PDA

View Full Version : Force a 1366 x 1024 resolution


Stefan Moser
October 22nd 03, 06:55 PM
Hello,

Im trying to force a resolution of 1366 x 1024 on the DVI Port of a FX 5200
graphic's card running under Windows XP.

Problem the connected Beamer Sony vpl-hs10 is not recognized correct by
Windows XP, it is only possible to set the resolution to max 1024 x 768.

Does anybody know a way to force a different resolution, WXGA would also be
great.

Any help is very welcome.

Thank's for your help.

Regards,
S.Moser

phobos
October 22nd 03, 09:26 PM
Stefan Moser wrote:

> Hello,
>
> Im trying to force a resolution of 1366 x 1024 on the DVI Port of a FX 5200
> graphic's card running under Windows XP.
>
> Problem the connected Beamer Sony vpl-hs10 is not recognized correct by
> Windows XP, it is only possible to set the resolution to max 1024 x 768.
>
> Does anybody know a way to force a different resolution, WXGA would also be
> great.
>
> Any help is very welcome.
>
> Thank's for your help.
>
> Regards,
> S.Moser
>
>

Whether you're using this as a secondary monitor or not, you'll need to
have the appropriate drivers installed for the device to select all it's
resolutions and refresh rates. Check Sony's site for a monitor .inf
file. 1366x1024 is the native resolution correct? Most of the time
setting it to Plug and Play Monitor won't work for that (unless it's a
4:3 aspect ratio display mode).

Alex Chan
October 23rd 03, 03:19 AM
Powerstrip will work for you
i have mine set to 1280*768

"Stefan Moser" > wrote in message
...
> Hello,
>
> Im trying to force a resolution of 1366 x 1024 on the DVI Port of a FX
5200
> graphic's card running under Windows XP.
>
> Problem the connected Beamer Sony vpl-hs10 is not recognized correct by
> Windows XP, it is only possible to set the resolution to max 1024 x 768.
>
> Does anybody know a way to force a different resolution, WXGA would also
be
> great.
>
> Any help is very welcome.
>
> Thank's for your help.
>
> Regards,
> S.Moser
>
>

Stefan Moser
October 23rd 03, 05:54 PM
Ill try it,
Thank's for your help
S.Moser


"Alex Chan" > schrieb im Newsbeitrag
nk.net...
> Powerstrip will work for you
> i have mine set to 1280*768
>
> "Stefan Moser" > wrote in message
> ...
> > Hello,
> >
> > Im trying to force a resolution of 1366 x 1024 on the DVI Port of a FX
> 5200
> > graphic's card running under Windows XP.
> >
> > Problem the connected Beamer Sony vpl-hs10 is not recognized correct by
> > Windows XP, it is only possible to set the resolution to max 1024 x 768.
> >
> > Does anybody know a way to force a different resolution, WXGA would also
> be
> > great.
> >
> > Any help is very welcome.
> >
> > Thank's for your help.
> >
> > Regards,
> > S.Moser
> >
> >
>
>