DefaultSaa7114,Reg0x080,,0x40 ;only when EnableSlicer=1 !!!
>
> ;/////////////////End of Philips HAL customization//////////////
>
> [nvcap.Device.Interfaces]
> AddInterface={65e8773d-8f56-11d0-a3b9-00a0c9223196},"GLOBAL",VideoCapture,
> AddInterface={a799a801-a46d-11d0-a18c-00a02401dcd4},"GLOBAL",VideoCrossbar,
>
> [nvcap.Device.NT.Interfaces]
> AddInterface={65e8773d-8f56-11d0-a3b9-00a0c9223196},"GLOBAL",VideoCapture,
> AddInterface={a799a801-a46d-11d0-a18c-00a02401dcd4},"GLOBAL",VideoCrossbar,
>
> [VideoCapture]
> AddReg=VideoCapture.AddReg
>
> [VideoCrossbar]
> AddReg=VideoXBar.AddReg
>
> [VideoCapture.AddReg]
> HKR,,CLSID,,{17CCA71B-ECD7-11D0-B908-00A0C9223196}
> HKR,,FriendlyName,,%nvcap.Capture%
> HKR,,PageOutWhenUnopened,1,01
> HKR,,DontSuspendIfStreamsAreRunning,1,01
>
> [VideoXBar.AddReg]
> HKR,,CLSID,,{71F96460-78F3-11d0-A18C-00A0C9118956}
> HKR,,FriendlyName,,%nvcap.Crossbar%
>
> [nvcap.Device.NT.Services]
> AddService = nvcap,0x00000002,nvcap.ServiceInstall
>
> [nvcap.ServiceInstall]
> DisplayName = %nvcap.DeviceDesc%
> ServiceType = %SERVICE_KERNEL_DRIVER%
> StartType = %SERVICE_AUTO_START%
> ErrorControl = %SERVICE_ERROR_NORMAL%
> ServiceBinary = %12%\nvcap.sys
>
> ;---------------------------------------------------------------
> ; S t r i n g s
> ;---------------------------------------------------------------
>
> [Strings]
> ;----------------
> ; Non-Localizable
> ;----------------
>
> SERVICE_KERNEL_DRIVER=1
> SERVICE_AUTO_START=2
> SERVICE_ERROR_NORMAL=1
>
> ;----------------
> ; Localizable
> ;----------------
> Msft = "nVidia Corporation"
> MS = "nVidia"
> captureClassName = "Sound, video and game controllers"
> nvcap.DeviceDesc = "nVidia WDM Video Capture (universal)"
> nvcap.Capture = "nVidia WDM Video Capture (universal)"
> nvcap.Crossbar = "nVidia WDM Video Crossbar (universal)"
> Disk1Name = "nVidia WDM Drivers Disk 1"
>
> ################################################## #######################################
> --
>
>
> ) ___ ______
> (__/_____) /) (, / )
> / __ _ (/ _ /---( __ _/_ _
> / (_(_/ (_(__/ )_(_(_ ) / ____)(_(_/ (_(__/_)_
> (______) (_/ (
>

Thanks for this :) it all seems to be looking exactly like my one here as I
first changed mine to PAL (in nvcap.inf file) and then reinstalled the
nvcap.inf by right clicking and choosing Install on the menu "and" I also
tried tweaking nvcap.inf first then installing the whole WDM driver package
and even though it appears to be set to PAL in the registry, it still
reverts to NTSC_M each time.... Anyways, I'll reboot now that I've messed
with the registry and see if it works this time and I'll repost back as to
what happens :) thanks

NeonBlue
August 17th 04, 10:01 PM
One problem solved it seems :)

It appears that now I have changed the registry to PAL it has rebooted and
it has miraculously set itself to PAL_B mode!!!! so I am guessing that PAL_I
was some similar standard that seemed to work for me but the real one is
PAL_B and now the picture is properly centred :) so my sincere thanks for
the help :) now I just have to sort out why I can't capture any frames at
all in VirtualDub (see problem 2 in my other post: Subject: GeforceFX 5900XT
VTD128 card gives picture but not capturing video at all) and I will be all
set..... lol the joy of computers and their many errors, eh?

"Granulated" > wrote in message
...
> On Fri, 13 Aug 2004 01:19:39 +0100 "NeonBlue" >
> meeped :
>
>>HKR,,VideoStandard,,PAL_I ; "NTSC", "PAL", "SECAM",
>> ; "NTSC_433_50", "NTSC_433_60",
>> ; "NTSC_N", "PAL_433_60", "PAL_N",
>> ; "PAL_M", "AUTO"
>
>
> WHy did you put PAL_I ? it's not even in the list !
> I
> --
>
>
> ) ___ ______
> (__/_____) /) (, / )
> / __ _ (/ _ /---( __ _/_ _
> / (_(_/ (_(__/ )_(_(_ ) / ____)(_(_/ (_(__/_)_
> (______) (_/ (
>

paluser
August 24th 05, 07:08 AM
Hi NeonBlue

I am facing the exact same problem with my NVidia Personal Cinema
GeForce FX 5700. I have tried changing the nvcap.inf file, installing
it or reinstalling WDM with modified inf file but no luck. For me, I am
not even able to modify the TV tuner type with any application. Can you
please tell me which registry setting you changed to solve the
problem?

Thanks


--
paluser
------------------------------------------------------------------------
paluser's Profile: http://extremetechsupport.com/forum/member.phtml?userid=1525
View this thread: http://extremetechsupport.com/forum/showthread.phtml?t=57296