PDA

View Full Version : Re: 8KNXP and ATI Radeon 9800 Pro 128 Problem


HardwareTek
August 19th 03, 03:42 PM
I have no problems running that combo. Maybe it's a defective mobo.

Ron Zahavi
August 19th 03, 07:27 PM
I am running the same mobo and card without such problems.

Kevin > wrote in message >...
> Has anyone had any success with an ATI Radeon 9800 Pro 128 in the GigaByte GA-8KNXP?
>
> Here's my problem. I built a system with the 8KNXP Motherboard and the ATI Radeon 9800 Pro 128.
> When I turn on the power all I get is 1 long beep with 2 short beeps indicating a video problem.
> GigaByte has verified that this Video Card works great with this MB. I've successfully used the same
> video card in another pc. I can boot successfully with a PCI video card as well. I've played around with
> every BIOS setting and even swithed the AGP port to 4X with no luck...still 1 long, 2 short beeps. I put one
> of my other AGP cards in this board and they all produce the same 1 long beep wth 2 short beeps. Has
> anyone else experienced this? Bad AGP port/motherboard?
>
> I've also not been able to successfully load
> up XP with the PCI card in. As soon as I click on any drop down menus or buttons other than next it locks
> up and also locks up randomly during the load. Never successfully loads. Suspect the video card but not
> 100% sure as I only have AGP cards (None of them work in this 8KNXP either!)
>
> Thanks!
> Kevin